Difference between revisions of "3D print Room"
Jump to navigation
Jump to search
Nicholas w (talk | contribs) |
Nicholas w (talk | contribs) |
||
| Line 6: | Line 6: | ||
* <span style="color:green">'''GREEN'''</span> - Fill your boots | * <span style="color:green">'''GREEN'''</span> - Fill your boots | ||
<BR> | <BR> | ||
| + | |||
| + | == Comparison of SLA vs D... p... something (Deposit...something) == | ||
| + | |||
| + | == Comparison of 3d print filament materials == | ||
| + | ====PLA==== | ||
| + | biodegradable, lower temperature, less toxic. | ||
| + | specific brands vary considerably (~10%?) | ||
| + | ====ABS==== | ||
| + | more toxic, stronger? needs heated bed | ||
| + | ====P2 pg a.... something==== | ||
| + | no idea. new | ||
| + | ====Resin: white==== | ||
| + | brittle, not as strong, needs UV curing (in water) after print | ||
| + | |||
| + | |||
== wanhao d7 == | == wanhao d7 == | ||
Revision as of 22:47, 16 October 2020
Contents
Training Requirements
Whilst all use of Tools and Equipment is at your own risk each one will have a colour code denoting how much knowledge is required to operated it
- RED - You must be inducted by the maintainer / trainer and signed off as being competent
- ORANGE - You must read all the provided information and assess yourself as being competent of using the tool safely, if in doubt ask the area maintainer or other member for help
- GREEN - Fill your boots
Comparison of SLA vs D... p... something (Deposit...something)
Comparison of 3d print filament materials
PLA
biodegradable, lower temperature, less toxic. specific brands vary considerably (~10%?)
ABS
more toxic, stronger? needs heated bed
P2 pg a.... something
no idea. new
Resin: white
brittle, not as strong, needs UV curing (in water) after print
wanhao d7
Technology: DLP (Digital Light Processing)
Build Volume: 120 x 68 x 180mm
Layer Resolution: 35 microns
Printable materials: 405 NM UV resin
Raspberry pi runs NanoDLP, which is the software which sends the 'plates' to the printer. Connect to NanoDLP from the hackspace computer, or on a computer on the same network.
Ultimaker 2
Ender
CR-10
Printer
Hackspace PC
Resin Cure stuff
Fridge of filaments + other nick-nacks
Airbrush (somewhere)
"we have a spray booth and i have a fan and tube i can donate"
