K40 laser cutter

From Norwich Hackspace
Revision as of 09:54, 16 September 2020 by Nicholas w (talk | contribs) (→‎Status: KNACKERED)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Status: KNACKERED

Plexer says: "The K40 is knackered I will be decommissioning it by removing the psu and Arduino etc... I fitted and scrapping it for parts either the tube or hv psu is knackered and it’s honestly not worth spending any more time on"

k40