Difference between revisions of "Wood Lathe"
Jump to navigation
Jump to search
Barny Relph (talk | contribs) |
|||
| Line 7: | Line 7: | ||
==Pre-use Checklist == | ==Pre-use Checklist == | ||
PRE-OPERATIONAL SAFETY CHECKS | PRE-OPERATIONAL SAFETY CHECKS | ||
| − | Locate and ensure you are familiar with all machine operations and controls. | + | * Locate and ensure you are familiar with all machine operations and controls. |
| − | Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty. | + | * Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty. |
| − | Check workspaces and walkways to ensure no slip/trip hazards are present. | + | * Check workspaces and walkways to ensure no slip/trip hazards are present. |
| − | Ensure the workpiece has been suitably prepared for the lathe operation. | + | * Ensure the workpiece has been suitably prepared for the lathe operation. |
| − | Workpiece must be securely fastened to face plate, chuck or between centres. | + | * Workpiece must be securely fastened to face plate, chuck or between centres. |
| − | Adjust speed to suit the diameter of the work and turning operation. | + | * Adjust speed to suit the diameter of the work and turning operation. |
| − | Rotate the workpiece by hand to check clearance between tool rest and bed. | + | * Rotate the workpiece by hand to check clearance between tool rest and bed. |
| − | Ensure the cutting tools are sharp and in good condition. | + | * Ensure the cutting tools are sharp and in good condition. |
| − | As we do not have proper dust extraction you may wish to wear a dust mask – particularly when sanding. | + | * As we do not have proper dust extraction you may wish to wear a dust mask – particularly when sanding. |
==Post-use Checklist == | ==Post-use Checklist == | ||
ENDING OPERATIONS AND CLEANING UP | ENDING OPERATIONS AND CLEANING UP | ||
| − | Switch off the machine when work completed. | + | * Switch off the machine when work completed. |
| − | Return all chisels and other tools to racks. | + | * Return all chisels and other tools to racks. |
| − | Leave the machine in a safe, clean and tidy state. | + | * Leave the machine in a safe, clean and tidy state. |
==Risk assessment== | ==Risk assessment== | ||
OPERATIONAL SAFETY CHECKS | OPERATIONAL SAFETY CHECKS | ||
| − | Only one person may operate this machine at any one time. | + | * Only one person may operate this machine at any one time. |
| − | Before making adjustments, switch off and bring the machine to a complete standstill. | + | * Before making adjustments, switch off and bring the machine to a complete standstill. |
| − | Keep the tool rest adjusted close to the work and at the correct height. | + | * Keep the tool rest adjusted close to the work and at the correct height. |
| − | Adjust speed to suit the diameter of the work and turning operation. | + | * Adjust speed to suit the diameter of the work and turning operation. |
| − | Stop the lathe and remove all tool rests before sanding. | + | * Stop the lathe and remove all tool rests before sanding. |
POTENTIAL HAZARDS AND INJURIES | POTENTIAL HAZARDS AND INJURIES | ||
| − | Eye injuries from flying debris or defective timber. | + | * Eye injuries from flying debris or defective timber. |
| − | Hair/clothing getting caught in moving machine parts. | + | * Hair/clothing getting caught in moving machine parts. |
| − | Airborne dust. | + | * Airborne dust. |
DON’T | DON’T | ||
Revision as of 10:38, 24 September 2020
Model: Apollo Wood pecker
Requires induction
Pre-use Checklist
PRE-OPERATIONAL SAFETY CHECKS
- Locate and ensure you are familiar with all machine operations and controls.
- Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty.
- Check workspaces and walkways to ensure no slip/trip hazards are present.
- Ensure the workpiece has been suitably prepared for the lathe operation.
- Workpiece must be securely fastened to face plate, chuck or between centres.
- Adjust speed to suit the diameter of the work and turning operation.
- Rotate the workpiece by hand to check clearance between tool rest and bed.
- Ensure the cutting tools are sharp and in good condition.
- As we do not have proper dust extraction you may wish to wear a dust mask – particularly when sanding.
Post-use Checklist
ENDING OPERATIONS AND CLEANING UP
- Switch off the machine when work completed.
- Return all chisels and other tools to racks.
- Leave the machine in a safe, clean and tidy state.
Risk assessment
OPERATIONAL SAFETY CHECKS
- Only one person may operate this machine at any one time.
- Before making adjustments, switch off and bring the machine to a complete standstill.
- Keep the tool rest adjusted close to the work and at the correct height.
- Adjust speed to suit the diameter of the work and turning operation.
- Stop the lathe and remove all tool rests before sanding.
POTENTIAL HAZARDS AND INJURIES
- Eye injuries from flying debris or defective timber.
- Hair/clothing getting caught in moving machine parts.
- Airborne dust.
DON’T Do not use faulty equipment. Immediately report suspect equipment to Brian Norman and put a sign on the lathe saying FAULTY DO NOT USE Never leave the machine running unattended
