View source for Locking-Up Process

=== When leaving the Hackspace, follow these steps to ensure it is left safe and secure ===
* Ensure the 2 fire exits (1 off main room, 1 off woodshop) are locked and clear of obstructions
* Ensure bank of 4 plug switches next to laser-cutter computer are off
* Turn off laser cutter computer if it has been left on
* Close all windows
* Lower blinds in main room
* Turn off all remaining lights
* To leave: press and hold main-entrance lock button (on rear of door) until it starts beeping, step out, allow it to close, and test it has locked properly by pushing firmly on the door

=== Optional, but helpful during rounds ===
* Toilet-paper/paper-towels stock level in Office low? Mention in #general slack
* Ensure site address (useful for emergencies) is present and visible on whiteboard