File:EMCO M8 Nut Location.jpg

Original file ‎(2,048 × 1,536 pixels, file size: 657 KB, MIME type: image/jpeg)

The table tilt securing nut is located on the back of the bandsaw, as shown here

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	18:12, 5 May 2023		2,048 × 1,536 (657 KB)	Helen (talk \| contribs)

The following page links to this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone 11 Pro
Exposure time	1/50 sec (0.02)
F Number	f/1.8
ISO speed rating	500
Date and time of data generation	20:37, 3 May 2023
Lens focal length	4.25 mm
Latitude	52° 38′ 2.67″ N
Longitude	1° 17′ 35.48″ E
Altitude	5.78 metres above sea level
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	16.4.1
File change date and time	20:37, 3 May 2023
Y and C positioning	Centred
Exposure Programme	Normal programme
Exif version	2.32
Date and time of digitising	20:37, 3 May 2023
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	5.6439283242329
APEX aperture	1.6959938128384
APEX brightness	0.44849202733485
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	046
DateTimeDigitised subseconds	046
Supported Flashpix version	0,100
Colour space	Uncalibrated
Sensing method	One-chip colour area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	26 mm
Scene capture type	Standard
Speed unit	Kilometres per hour
Speed of GPS receiver	0.11333797744149
Reference for direction of image	True direction
Direction of image	154.77766428328
Reference for bearing of destination	True direction
Bearing of destination	154.77766428328