K40 laser cutter
Revision as of 09:24, 16 September 2020 by Toby Catlin (talk | contribs) (Created page with "== Status: KNACKERED == Plexer says: "The K40 is knackered I will be decommissioning it by removing the psu and Arduino etc... I fitted and scrapping it for parts either the...")
Status: KNACKERED
Plexer says: "The K40 is knackered I will be decommissioning it by removing the psu and Arduino etc... I fitted and scrapping it for parts either the tube or hv psu is knackered and it’s honestly not worth spending any more time on"
