Difference between revisions of "3D print Room"
Tim Parnell (talk | contribs) (added the Phrozen) |
Tim Parnell (talk | contribs) (Added wash and cure station) |
||
| Line 49: | Line 49: | ||
The touch screen on the Phrozen controls printing from USB stick.<br> | The touch screen on the Phrozen controls printing from USB stick.<br> | ||
Purchased in Xxxxx for £XXX.XX using Hackspace funds. <br> | Purchased in Xxxxx for £XXX.XX using Hackspace funds. <br> | ||
| + | |||
| + | == Anycubic Wash & Cure 2.0 == | ||
| + | Wash and Cure station for use with DLP prints. | ||
| + | Filled with Flash floor cleaner. | ||
Revision as of 13:44, 28 August 2021
Contents
- 1 Maintainer: Dan @Dan Robertson
- 2 Training Requirements
- 3 Comparison of PLA vs ABS vs PETg
- 4 Comparison of 3d print filament materials
- 5 wanhao d7
- 6 Phrozen Sonic Mini 4k
- 7 Anycubic Wash & Cure 2.0
- 8 Ultimaker 2
- 9 Ender 3
- 10 CR-10
- 11 Printer
- 12 Hackspace PC
- 13 Resin Cure stuff
- 14 Fridge of filaments + other nick-nacks
- 15 Airbrush (somewhere)
Maintainer: Dan @Dan Robertson
Training Requirements
Whilst all use of Tools and Equipment is at your own risk each one will have a colour code denoting how much knowledge is required to operated it
- RED - You must be inducted by the maintainer / trainer and signed off as being competent
- ORANGE - You must read all the provided information and assess yourself as being competent of using the tool safely, if in doubt ask the area maintainer or other member for help
- GREEN - Fill your boots
Comparison of PLA vs ABS vs PETg
An article comparing ABS and PETg
https://all3dp.com/2/petg-vs-abs-3d-printing-filaments-compared/
An article comparing PETg and PLA
https://all3dp.com/2/petg-vs-pla-3d-printing-filaments-compared/
Comparison of 3d print filament materials
PLA
biodegradable, lower temperature, less toxic. specific brands vary considerably (~10%?)
ABS
more toxic, stronger? needs heated bed
Resin: white
brittle, not as strong, needs UV curing (in water) after print
wanhao d7
Technology: DLP (Digital Light Processing)
Build Volume: 120 x 68 x 180mm
Layer Resolution: 35 microns
Printable materials: 405 NM UV resin
Raspberry pi runs NanoDLP, which is the software which sends the 'plates' to the printer. Connect to NanoDLP from the hackspace computer, or on a computer on the same network
Purchased in November 2017 for £610.16 using money pledged by members £356 and Hackspace funds.
Phrozen Sonic Mini 4k
Technology: DLP (Digital Light Processing)
Build Volume: 134 x 75 x 130 mm
Layer Resolution: 35 microns
Printable materials: 405 NM UV resin
Files are prepared on Chitubox on the 3D room PC and transferred by USB stick.
The touch screen on the Phrozen controls printing from USB stick.
Purchased in Xxxxx for £XXX.XX using Hackspace funds.
Anycubic Wash & Cure 2.0
Wash and Cure station for use with DLP prints. Filled with Flash floor cleaner.
Ultimaker 2
Ender 3
CR-10
Printer
Hackspace PC
Resin Cure stuff
Fridge of filaments + other nick-nacks
Airbrush (somewhere)
"we have a spray booth and i have a fan and tube i can donate"
