Harrison M250 lathe

From Norwich Hackspace
Revision as of 10:09, 24 June 2021 by Toby Catlin (talk | contribs)
Jump to navigation Jump to search

RED equipment: Do not use without specific training.



harrison lathe
  • Harrison M250 lathe

Induction Required

See Alan Scrase


Ownership

Owned by the Hackspace


PPE

The lathe is fairly safe until it isn't. It has extreme power and does not care about you.

Clothing

  1. Long hair tied back and covered (see lathe scalping on youtube)
  2. No loose clothing (see lathe strangulation)
  3. No gloves (see lathe skin degloving)
  4. No Jewellery – necklaces, rings, bracelets
  5. Safety glasses - One metal chip will mess up your eye
  6. Consider Ear defenders
  7. Stout footwear

Link to manual https://www.dropbox.com/s/sqoq5urmsyl0gsx/Harrison_m250.pdf?dl=0

= Tool holder

  • Whats the model?

I think: T1 quick change

  • Max tool height? 22mm

Tail stock

  • takes morse taper 3 (MT3)

= Tooling Available

  • Various cutting tools - both HSS and Carbide tipped
  • Parting off tool
  • Jacobs chuck
  • Dead centres

= Tooling wishlist

  • Knurling tool - There should be one I will confirm - Alan 15/10/20
Retrieved from ‘http://wiki.norwichhackspace.org/index.php?title=Harrison_M250_lathe&oldid=1150’