Difference between revisions of "Greyfin A2 laser cutter"

From Norwich Hackspace
Jump to navigation Jump to search
 
(31 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
== DRAFT copied from LHS wiki ==
+
<div id="mw-content-text" lang="en" dir="ltr" class="mw-content-ltr"><div style="font-weight: bold; text-align: center; width: 60% margin-left: auto; margin-right: auto; font-size: 1.3em; border: 2px solid red;">
 +
<p><span style="color:red">'''RED'''</span> equipment: Do not use without specific training.
 +
<br /></div>
 +
<br>
  
 
==Training==
 
==Training==
  
−
You must not use the laser cutter without being trained. The laser cutter is unlikely to hurt you, but you can easily hurt '''it''' without training. For more information about laser cutter training, see the [[Lasercutter Training]] page.
+
You must not use the laser cutter without being trained. The laser cutter is unlikely to hurt you, but you can easily hurt '''it''' without training. For more information about laser cutter training ask on Slack in the lasercutter channel
  
 
==Costs==
 
==Costs==
  
 
* Training - Free
 
* Training - Free
−
* Usage - £x/hour
+
* Usage - £5/hour, £1/10minutes
 
* Consumables - Bring your own and/or use what is in the off cuts bin or purchase from the HS stock via iZettle, but always ensure (rather than assume) it's [[Laser_Cutter/Instructions#Chlorine_Testing_and_Material_Safety|laser safe]].
 
* Consumables - Bring your own and/or use what is in the off cuts bin or purchase from the HS stock via iZettle, but always ensure (rather than assume) it's [[Laser_Cutter/Instructions#Chlorine_Testing_and_Material_Safety|laser safe]].
 +
 +
==How to==
 +
* [[Lasercut Illuminated Acrylic sign]]
 +
 +
==Tech specs==
 +
{| class="wikitable"
 +
|-
 +
! Spec !! Value
 +
|-
 +
| Laser power: || 60W Co2 laser tube
 +
|-
 +
| Maximum cutting area: || 600 x 400mm
 +
|-
 +
| Body dimensions:|| 1,360 x 880 x 1,070mm
 +
|-
 +
| Repeatability:|| ± 0.05mm
 +
|-
 +
| Power source:|| AC 110 – 220V ± 10%, 50 – 60Hz
 +
|-
 +
| Total power:|| <1,000 W
 +
|-
 +
| Operating temperature:|| 0 – 45 °C
 +
|-
 +
| Humidity:|| 5 – 95%
 +
|-
 +
| Minimum character size:|| 2mm Chinese character alphanumeric 1mm
 +
|-
 +
| Corresponding data format:|| BMP, PLT, DST, DXF, and AI
 +
|-
 +
| Operating system:|| stepper motor
 +
|-
 +
| Cooling system:|| water-cooled
 +
|-
 +
| Control system:|| Ruida 6442G controller + Lightburn
 +
|-
 +
| Weight:|| 170kg
 +
|-
 +
| Kerf:|| 0.1mm
 +
|-
 +
|}
  
 
== Laser Cutter instructions ==  
 
== Laser Cutter instructions ==  
Line 17: Line 60:
 
==Rules==
 
==Rules==
 
;'''1) Never leave the laser cutter running unattended*'''
 
;'''1) Never leave the laser cutter running unattended*'''
−
:You should always be next to the Laser Cutter and paying attention to it while the laser is active, we have tall chairs and you can sit your laptop on the lid if it's a long job. ''I cannot state how important it is to monitor the laser cutter whilst it is in use, it knows when you're not watching and will burst into flames the second you turn your back.'' If you have to leave the laser cutter unattended, use the pause button. '''In case of fire''': use the CO<sub>2</sub> extinguisher by the laser cutter first. If you can't control the fire, use the powder extinguisher and/or raise the fire alarm.
+
:You should always be next to the Laser Cutter and paying attention to it while the laser is active, ''I cannot state how important it is to monitor the laser cutter whilst it is in use, it knows when you're not watching and will burst into flames the second you turn your back.'' If you have to leave the laser cutter unattended, use the pause button. '''In case of fire''': use the fire blanket first if that doesn't work use the CO<sub>2</sub> extinguisher by the laser cutter and/or raise the fire alarm.
  
−
;'''2) If the Laser Cutter breaks or behaves abnormally, put it Out of Order and post to the mailing list'''
+
;'''2) If the Laser Cutter breaks or behaves abnormally, put it Out of Order and post on Slack'''
−
:If the laser cutter starts behaving weirdly, doesn't cut correctly with the correct settings, makes <strike>interesting</strike> worrying noises, any of the ancillary machines (cooler/extractor/air assist) are not working properly or if there has been a fire, place it out of order on the [[Silvertail A0 Laser Cutter#Using ACnode|ACNode]] and post to the [[Mailing List]] detailing what went wrong. If you don't use the mailing list, get someone else to post for you.
+
:If the laser cutter starts behaving weirdly, doesn't cut correctly with the correct settings, makes <strike>interesting</strike> worrying noises, any of the ancillary machines (cooler/extractor/air assist) are not working properly or if there has been a fire, place it out of order and post to Slack detailing what went wrong. If you don't use slack, get someone else to post for you.
  
−
;'''3) Do not use another members card, likewise do not let another member use your card*'''
+
;'''3) Do not use if you haven't had training'''
−
:ACnode is the only system we have to make sure enthusiastic untrained individuals don't use the laser cutter until they are trained, protecting this delicate and breakable machine. Every trained member will have access using their card; if they don't, then they do not have access to the machine. If a trained member has forgotten their card, they can register a new card using the membership kiosk. A trained member can do a job for another person as long as the trained member is the one using the laser cutter.
+
A trained member can do a job for another person as long as the trained member is the one using the laser cutter.
  
−
;'''4) You must be a member of London Hackspace to use the laser cutter'''
+
;'''4) You must be a member of Norwich Hackspace to use the laser cutter'''
−
:The Laser Cutter is a machine owned and operated by London Hackspace, therefore you must be a member to use it. If you were a trained member and your membership payments have lapsed, access will automatically be revoked until you become a member again. Having a trained member cut a job for a non-member is perfectly fine.
+
:The Laser Cutter is a machine owned and operated by Norwich Hackspace, therefore you must be a member to use it. If you were a trained member and your membership payments have lapsed, access will automatically be revoked until you become a member again. Having a trained member cut a job for a non-member is perfectly fine.
  
 
;'''5) Always pay for your usage'''
 
;'''5) Always pay for your usage'''
−
:The Laser Cutter costs £6/hour to use. You only have to pay for the time that the laser is active for, not any setup or preparation time. All money goes towards maintenance and buying consumables like mirrors, lenses and new laser tubes. If there is not enough money to cover the cost of consumables when something needs replacing due to people using the Laser Cutter without paying, they simply won't be bought, rendering the Laser Cutter out of order until we find another way of raising money to cover the costs.
+
:The Laser Cutter costs £5/hour to use. You only have to pay for the time that the laser is active for, not any setup or preparation time. All money goes towards maintenance and buying consumables like mirrors, lenses and new laser tubes. If there is not enough money to cover the cost of consumables when something needs replacing due to people using the Laser Cutter without paying, they simply won't be bought, rendering the Laser Cutter out of order until we find another way of raising money to cover the costs.
  
 
;'''6) Only cut approved materials of an acceptable thickness, never cut materials on the banned list or materials that are too thick.*'''
 
;'''6) Only cut approved materials of an acceptable thickness, never cut materials on the banned list or materials that are too thick.*'''
 
:If you would like to cut a material that is not on the Approved List, contact one of the maintainers, we will do some research and testing (or instruct you to do the testing) to see if the materials is safe to laser cut, if it is, it will be added to the Approved List. Acceptable thicknesses are shown on the cutting parameters page.
 
:If you would like to cut a material that is not on the Approved List, contact one of the maintainers, we will do some research and testing (or instruct you to do the testing) to see if the materials is safe to laser cut, if it is, it will be added to the Approved List. Acceptable thicknesses are shown on the cutting parameters page.
  
−
;'''7) Log all jobs correctly in the logbook'''
+
;'''7) Log all jobs correctly in the logbook - not currently used'''
−
:Currently, the logbook is the only way the maintainers can view the status of the cutter and how it's performing on a day-to-day basis. It is vital that you complete this for each job done with any power settings used; you can add multiple jobs together into a single log if they used the same settings, material and were all successful. A link to the logbook is on the desktop, on the bookmarks bar or [http://bit.ly/LaserLogbookForm here].
+
:Currently, the logbook is the only way the maintainers can view the status of the cutter and how it's performing on a day-to-day basis. It is vital that you complete this for each job done with any power settings used; you can add multiple jobs together into a single log if they used the same settings, material and were all successful. A link to the logbook is on the desktop, on the bookmarks bar or [ here].
  
 
;'''8) Do not disable any of the ancillary components such as the air assist, extractor or cooler'''
 
;'''8) Do not disable any of the ancillary components such as the air assist, extractor or cooler'''
Line 48: Line 91:
  
 
<u>'''All bans will be made public and be able to be appealed against.'''</u>
 
<u>'''All bans will be made public and be able to be appealed against.'''</u>
 +
 +
==Software==
 +
* [https://lightburnsoftware.com/ Lightburn] - The greatest lasercutter software ever
 +
* [https://xoihazard.com/tools/halftone/ Halftone vector generator] - Takes a picture and converts it into a representation of the image using ploygons. Its a cool way to get around the lack of greyscale functionality
  
 
==Where to get supplies/consumables/materials==
 
==Where to get supplies/consumables/materials==
Line 61: Line 108:
 
===Allowed===
 
===Allowed===
 
====Woods====
 
====Woods====
−
* Laser-grade MDF (max 8mm)
 
 
* Laser-grade plywood
 
* Laser-grade plywood
 
** Birch ply (max 9mm)
 
** Birch ply (max 9mm)
Line 67: Line 113:
 
* Balsa wood
 
* Balsa wood
 
* Paper (cutting only)
 
* Paper (cutting only)
−
* Card/Cardboard (cutting only)
+
* Card/Cardboard (cutting only) [[tips on lasercutting card]]
 +
* MDF - small amounts of MDF or engraving on MDF products is ok'ish
  
 
====Plastics====
 
====Plastics====
 
* Thin Polypropylene sheet (<1mm)  
 
* Thin Polypropylene sheet (<1mm)  
 
* Acrylic (max 10mm)
 
* Acrylic (max 10mm)
−
* Foamcore (non-PVC variety)
+
* [[tips on lasercutting foam | Foamcore]] (non-PVC variety)
 
* Correx (Genuine non PVC)
 
* Correx (Genuine non PVC)
 
* Depron foam (Fire risk, must be closely monitored)
 
* Depron foam (Fire risk, must be closely monitored)
Line 95: Line 142:
 
If you want to cut a material which is not on this list, contact one of the maintainers and get them to OK it first.
 
If you want to cut a material which is not on this list, contact one of the maintainers and get them to OK it first.
  
−
* Cork (fire risk)
 
−
* Wood which isn't explicitly laser-grade (laser contamination, fire risk, emissions)
 
 
* Food (laser contamination, fire risk, emissions)
 
* Food (laser contamination, fire risk, emissions)
 
* Body parts
 
* Body parts
Line 111: Line 156:
 
* Shuttering ply (laser contamination, fire risk, emissions)
 
* Shuttering ply (laser contamination, fire risk, emissions)
 
* Latex (laser contamination, fire risk, emissions)
 
* Latex (laser contamination, fire risk, emissions)
−
* Leather, all. (laser contamination)
 
  
 
== Cutting Parameters ==
 
== Cutting Parameters ==
−
'''For list of material settings, see [[Silvertail_A0_Laser_Cutter/Cutting_Parameters|Cutting Parameters]].
+
'''For list of material settings, see [[A2_Greyfin_Laser_Cutter_Materials_Information|Cutting Parameters]].
−
 
 
  
 
== Trainers and maintainers ==
 
== Trainers and maintainers ==
Line 121: Line 164:
 
If you have questions or problems with the laser cutter, please speak to one of these people:
 
If you have questions or problems with the laser cutter, please speak to one of these people:
  
−
* Plexer
+
* Ben - Plexer
 +
* Tim P
 +
* Nicholas W
 +
* Peter H
  
 
==Technical Specs==
 
==Technical Specs==
−
* [http://www.recilaser.com/en/productInfo/fc9181e93b448cac013b44f673270de5.htm Reci Z2] laser tube (90W rated power, 100W max) - recommended max tube current 25mA
+
* Glass laser tube (80W rated power) - recommended max tube current 22mA
 
* "MYJG-80R" laser power supply
 
* "MYJG-80R" laser power supply
−
* Leetro [http://www.leetro.com/english/sale/20.html MPC6515C] (v2.0) motion controller
+
* Ruida motion controller
−
* LaserCut 5.3 software.
+
* Lightburn software.
 
* [http://www.teyuchiller.com/Products/ChillerCW52001400Wco.html S&A CW-5200] water chiller
 
* [http://www.teyuchiller.com/Products/ChillerCW52001400Wco.html S&A CW-5200] water chiller
 +
 +
==Tips&Tricks==
 +
* Print&Cut - [https://www.youtube.com/watch?v=pOl75orZw3I Saving a job that didn't cut all the way through]
  
 
[[Category:Tools for use on wood]]
 
[[Category:Tools for use on wood]]
 
[[Category:Tools for use on plastic]]
 
[[Category:Tools for use on plastic]]
 +
 +
==Information for trainers==
 +
 +
Checklist for induction - Trainers Guide to Laser Cutting
 +
 +
Steps
 +
 +
*Never leave the room while the laser cutter is operating, it's ok to use the computer or cutting mat for example but they must keep an eye on the machine at all times
 +
*If there is a flare up/fire that doesn't self extinguish lift the lid and try to smother it with another piece of stock or use the fire blanket, if required use the CO2 extinguisher that's on the floor
 +
*Introduce the laser cutter and point all the functions i.e. the bed size, where the cooler is, the extractor fan, menu selector
 +
*Always mention safety and safety features throughout, start with making sure the coolant pump and laser is turned on, if water cooler makes a continuous beep something is wrong and needs to be investigated
 +
*Talk about emergency stop, if anything goes wrong press it and the machine will stop
 +
*Open the cover. Mention the different parts, laser head, mirrors, lid switch for laser cut off, the laser head is an entanglement hazard when it's being positioned with the lid open ensure the users don't place anything in the way, fingers, jewellery, clothing etc...
 +
*Mention what the lid switch does and how it can be useful but make sure it is not tampered with
 +
*Also mention the pneumatic arm will just hold it open but won't soft close.
 +
*Move on to raising and lowering the bed and why it's needed
 +
*Talk about the menu but might be best to show it off when you start sending jobs to it
 +
*Mention the materials we supply and what materials are allowed. Also mention off cuts
 +
*Talk about the izettle for payment of laser time and materials
 +
*Talk about test cutting and why it's important
 +
*Move to the computer. Prep a job (make it as small as possible) and send it to the laser cutter to show how Lightburn works
 +
*Turn on the extraction fan and air assist before pressing start on the laser, turn both off a few seconds after the job is done
 +
*On the laser cutter, after the job is sent, talk about the menu options like frame and how to set the user origin
 +
*Cut your piece
 +
*Show the interrupt working by opening the cover, they can use this to quick stop the laser
 +
*Get them to do the same. Keep it simple though, this is an induction
 +
*You have some time while the laser cutter is running to talk about relevant scenarios: so mention if there is a fire what to do, how to report issues with the laser and what issues to look out for.

Latest revision as of 17:25, 12 February 2024

RED equipment: Do not use without specific training.


Training

You must not use the laser cutter without being trained. The laser cutter is unlikely to hurt you, but you can easily hurt it without training. For more information about laser cutter training ask on Slack in the lasercutter channel

Costs

  • Training - Free
  • Usage - £5/hour, £1/10minutes
  • Consumables - Bring your own and/or use what is in the off cuts bin or purchase from the HS stock via iZettle, but always ensure (rather than assume) it's laser safe.

How to

Tech specs

Spec Value
Laser power: 60W Co2 laser tube
Maximum cutting area: 600 x 400mm
Body dimensions: 1,360 x 880 x 1,070mm
Repeatability: ± 0.05mm
Power source: AC 110 – 220V ± 10%, 50 – 60Hz
Total power: <1,000 W
Operating temperature: 0 – 45 °C
Humidity: 5 – 95%
Minimum character size: 2mm Chinese character alphanumeric 1mm
Corresponding data format: BMP, PLT, DST, DXF, and AI
Operating system: stepper motor
Cooling system: water-cooled
Control system: Ruida 6442G controller + Lightburn
Weight: 170kg
Kerf: 0.1mm

Laser Cutter instructions

Laser Cutter Instructions

Rules

1) Never leave the laser cutter running unattended*
You should always be next to the Laser Cutter and paying attention to it while the laser is active, I cannot state how important it is to monitor the laser cutter whilst it is in use, it knows when you're not watching and will burst into flames the second you turn your back. If you have to leave the laser cutter unattended, use the pause button. In case of fire: use the fire blanket first if that doesn't work use the CO2 extinguisher by the laser cutter and/or raise the fire alarm.
2) If the Laser Cutter breaks or behaves abnormally, put it Out of Order and post on Slack
If the laser cutter starts behaving weirdly, doesn't cut correctly with the correct settings, makes interesting worrying noises, any of the ancillary machines (cooler/extractor/air assist) are not working properly or if there has been a fire, place it out of order and post to Slack detailing what went wrong. If you don't use slack, get someone else to post for you.
3) Do not use if you haven't had training

A trained member can do a job for another person as long as the trained member is the one using the laser cutter.

4) You must be a member of Norwich Hackspace to use the laser cutter
The Laser Cutter is a machine owned and operated by Norwich Hackspace, therefore you must be a member to use it. If you were a trained member and your membership payments have lapsed, access will automatically be revoked until you become a member again. Having a trained member cut a job for a non-member is perfectly fine.
5) Always pay for your usage
The Laser Cutter costs £5/hour to use. You only have to pay for the time that the laser is active for, not any setup or preparation time. All money goes towards maintenance and buying consumables like mirrors, lenses and new laser tubes. If there is not enough money to cover the cost of consumables when something needs replacing due to people using the Laser Cutter without paying, they simply won't be bought, rendering the Laser Cutter out of order until we find another way of raising money to cover the costs.
6) Only cut approved materials of an acceptable thickness, never cut materials on the banned list or materials that are too thick.*
If you would like to cut a material that is not on the Approved List, contact one of the maintainers, we will do some research and testing (or instruct you to do the testing) to see if the materials is safe to laser cut, if it is, it will be added to the Approved List. Acceptable thicknesses are shown on the cutting parameters page.
7) Log all jobs correctly in the logbook - not currently used
Currently, the logbook is the only way the maintainers can view the status of the cutter and how it's performing on a day-to-day basis. It is vital that you complete this for each job done with any power settings used; you can add multiple jobs together into a single log if they used the same settings, material and were all successful. A link to the logbook is on the desktop, on the bookmarks bar or [ here].
8) Do not disable any of the ancillary components such as the air assist, extractor or cooler
These all have their purpose in protecting the Laser Cutter and making it work correctly, please do not disable any of these for any reason whatsoever.
9) Don't place cutting waste in the scrap bins
The scrap bins are only for usable bits of material you don't want any more. A usable bit of material is anything 10cm2 or larger without any cuts or engraving on it. Please snap any unusable bits off to make it as small as possible. Cutting waste is fully recyclable and can be placed in any bin in the hackspace, PLEASE DO NOT PUT IT IN THE SCRAPS BIN!

Violation of these rules will result in either a verbal warning, a written warning, being made to redo the training, a temporary ban or in the most extreme cases a permanent ban issues by the maintainers. We will try and be as fair as possible and we really don't want to punish people and prevent them from using the machine, we'd much rather educate about the correct way to use it. However, this is not an excuse for rules ignorance.

*Violation of rules 1 or 3 (or excessive violation of rule 6) will result in an immediate ban without warning.

All bans will be made public and be able to be appealed against.

Software

  • Lightburn - The greatest lasercutter software ever
  • Halftone vector generator - Takes a picture and converts it into a representation of the image using ploygons. Its a cool way to get around the lack of greyscale functionality

Where to get supplies/consumables/materials

  • Hamar - 16A Bidder Street London, E16 4ST. 8am-5pm Mon-Fri
  • Hobarts - mail order
  • Kitronic - mail order, good ply
  • Bluprint models Arch 258, Paradise Row, Bethnal Green, London. E2 9LE - On Cambridge Heath Road - & mail order - good for MDF, their perspex is shit
  • MDF Cut to Size - 413 Wick Lane, Bow, London, E3 2JG - Pay for the size you want cut
  • The Natural Workshop (Website) - The Natural Workshop (eBay)- mail order
  • Jennor Timber, Lockfield Avenue, Enfield EN3 7QL, or 13 Braintree Rd, Ruislip HA4 0EJ. Laser grade birch ply. Not listed on their website, but they do it - it's in their catalogue, and they know their stuff. Give them a call.

List of allowed and banned materials

Allowed

Woods

  • Laser-grade plywood
    • Birch ply (max 9mm)
    • Poplar ply (max 9mm)
  • Balsa wood
  • Paper (cutting only)
  • Card/Cardboard (cutting only) tips on lasercutting card
  • MDF - small amounts of MDF or engraving on MDF products is ok'ish

Plastics

  • Thin Polypropylene sheet (<1mm)
  • Acrylic (max 10mm)
  • Foamcore (non-PVC variety)
  • Correx (Genuine non PVC)
  • Depron foam (Fire risk, must be closely monitored)
  • EVA Foam (if real)
  • Delrin (max 8mm)

Textiles

  • Cloth/felt/hemp/cotton (Not plastic-impregnated fabric)
  • Polar Fleece

For engraving only

  • Stone (Engrave only)
  • Ceramic tile (Engrave only)
  • Non-resinous wood IE hardwood (Engrave only)
  • Glass (Engrave only)
  • Anodized Aluminium (Engrave only)

Explicitly banned

You should only be cutting materials on the Allowed list.

If you want to cut a material which is not on this list, contact one of the maintainers and get them to OK it first.

  • Food (laser contamination, fire risk, emissions)
  • Body parts
  • Plastics containing PVC (laser contamination, emissions)
  • Plastics containing ABS (laser contamination, fire risk, cyanide emission)
  • Fibreglass (laser contamination, fire risk, emissions)
  • Circuit boards (laser contamination, fire risk, emissions)
  • Polycarbonate (laser contamination, fire risk)
  • All metal (except engraving anodized aluminium)
  • Polystyrene (laser contamination, fire risk, emissions)
  • Polypropylene (laser contamination, fire risk, emissions)
  • HDPE (high-density polyethylene or polyethylene) (laser contamination, fire risk, emissions)
  • Carbon fibre (laser contamination, fire risk, emissions)
  • Shuttering ply (laser contamination, fire risk, emissions)
  • Latex (laser contamination, fire risk, emissions)

Cutting Parameters

For list of material settings, see Cutting Parameters.

Trainers and maintainers

If you have questions or problems with the laser cutter, please speak to one of these people:

  • Ben - Plexer
  • Tim P
  • Nicholas W
  • Peter H

Technical Specs

  • Glass laser tube (80W rated power) - recommended max tube current 22mA
  • "MYJG-80R" laser power supply
  • Ruida motion controller
  • Lightburn software.
  • S&A CW-5200 water chiller

Tips&Tricks

Information for trainers

Checklist for induction - Trainers Guide to Laser Cutting

Steps

  • Never leave the room while the laser cutter is operating, it's ok to use the computer or cutting mat for example but they must keep an eye on the machine at all times
  • If there is a flare up/fire that doesn't self extinguish lift the lid and try to smother it with another piece of stock or use the fire blanket, if required use the CO2 extinguisher that's on the floor
  • Introduce the laser cutter and point all the functions i.e. the bed size, where the cooler is, the extractor fan, menu selector
  • Always mention safety and safety features throughout, start with making sure the coolant pump and laser is turned on, if water cooler makes a continuous beep something is wrong and needs to be investigated
  • Talk about emergency stop, if anything goes wrong press it and the machine will stop
  • Open the cover. Mention the different parts, laser head, mirrors, lid switch for laser cut off, the laser head is an entanglement hazard when it's being positioned with the lid open ensure the users don't place anything in the way, fingers, jewellery, clothing etc...
  • Mention what the lid switch does and how it can be useful but make sure it is not tampered with
  • Also mention the pneumatic arm will just hold it open but won't soft close.
  • Move on to raising and lowering the bed and why it's needed
  • Talk about the menu but might be best to show it off when you start sending jobs to it
  • Mention the materials we supply and what materials are allowed. Also mention off cuts
  • Talk about the izettle for payment of laser time and materials
  • Talk about test cutting and why it's important
  • Move to the computer. Prep a job (make it as small as possible) and send it to the laser cutter to show how Lightburn works
  • Turn on the extraction fan and air assist before pressing start on the laser, turn both off a few seconds after the job is done
  • On the laser cutter, after the job is sent, talk about the menu options like frame and how to set the user origin
  • Cut your piece
  • Show the interrupt working by opening the cover, they can use this to quick stop the laser
  • Get them to do the same. Keep it simple though, this is an induction
  • You have some time while the laser cutter is running to talk about relevant scenarios: so mention if there is a fire what to do, how to report issues with the laser and what issues to look out for.
Retrieved from ‘http://wiki.norwichhackspace.org/index.php?title=Greyfin_A2_laser_cutter&oldid=1759’