View source for Russian A0 laser cutter

<div id="mw-content-text" lang="en" dir="ltr" class="mw-content-ltr"><div style="font-weight: bold; text-align: center; width: 60% margin-left: auto; margin-right: auto; font-size: 1.3em; border: 2px solid red;">
<p><span style="color:red">'''RED'''</span> equipment: Do not use without specific training. 
<br/></div>
<br>

==Read Me==

This is a new (secondhand) piece of kit it's not currently available for use until it's refurbished

==Training==

You must not use the laser cutter without being trained. The laser cutter is unlikely to hurt you, but you can easily hurt '''it''' without training. For more information about laser cutter training ask on Slack in the lasercutter channel

==Costs==

* Training - Free
* Usage - £5/hour, £1/10minutes
* Consumables - Bring your own and/or use what is in the off cuts bin or purchase from the HS stock via iZettle, but always ensure (rather than assume) it's [[Laser_Cutter/Instructions#Chlorine_Testing_and_Material_Safety|laser safe]].

==How to==
* [[Lasercut Illuminated Acrylic sign]]

==Tech specs==
{| class="wikitable"
|-
! Spec !! Value
|-
| Laser power: || 150W Co2 laser tube
|-
| Maximum cutting area: || 1200 x 900mm
|-
| Body dimensions:|| 1800 x 1300 x 900mm
|-
| Repeatability:|| ± 0.05mm
|-
| Power source:|| AC 110 – 220V ± 10%, 50 – 60Hz
|-
| Total power:|| <1,000 W
|-
| Operating temperature:|| 0 – 45 °C
|-
| Humidity:|| 5 – 95%
|-
| Minimum character size:|| 2mm Chinese character alphanumeric 1mm
|-
| Corresponding data format:|| BMP, PLT, DST, DXF, and AI
|-
| Operating system:|| stepper motor
|-
| Cooling system:|| water-cooled
|-
| Control system:|| Leetro Controller
|-
| Weight:|| 170kg
|-
| Kerf:|| 0.1mm
|-
|}

== Laser Cutter instructions == 

[[Laser Cutter/Instructions|Laser Cutter Instructions]]

==Rules==
;'''1) Never leave the laser cutter running unattended*'''
:You should always be next to the Laser Cutter and paying attention to it while the laser is active, ''I cannot state how important it is to monitor the laser cutter whilst it is in use, it knows when you're not watching and will burst into flames the second you turn your back.'' If you have to leave the laser cutter unattended, use the pause button. '''In case of fire''': use the fire blanket first if that doesn't work use the CO<sub>2</sub> extinguisher by the laser cutter and/or raise the fire alarm.

;'''2) If the Laser Cutter breaks or behaves abnormally, put it Out of Order and post on Slack'''
:If the laser cutter starts behaving weirdly, doesn't cut correctly with the correct settings, makes <strike>interesting</strike> worrying noises, any of the ancillary machines (cooler/extractor/air assist) are not working properly or if there has been a fire, place it out of order and post to Slack detailing what went wrong. If you don't use slack, get someone else to post for you.

;'''3) Do not use if you haven't had training'''
A trained member can do a job for another person as long as the trained member is the one using the laser cutter.

;'''4) You must be a member of Norwich Hackspace to use the laser cutter'''
:The Laser Cutter is a machine owned and operated by Norwich Hackspace, therefore you must be a member to use it. If you were a trained member and your membership payments have lapsed, access will automatically be revoked until you become a member again. Having a trained member cut a job for a non-member is perfectly fine.

;'''5) Always pay for your usage'''
:The Laser Cutter costs £5/hour to use. You only have to pay for the time that the laser is active for, not any setup or preparation time. All money goes towards maintenance and buying consumables like mirrors, lenses and new laser tubes. If there is not enough money to cover the cost of consumables when something needs replacing due to people using the Laser Cutter without paying, they simply won't be bought, rendering the Laser Cutter out of order until we find another way of raising money to cover the costs.

;'''6) Only cut approved materials of an acceptable thickness, never cut materials on the banned list or materials that are too thick.*'''
:If you would like to cut a material that is not on the Approved List, contact one of the maintainers, we will do some research and testing (or instruct you to do the testing) to see if the materials is safe to laser cut, if it is, it will be added to the Approved List. Acceptable thicknesses are shown on the cutting parameters page.

;'''7) Log all jobs correctly in the logbook - not currently used'''
:Currently, the logbook is the only way the maintainers can view the status of the cutter and how it's performing on a day-to-day basis. It is vital that you complete this for each job done with any power settings used; you can add multiple jobs together into a single log if they used the same settings, material and were all successful. A link to the logbook is on the desktop, on the bookmarks bar or [ here].

;'''8) Do not disable any of the ancillary components such as the air assist, extractor or cooler'''
:These all have their purpose in protecting the Laser Cutter and making it work correctly, please do not disable any of these for any reason whatsoever.

;'''9) Don't place cutting waste in the scrap bins'''
: The scrap bins are only for usable bits of material you don't want any more. '''A usable bit of material is anything 10cm<sup>2</sup> or larger without any cuts or engraving on it'''. Please snap any unusable bits off to make it as small as possible. Cutting waste is fully recyclable and can be placed in any bin in the hackspace, PLEASE DO NOT PUT IT IN THE SCRAPS BIN!

'''Violation of these rules will result in either a verbal warning, a written warning, being made to redo the training, a temporary ban or in the most extreme cases a permanent ban issues by the maintainers. We will try and be as fair as possible and we really don't want to punish people and prevent them from using the machine, we'd much rather educate about the correct way to use it. However, this is not an excuse for rules ignorance.'''

'''*Violation of rules 1 or 3 (or excessive violation of rule 6) will result in an immediate ban without warning.'''

<u>'''All bans will be made public and be able to be appealed against.'''</u>

==Software==
* [https://lightburnsoftware.com/ Lightburn] - The greatest lasercutter software ever
* [https://xoihazard.com/tools/halftone/ Halftone vector generator] - Takes a picture and converts it into a representation of the image using ploygons. Its a cool way to get around the lack of greyscale functionality

==Where to get supplies/consumables/materials==
* [http://www.hamaracrylic.co.uk/hamar_acrylic_products.aspx Hamar] - 16A Bidder Street London, E16 4ST. 8am-5pm Mon-Fri
* [https://hobarts.com/sheet-materials_124/ Hobarts] - mail order
* [http://kitronic.co.uk Kitronic] - mail order, good ply
* [http://www.blueprintmodel.co.uk/ Bluprint models] Arch 258, Paradise Row, Bethnal Green, London. E2 9LE - On Cambridge Heath Road - & mail order - good for MDF, their perspex is shit
* [http://www.mdfcuttosize.com/ MDF Cut to Size] - 413 Wick Lane, Bow, London, E3 2JG - Pay for the size you want cut
* [http://www.thenaturalworkshop.co.uk/ The Natural Workshop (Website)] - [http://stores.ebay.co.uk/thenaturalworkshop/ The Natural Workshop (eBay)]- mail order
* [https://www.jennortimber.co.uk/products/plywood Jennor Timber], Lockfield Avenue, Enfield EN3 7QL, or 13 Braintree Rd, Ruislip HA4 0EJ. Laser grade birch ply. Not listed on their website, but they do it - it's in their catalogue, and they know their stuff. Give them a call.

==List of allowed and banned materials ==
===Allowed===
====Woods====
* Laser-grade plywood
** Birch ply (max 9mm)
** Poplar ply (max 9mm)
* Balsa wood
* Paper (cutting only)
* Card/Cardboard (cutting only) [[tips on lasercutting card]]
* MDF - small amounts of MDF or engraving on MDF products is ok'ish

====Plastics====
* Thin Polypropylene sheet (<1mm) 
* Acrylic (max 10mm)
* [[tips on lasercutting foam | Foamcore]] (non-PVC variety)
* Correx (Genuine non PVC)
* Depron foam (Fire risk, must be closely monitored)
* EVA Foam (if real)
* Delrin (max 8mm)

====Textiles====
* Cloth/felt/hemp/cotton (Not plastic-impregnated fabric)
* Polar Fleece

====For engraving only====
* Stone (Engrave only)
* Ceramic tile (Engrave only)
* Non-resinous wood IE hardwood (Engrave only)
* Glass (Engrave only)
* Anodised Aluminium (Engrave only)

===Explicitly banned===

You should only be cutting materials on the Allowed list.

If you want to cut a material which is not on this list, contact one of the maintainers and get them to OK it first.

* Food (laser contamination, fire risk, emissions)
* Body parts
* Plastics containing PVC (laser contamination, emissions)
* Plastics containing ABS (laser contamination, fire risk, cyanide emission)
* Fibreglass (laser contamination, fire risk, emissions)
* Circuit boards (laser contamination, fire risk, emissions)
* Polycarbonate (laser contamination, fire risk)
* All metal (except engraving anodized aluminium)
* Polystyrene (laser contamination, fire risk, emissions)
* Polypropylene (laser contamination, fire risk, emissions)
* HDPE (high-density polyethylene or polyethylene) (laser contamination, fire risk, emissions)
* Carbon fibre (laser contamination, fire risk, emissions)
* Shuttering ply (laser contamination, fire risk, emissions)
* Latex (laser contamination, fire risk, emissions)

== Cutting Parameters ==
'''For list of material settings, see [[A2_Greyfin_Laser_Cutter_Materials_Information|Cutting Parameters]].

== Trainers and maintainers ==

If you have questions or problems with the laser cutter, please speak to one of these people:

* Ben - Plexer


==Technical Specs==
* Glass laser tube (150W rated power) - recommended max tube current 22mA
* "Uknnown" laser power supply
* Leetro motion controller
* LaserCut? software.
* water cooler

==Tips&Tricks==
* Print&Cut - [https://www.youtube.com/watch?v=pOl75orZw3I Saving a job that didn't cut all the way through]

[[Category:Tools for use on wood]]
[[Category:Tools for use on plastic]]