Difference between revisions of "3D print Room"
Jump to navigation
Jump to search
Nicholas w (talk | contribs) m (airbrush not on alans spreadsheet) |
Ben Norcutt (talk | contribs) |
||
| Line 1: | Line 1: | ||
| + | ==Training Requirements== | ||
| + | Whilst all use of Tools and Equipment is at your own risk each one will have a colour code denoting how much knowledge is required to operated it | ||
| + | |||
| + | * <span style="color:red">'''RED'''</span> - You must be inducted by the maintainer / trainer and signed off as being competent | ||
| + | * <span style="color:orange">'''ORANGE'''</span> - You must read all the provided information and assess yourself as being competent of using the tool safely, if in doubt ask the area maintainer or other member for help | ||
| + | * <span style="color:green">'''GREEN'''</span> - Fill your boots | ||
| + | <BR> | ||
== wanhao d7 == | == wanhao d7 == | ||
Revision as of 16:08, 28 September 2020
Contents
Training Requirements
Whilst all use of Tools and Equipment is at your own risk each one will have a colour code denoting how much knowledge is required to operated it
- RED - You must be inducted by the maintainer / trainer and signed off as being competent
- ORANGE - You must read all the provided information and assess yourself as being competent of using the tool safely, if in doubt ask the area maintainer or other member for help
- GREEN - Fill your boots
wanhao d7
Technology: DLP (Digital Light Processing)
Build Volume: 120 x 68 x 180mm
Layer Resolution: 35 microns
Printable materials: 405 NM UV resin
Raspberry pi runs NanoDLP, which is the software which sends the 'plates' to the printer. Connect to NanoDLP from the hackspace computer, or on a computer on the same network.
Ultimaker 2
Ender
CR-10
Printer
Hackspace PC
Resin Cure stuff
Fridge of filaments + other nick-nacks
Airbrush (somewhere)
"we have a spray booth and i have a fan and tube i can donate"
