Difference between revisions of "TCT Chop saw"
Jump to navigation
Jump to search
Toby Catlin (talk | contribs) (Created page with "sdsad") |
Toby Catlin (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | + | == Safety == | |
| + | * Ear defenders | ||
| + | * eye protection | ||
| + | |||
| + | Its loud and throws hot bits of metal around. | ||
| + | |||
| + | == Instructions == | ||
| + | Cuts steel and aluminium. | ||
| + | Ensure piece is firmly clamped and long enough so that it cannot be twisted out of the vice. | ||
| + | Vice can be turned to an angle but is not very accurate. | ||
| + | Go slow and use some cutting fluid or WD40 to help the cutting. | ||
| + | |||
| + | == Pre-job == | ||
| + | Inspect blade for missing or cracked teeth | ||
| + | Consider where the chips will be thrown. | ||
| + | |||
| + | == Post-check == | ||
| + | Clean up any chips | ||
| + | Inspect blade for missing or cracked teeth | ||
| + | |||
| + | == Ownership == | ||
| + | Hackspace | ||
| + | Donated from South London Hackspace | ||
Revision as of 20:25, 19 September 2020
Safety
- Ear defenders
- eye protection
Its loud and throws hot bits of metal around.
Instructions
Cuts steel and aluminium. Ensure piece is firmly clamped and long enough so that it cannot be twisted out of the vice. Vice can be turned to an angle but is not very accurate. Go slow and use some cutting fluid or WD40 to help the cutting.
Pre-job
Inspect blade for missing or cracked teeth Consider where the chips will be thrown.
Post-check
Clean up any chips Inspect blade for missing or cracked teeth
Ownership
Hackspace Donated from South London Hackspace
