Wood Lathe

RED equipment: Do not use without specific training.

Model: Apollo Wood pecker

Requires induction

Pre-use Checklist

PRE-OPERATIONAL SAFETY CHECKS

• Locate and ensure you are familiar with all machine operations and controls.
• Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty.
• Check workspaces and walkways to ensure no slip/trip hazards are present.
• Ensure the workpiece has been suitably prepared for the lathe operation.
• Workpiece must be securely fastened to face plate, chuck or between centres.
• Adjust speed to suit the diameter of the work and turning operation.
• Rotate the workpiece by hand to check clearance between tool rest and bed.
• Ensure the cutting tools are sharp and in good condition.
• As we do not have proper dust extraction you may wish to wear a dust mask – particularly when sanding.

Post-use Checklist

ENDING OPERATIONS AND CLEANING UP

• Switch off the machine when work completed.
• Return all chisels and other tools to racks.
• Leave the machine in a safe, clean and tidy state.

Risk assessment

OPERATIONAL SAFETY CHECKS

• Only one person may operate this machine at any one time.
• Before making adjustments, switch off and bring the machine to a complete standstill.
• Keep the tool rest adjusted close to the work and at the correct height.
• Adjust speed to suit the diameter of the work and turning operation.
• Stop the lathe and remove all tool rests before sanding.

POTENTIAL HAZARDS AND INJURIES

• Eye injuries from flying debris or defective timber.
• Hair/clothing getting caught in moving machine parts.
• Airborne dust.

DON’T Do not use faulty equipment. Immediately report suspect equipment to Brian Norman and put a sign on the lathe saying FAULTY DO NOT USE Never leave the machine running unattended

How to use