View source for K40 laser cutter

← K40 laser cutter

Jump to navigation Jump to search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

== Status: KNACKERED ==

Plexer says: "The K40 is knackered I will be decommissioning it by removing the psu and Arduino etc... I fitted and scrapping it for parts either the tube or hv psu is knackered and it’s honestly not worth spending any more time on"

Return to K40 laser cutter.

Retrieved from ‘http://wiki.norwichhackspace.org/index.php?title=K40_laser_cutter’