Difference between revisions of "Wood Lathe"

From Norwich Hackspace
Jump to navigation Jump to search
Line 24: Line 24:
  
 
==Risk assessment==
 
==Risk assessment==
 +
OPERATIONAL SAFETY CHECKS
 +
Only one person may operate this machine at any one time.
 +
Before making adjustments, switch off and bring the machine to a complete standstill.
 +
Keep the tool rest adjusted close to the work and at the correct height.
 +
Adjust speed to suit the diameter of the work and turning operation.
 +
Stop the lathe and remove all tool rests before sanding.
  
 
==How to use==
 
==How to use==

Revision as of 11:30, 24 September 2020


Model: Apollo Wood pecker

Requires induction

Pre-use Checklist

PRE-OPERATIONAL SAFETY CHECKS Locate and ensure you are familiar with all machine operations and controls. Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty. Check workspaces and walkways to ensure no slip/trip hazards are present. Ensure the workpiece has been suitably prepared for the lathe operation. Workpiece must be securely fastened to face plate, chuck or between centres. Adjust speed to suit the diameter of the work and turning operation. Rotate the workpiece by hand to check clearance between tool rest and bed. Ensure the cutting tools are sharp and in good condition. As we do not have proper dust extraction you may wish to wear a dust mask – particularly when sanding.

Post-use Checklist

ENDING OPERATIONS AND CLEANING UP Switch off the machine when work completed. Return all chisels and other tools to racks. Leave the machine in a safe, clean and tidy state.

Risk assessment

OPERATIONAL SAFETY CHECKS Only one person may operate this machine at any one time. Before making adjustments, switch off and bring the machine to a complete standstill. Keep the tool rest adjusted close to the work and at the correct height. Adjust speed to suit the diameter of the work and turning operation. Stop the lathe and remove all tool rests before sanding.

How to use