http://wiki.norwichhackspace.org/api.php?action=feedcontributions&feedformat=atom&user=Tim+ParnellNorwich Hackspace - User contributions [en-gb]2026-04-29T11:37:15ZUser contributionsMediaWiki 1.33.1http://wiki.norwichhackspace.org/index.php?title=29/25&diff=200729/252025-06-20T14:44:41Z<p>Tim Parnell: /* Title */</p>
<hr />
<div>== Title ==<br />
Metal Space upgrade<br><br />
<br />
<br />
== Proposer ==<br />
<br />
Ellis and Alan<br><br />
<br />
== Date proposed ==<br />
<br />
29/3/25<br><br />
<br />
== Date for Decision ==<br />
<br />
7/4/25<br><br />
<br />
== Cost ==<br />
<br />
£500 to ?<br />
<br />
== What is being asked for ==<br />
<br><br />
Revamp the metal space: tidy up, remove rubbish. Maybe re-paint floor, look at benching, <br><br />
Decide minimum tools required for space<br><br />
Tool storage (shadow boards, tool boxes)<br><br />
review PPE and general upkeep (dustpans, bins, brooms etc)<br><br />
Signage<br><br />
anything else<br><br />
<br />
<br />
== Why/how this will be good to have ==<br />
<br />
To make the Metal space a nicer, safer environment with a cleaner looking and well laid out workshop. <br><br />
This will make the place more inviting and better working place for all our members.<br><br />
<br />
== Who is supporting the project ==<br />
<br />
TimP, KristiaN, Ellis, Stef, Helen, Paula, Uggy, Issy.<br />
<br />
== Comments ==<br />
Link to last improvement plan.<br><br />
https://wiki.norwichhackspace.org/index.php?title=Metal_workshop_improvements_mk1<br />
<br />
== Outcome ==<br />
<br />
<br />
go to [[Proposals_and_decision_making_-_open |proposals]]<br></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=29/25&diff=200629/252025-06-20T14:43:57Z<p>Tim Parnell: /* What is being asked for */</p>
<hr />
<div>== Title ==<br />
Metal Space upgrade<br><br />
<br />
<br />
== Proposer ==<br><br />
<br />
Ellis and Alan<br><br />
<br />
== Date proposed ==<br><br />
29/3/25<br><br />
<br />
== Date for Decision ==<br><br />
7/4/25<br><br />
<br />
== Cost ==<br><br />
£500 to ?<br />
<br />
== What is being asked for ==<br />
<br><br />
Revamp the metal space: tidy up, remove rubbish. Maybe re-paint floor, look at benching, <br><br />
Decide minimum tools required for space<br><br />
Tool storage (shadow boards, tool boxes)<br><br />
review PPE and general upkeep (dustpans, bins, brooms etc)<br><br />
Signage<br><br />
anything else<br><br />
<br />
<br />
== Why/how this will be good to have ==<br />
<br />
To make the Metal space a nicer, safer environment with a cleaner looking and well laid out workshop. <br><br />
This will make the place more inviting and better working place for all our members.<br><br />
<br />
== Who is supporting the project ==<br />
<br />
TimP, KristiaN, Ellis, Stef, Helen, Paula, Uggy, Issy.<br />
<br />
== Comments ==<br />
Link to last improvement plan.<br><br />
https://wiki.norwichhackspace.org/index.php?title=Metal_workshop_improvements_mk1<br />
<br />
== Outcome ==<br />
<br />
<br />
go to [[Proposals_and_decision_making_-_open |proposals]]<br></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Talk:29/25&diff=2005Talk:29/252025-06-20T14:40:25Z<p>Tim Parnell: /* Metalspace Improvements */</p>
<hr />
<div>== Metalspace Improvements ==<br />
Meeting 19th June 2025 with '''Alan, Ellis, Kristian, Nicholas''' - about making the Metalspace more Ship-Shape.<br><br />
It's generally accepted to be 'in need of improvement' - make it more useable, better organised, have better control, and only usable by a tiny niche. 'not working for the HS'. <br><br />
<br />
Wiki proposal to implement the improvements<br><br />
<br />
'''A-list'''<br> <br />
<br />
Lighting<br><br />
<br />
CCTV<br><br />
<br />
Clearout<br><br />
<br />
Safety<br><br />
<br />
Lock Cabinet<br><br />
<br />
'''B-list'''<br> <br />
<br />
Ventilation<br><br />
<br />
Water<br><br />
<br />
Less Grey Zone<br><br />
<br />
Other notes<br><br />
<br />
'''Users'''<br><br />
<br />
'''1 - Big Users'''<br />
* Kristian<br />
* Ellis<br />
* Ned<br />
* Jordan<br />
* Toby<br />
* (Nicholas)<br />
'''2 - Rare Users'''<br />
* Andy<br />
* Barny<br />
* (Plexer?)<br><br />
<br />
'''Lighting'''<br><br />
<br />
Everybody's big #1<br><br />
Getting the central bulb in, is easiest and first, and we have access to mark's big ladder<br><br />
Lighting above the lathe, ellis will make a bracket for - extend 1m+ out, and be drilled into the wall<br><br />
Maybe other lighting ideas. Kristian will look at wiring options. (avoid sockets or get more?)<br><br />
<br />
'''CCTV'''<br><br />
<br />
Is "other people" a problem? and how much? CCTV is switched off and maybe moved.<br><br />
Wire CCTV in a way that makes it harder to disable. Kristian will look at/do.<br><br />
<br />
'''Lockable cabinet'''<br><br />
For tools we care about - yes. Alan will look to get a large metal cupboard thing.<br><br />
<br />
'''Clearout'''<br><br />
<br />
There is tons of shite, so Alan will come with trailer. Ellis keen to help. Toby will be required to identify stuff.<br><br />
<br />
The cement mixer bowl "as bin" should go.<br><br />
New bin required<br><br />
<br />
'''Safety'''<br><br />
<br />
Ellis will look through to see what PPE we have<br><br />
Nicholas and Kristian think a communal respirator is a good idea. Alan is not so sure. Ellis would like £1500 welding/respirator thing.<br><br />
<br />
PPE box / cupboard / shelf with names on whos it is<br><br />
<br />
Also, we need (to consider) broom / dustpan / vacuum (Ellis keen) - Henry Hoover will do. (pen paper), latex gloves, bin, wipes, blue-roll,<br><br />
<br />
'''Lock Cabinet'''<br><br />
<br />
Seems required and people are keen. Alan talks of large metal cabinet. Kristian mentioned doorbot technology.<br><br />
<br />
== B-issues for later== <br />
<br />
'''Ventilation'''<br><br />
<br />
Fumes from the welder is the main issue, but general extraction is good.<br />
But, in the longer term, setting on the sandblaster where the hammers are (Ellis will clear that area - possibly creating a hammer board)<br><br />
<br />
Then using good extraction (not just throwing sand out of the window), with general space extraction. Possibly fume-hood for the welder (?)<br><br />
<br />
'''Water'''<br><br />
<br />
Currently, Ellis wheels water to the HS with a crap funnel. This could be better. Kristian suggested taking rainwater at the same time as making the ventilation.<br><br />
<br />
Less Grey Zone<br><br />
<br />
Toby / HS tools are unclear<br><br />
<br />
'''Other'''<br><br />
<br />
The milling machine is not-great, and position might change<br><br />
The hammers desk, Ellis will look to sort out a bit, as it might be where the sandblaster goes<br><br />
The area opposite the lathe is not being used well. The desk is obscuring the shelves, and is not used for much.</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Talk:29/25&diff=2004Talk:29/252025-06-20T14:39:15Z<p>Tim Parnell: /* Metalspace Improvements */</p>
<hr />
<div>== Metalspace Improvements ==<br />
Meeting 19th June 2025 with '''Alan, Ellis, Kristian, Nicholas''' - about making the Metalspace more Ship-Shape.<br><br />
It's generally accepted to be 'in need of improvement' - make it more useable, better organised, have better control, and only usable by a tiny niche. 'not working for the HS'. <br><br />
<br />
Wiki proposal to implement the improvements<br><br />
<br />
'''A-list'''<br> <br />
<br />
Lighting<br><br />
<br />
CCTV<br><br />
<br />
Clearout<br><br />
<br />
Safety<br><br />
<br />
Lock Cabinet<br><br />
<br />
'''B-list'''2025 <br />
<br />
Ventilation<br><br />
<br />
Water<br><br />
<br />
Less Grey Zone<br><br />
<br />
Other notes<br><br />
<br />
'''Users'''<br><br />
<br />
'''1 - Big Users'''<br />
* Kristian<br />
* Ellis<br />
* Ned<br />
* Jordan<br />
* Toby<br />
* (Nicholas)<br />
'''2 - Rare Users'''<br />
* Andy<br />
* Barny<br />
* (Plexer?)<br><br />
<br />
'''Lighting'''<br><br />
<br />
Everybody's big #1<br><br />
Getting the central bulb in, is easiest and first, and we have access to mark's big ladder<br><br />
Lighting above the lathe, ellis will make a bracket for - extend 1m+ out, and be drilled into the wall<br><br />
Maybe other lighting ideas. Kristian will look at wiring options. (avoid sockets or get more?)<br><br />
<br />
'''CCTV'''<br><br />
<br />
Is "other people" a problem? and how much? CCTV is switched off and maybe moved.<br><br />
Wire CCTV in a way that makes it harder to disable. Kristian will look at/do.<br><br />
<br />
'''Lockable cabinet'''<br><br />
For tools we care about - yes. Alan will look to get a large metal cupboard thing.<br><br />
<br />
'''Clearout'''<br><br />
<br />
There is tons of shite, so Alan will come with trailer. Ellis keen to help. Toby will be required to identify stuff.<br><br />
<br />
The cement mixer bowl "as bin" should go.<br><br />
New bin required<br><br />
<br />
'''Safety'''<br><br />
<br />
Ellis will look through to see what PPE we have<br><br />
Nicholas and Kristian think a communal respirator is a good idea. Alan is not so sure. Ellis would like £1500 welding/respirator thing.<br><br />
<br />
PPE box / cupboard / shelf with names on whos it is<br><br />
<br />
Also, we need (to consider) broom / dustpan / vacuum (Ellis keen) - Henry Hoover will do. (pen paper), latex gloves, bin, wipes, blue-roll,<br><br />
<br />
'''Lock Cabinet'''<br><br />
<br />
Seems required and people are keen. Alan talks of large metal cabinet. Kristian mentioned doorbot technology.<br><br />
<br />
== B-issues for later==<br> <br />
<br />
'''Ventilation'''<br><br />
<br />
Fumes from the welder is the main issue, but general extraction is good.<br />
But, in the longer term, setting on the sandblaster where the hammers are (Ellis will clear that area - possibly creating a hammer board)<br><br />
<br />
Then using good extraction (not just throwing sand out of the window), with general space extraction. Possibly fume-hood for the welder (?)<br><br />
<br />
'''Water'''<br><br />
<br />
Currently, Ellis wheels water to the HS with a crap funnel. This could be better. Kristian suggested taking rainwater at the same time as making the ventilation.<br><br />
<br />
Less Grey Zone<br><br />
<br />
Toby / HS tools are unclear<br><br />
<br />
'''Other'''<br><br />
<br />
The milling machine is not-great, and position might change<br><br />
The hammers desk, Ellis will look to sort out a bit, as it might be where the sandblaster goes<br><br />
The area opposite the lathe is not being used well. The desk is obscuring the shelves, and is not used for much.</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Talk:29/25&diff=2003Talk:29/252025-06-20T14:38:31Z<p>Tim Parnell: /* Metalspace Improvements */</p>
<hr />
<div>== Metalspace Improvements ==<br />
Meeting 19th June 2025 with '''Alan, Ellis, Kristian, Nicholas''' - about making the Metalspace more Ship-Shape.<br><br />
It's generally accepted to be 'in need of improvement' - make it more useable, better organised, have better control, and only usable by a tiny niche. 'not working for the HS'. <br><br />
<br />
Wiki proposal to implement the improvements<br><br />
<br />
'''A-list'''<br> <br />
<br />
Lighting<br><br />
<br />
CCTV<br><br />
<br />
Clearout<br><br />
<br />
Safety<br><br />
<br />
Lock Cabinet<br><br />
<br />
'''B-list'''<br />
Ventilation<br><br />
<br />
Water<br><br />
<br />
Less Grey Zone<br><br />
<br />
Other notes<br><br />
<br />
'''Users'''<br><br />
<br />
Big Users<br />
* Kristian<br />
* Ellis<br />
* Ned<br />
* Jordan<br />
* Toby<br />
* (Nicholas)<br />
'''* Rare Users'''<br />
* Andy<br />
* Barny<br />
* (Plexer?)<br><br />
<br />
'''Lighting'''<br><br />
<br />
Everybody's big #1<br><br />
Getting the central bulb in, is easiest and first, and we have access to mark's big ladder<br><br />
Lighting above the lathe, ellis will make a bracket for - extend 1m+ out, and be drilled into the wall<br><br />
Maybe other lighting ideas. Kristian will look at wiring options. (avoid sockets or get more?)<br><br />
<br />
'''CCTV'''<br><br />
<br />
Is "other people" a problem? and how much? CCTV is switched off and maybe moved.<br><br />
Wire CCTV in a way that makes it harder to disable. Kristian will look at/do.<br><br />
<br />
'''Lockable cabinet'''<br><br />
For tools we care about - yes. Alan will look to get a large metal cupboard thing.<br><br />
<br />
'''Clearout'''<br><br />
<br />
There is tons of shite, so Alan will come with trailer. Ellis keen to help. Toby will be required to identify stuff.<br><br />
<br />
The cement mixer bowl "as bin" should go.<br><br />
New bin required<br><br />
<br />
'''Safety'''<br><br />
<br />
Ellis will look through to see what PPE we have<br><br />
Nicholas and Kristian think a communal respirator is a good idea. Alan is not so sure. Ellis would like £1500 welding/respirator thing.<br><br />
<br />
PPE box / cupboard / shelf with names on whos it is<br><br />
<br />
Also, we need (to consider) broom / dustpan / vacuum (Ellis keen) - Henry Hoover will do. (pen paper), latex gloves, bin, wipes, blue-roll,<br><br />
<br />
'''Lock Cabinet'''<br><br />
<br />
Seems required and people are keen. Alan talks of large metal cabinet. Kristian mentioned doorbot technology.<br><br />
<br />
== B-issues for later==<br> <br />
<br />
'''Ventilation'''<br><br />
<br />
Fumes from the welder is the main issue, but general extraction is good.<br />
But, in the longer term, setting on the sandblaster where the hammers are (Ellis will clear that area - possibly creating a hammer board)<br><br />
<br />
Then using good extraction (not just throwing sand out of the window), with general space extraction. Possibly fume-hood for the welder (?)<br><br />
<br />
'''Water'''<br><br />
<br />
Currently, Ellis wheels water to the HS with a crap funnel. This could be better. Kristian suggested taking rainwater at the same time as making the ventilation.<br><br />
<br />
Less Grey Zone<br><br />
<br />
Toby / HS tools are unclear<br><br />
<br />
'''Other'''<br><br />
<br />
The milling machine is not-great, and position might change<br><br />
The hammers desk, Ellis will look to sort out a bit, as it might be where the sandblaster goes<br><br />
The area opposite the lathe is not being used well. The desk is obscuring the shelves, and is not used for much.</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Talk:29/25&diff=2002Talk:29/252025-06-20T14:37:39Z<p>Tim Parnell: /* Metalspace Improvements */</p>
<hr />
<div>== Metalspace Improvements ==<br />
Meeting 2025 19th June with Alan, Ellis, Kristian, Nicholas - about making the Metalspace more Ship-Shape.<br><br />
It's generally accepted to be 'in need of improvement' - make it more useable, better organised, have better control, and only usable by a tiny niche. 'not working for the HS'. <br><br />
<br />
Wiki proposal to implement the improvements<br><br />
<br />
'''A-list'''<br> <br />
<br />
<br />
Lighting<br><br />
<br />
CCTV<br><br />
<br />
Clearout<br><br />
<br />
Safety<br><br />
<br />
Lock Cabinet<br><br />
<br />
'''B-list'''<br />
Ventilation<br><br />
<br />
Water<br><br />
<br />
Less Grey Zone<br><br />
<br />
Other notes<br><br />
<br />
'''Users'''<br><br />
<br />
Big Users<br />
* Kristian<br />
* Ellis<br />
* Ned<br />
* Jordan<br />
* Toby<br />
* (Nicholas)<br />
'''* Rare Users'''<br />
* Andy<br />
* Barny<br />
* (Plexer?)<br><br />
<br />
'''Lighting'''<br><br />
<br />
Everybody's big #1<br><br />
Getting the central bulb in, is easiest and first, and we have access to mark's big ladder<br><br />
Lighting above the lathe, ellis will make a bracket for - extend 1m+ out, and be drilled into the wall<br><br />
Maybe other lighting ideas. Kristian will look at wiring options. (avoid sockets or get more?)<br><br />
<br />
'''CCTV'''<br><br />
<br />
Is "other people" a problem? and how much? CCTV is switched off and maybe moved.<br><br />
Wire CCTV in a way that makes it harder to disable. Kristian will look at/do.<br><br />
<br />
'''Lockable cabinet'''<br><br />
For tools we care about - yes. Alan will look to get a large metal cupboard thing.<br><br />
<br />
'''Clearout'''<br><br />
<br />
There is tons of shite, so Alan will come with trailer. Ellis keen to help. Toby will be required to identify stuff.<br><br />
<br />
The cement mixer bowl "as bin" should go.<br><br />
New bin required<br><br />
<br />
'''Safety'''<br><br />
<br />
Ellis will look through to see what PPE we have<br><br />
Nicholas and Kristian think a communal respirator is a good idea. Alan is not so sure. Ellis would like £1500 welding/respirator thing.<br><br />
<br />
PPE box / cupboard / shelf with names on whos it is<br><br />
<br />
Also, we need (to consider) broom / dustpan / vacuum (Ellis keen) - Henry Hoover will do. (pen paper), latex gloves, bin, wipes, blue-roll,<br><br />
<br />
'''Lock Cabinet'''<br><br />
<br />
Seems required and people are keen. Alan talks of large metal cabinet. Kristian mentioned doorbot technology.<br><br />
<br />
== B-issues for later==<br> <br />
<br />
'''Ventilation'''<br><br />
<br />
Fumes from the welder is the main issue, but general extraction is good.<br />
But, in the longer term, setting on the sandblaster where the hammers are (Ellis will clear that area - possibly creating a hammer board)<br><br />
<br />
Then using good extraction (not just throwing sand out of the window), with general space extraction. Possibly fume-hood for the welder (?)<br><br />
<br />
'''Water'''<br><br />
<br />
Currently, Ellis wheels water to the HS with a crap funnel. This could be better. Kristian suggested taking rainwater at the same time as making the ventilation.<br><br />
<br />
Less Grey Zone<br><br />
<br />
Toby / HS tools are unclear<br><br />
<br />
'''Other'''<br><br />
<br />
The milling machine is not-great, and position might change<br><br />
The hammers desk, Ellis will look to sort out a bit, as it might be where the sandblaster goes<br><br />
The area opposite the lathe is not being used well. The desk is obscuring the shelves, and is not used for much.</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Talk:29/25&diff=2001Talk:29/252025-06-20T14:37:22Z<p>Tim Parnell: /* B-issues for later */</p>
<hr />
<div>== Metalspace Improvements ==<br />
Meeting 2025 19th June with Alan, Ellis, Kristian, Nicholas - about making the Metalspace more Ship-Shape.<br><br />
It's generally accepted to be 'in need of improvement' - make it more useable, better organised, have better control, and only usable by a tiny niche. 'not working for the HS'. <br><br />
<br />
Wiki proposal to implement the improvements<br><br />
<br />
'''A-list'''<br />
Lighting<br><br />
<br />
CCTV<br><br />
<br />
Clearout<br><br />
<br />
Safety<br><br />
<br />
Lock Cabinet<br><br />
<br />
'''B-list'''<br />
Ventilation<br><br />
<br />
Water<br><br />
<br />
Less Grey Zone<br><br />
<br />
Other notes<br><br />
<br />
'''Users'''<br><br />
<br />
Big Users<br />
* Kristian<br />
* Ellis<br />
* Ned<br />
* Jordan<br />
* Toby<br />
* (Nicholas)<br />
'''* Rare Users'''<br />
* Andy<br />
* Barny<br />
* (Plexer?)<br><br />
<br />
'''Lighting'''<br><br />
<br />
Everybody's big #1<br><br />
Getting the central bulb in, is easiest and first, and we have access to mark's big ladder<br><br />
Lighting above the lathe, ellis will make a bracket for - extend 1m+ out, and be drilled into the wall<br><br />
Maybe other lighting ideas. Kristian will look at wiring options. (avoid sockets or get more?)<br><br />
<br />
'''CCTV'''<br><br />
<br />
Is "other people" a problem? and how much? CCTV is switched off and maybe moved.<br><br />
Wire CCTV in a way that makes it harder to disable. Kristian will look at/do.<br><br />
<br />
'''Lockable cabinet'''<br><br />
For tools we care about - yes. Alan will look to get a large metal cupboard thing.<br><br />
<br />
'''Clearout'''<br><br />
<br />
There is tons of shite, so Alan will come with trailer. Ellis keen to help. Toby will be required to identify stuff.<br><br />
<br />
The cement mixer bowl "as bin" should go.<br><br />
New bin required<br><br />
<br />
'''Safety'''<br><br />
<br />
Ellis will look through to see what PPE we have<br><br />
Nicholas and Kristian think a communal respirator is a good idea. Alan is not so sure. Ellis would like £1500 welding/respirator thing.<br><br />
<br />
PPE box / cupboard / shelf with names on whos it is<br><br />
<br />
Also, we need (to consider) broom / dustpan / vacuum (Ellis keen) - Henry Hoover will do. (pen paper), latex gloves, bin, wipes, blue-roll,<br><br />
<br />
'''Lock Cabinet'''<br><br />
<br />
Seems required and people are keen. Alan talks of large metal cabinet. Kristian mentioned doorbot technology.<br><br />
<br />
== B-issues for later==<br> <br />
<br />
'''Ventilation'''<br><br />
<br />
Fumes from the welder is the main issue, but general extraction is good.<br />
But, in the longer term, setting on the sandblaster where the hammers are (Ellis will clear that area - possibly creating a hammer board)<br><br />
<br />
Then using good extraction (not just throwing sand out of the window), with general space extraction. Possibly fume-hood for the welder (?)<br><br />
<br />
'''Water'''<br><br />
<br />
Currently, Ellis wheels water to the HS with a crap funnel. This could be better. Kristian suggested taking rainwater at the same time as making the ventilation.<br><br />
<br />
Less Grey Zone<br><br />
<br />
Toby / HS tools are unclear<br><br />
<br />
'''Other'''<br><br />
<br />
The milling machine is not-great, and position might change<br><br />
The hammers desk, Ellis will look to sort out a bit, as it might be where the sandblaster goes<br><br />
The area opposite the lathe is not being used well. The desk is obscuring the shelves, and is not used for much.</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Talk:29/25&diff=2000Talk:29/252025-06-20T14:34:20Z<p>Tim Parnell: </p>
<hr />
<div>== Metalspace Improvements ==<br />
Meeting 2025 19th June with Alan, Ellis, Kristian, Nicholas - about making the Metalspace more Ship-Shape.<br><br />
It's generally accepted to be 'in need of improvement' - make it more useable, better organised, have better control, and only usable by a tiny niche. 'not working for the HS'. <br><br />
<br />
Wiki proposal to implement the improvements<br><br />
<br />
'''A-list'''<br />
Lighting<br><br />
<br />
CCTV<br><br />
<br />
Clearout<br><br />
<br />
Safety<br><br />
<br />
Lock Cabinet<br><br />
<br />
'''B-list'''<br />
Ventilation<br><br />
<br />
Water<br><br />
<br />
Less Grey Zone<br><br />
<br />
Other notes<br><br />
<br />
'''Users'''<br><br />
<br />
Big Users<br />
* Kristian<br />
* Ellis<br />
* Ned<br />
* Jordan<br />
* Toby<br />
* (Nicholas)<br />
'''* Rare Users'''<br />
* Andy<br />
* Barny<br />
* (Plexer?)<br><br />
<br />
'''Lighting'''<br><br />
<br />
Everybody's big #1<br><br />
Getting the central bulb in, is easiest and first, and we have access to mark's big ladder<br><br />
Lighting above the lathe, ellis will make a bracket for - extend 1m+ out, and be drilled into the wall<br><br />
Maybe other lighting ideas. Kristian will look at wiring options. (avoid sockets or get more?)<br><br />
<br />
'''CCTV'''<br><br />
<br />
Is "other people" a problem? and how much? CCTV is switched off and maybe moved.<br><br />
Wire CCTV in a way that makes it harder to disable. Kristian will look at/do.<br><br />
<br />
'''Lockable cabinet'''<br><br />
For tools we care about - yes. Alan will look to get a large metal cupboard thing.<br><br />
<br />
'''Clearout'''<br><br />
<br />
There is tons of shite, so Alan will come with trailer. Ellis keen to help. Toby will be required to identify stuff.<br><br />
<br />
The cement mixer bowl "as bin" should go.<br><br />
New bin required<br><br />
<br />
'''Safety'''<br><br />
<br />
Ellis will look through to see what PPE we have<br><br />
Nicholas and Kristian think a communal respirator is a good idea. Alan is not so sure. Ellis would like £1500 welding/respirator thing.<br><br />
<br />
PPE box / cupboard / shelf with names on whos it is<br><br />
<br />
Also, we need (to consider) broom / dustpan / vacuum (Ellis keen) - Henry Hoover will do. (pen paper), latex gloves, bin, wipes, blue-roll,<br><br />
<br />
'''Lock Cabinet'''<br><br />
<br />
Seems required and people are keen. Alan talks of large metal cabinet. Kristian mentioned doorbot technology.<br><br />
<br />
== B-issues for later<br> ==<br />
<br />
'''Ventilation<br>'''<br />
<br />
Fumes from the welder is the main issue, but general extraction is good.<br />
But, in the longer term, setting on the sandblaster where the hammers are (ellis will clear that area - possibly creating a hammer board)<br><br />
<br />
Then using good extraction (not just throwing sand out of the window), with general space extraction. Possibly fume-hood for the welder (?)<br><br />
<br />
'''Water'''<br><br />
<br />
currently, ellis wheels water to the HS with a crap funnel. This could be better. Kristian suggested taking rain water at the same time as making the ventilation.<br><br />
<br />
Less Grey Zone<br><br />
<br />
Toby/ HS tools are unclear<br><br />
<br />
'''Other'''<br><br />
<br />
The milling machine is not-great, and position might change<br />
The hammers desk, ellis will look to sort out a bit, as it might be where the sandblaster goes<br />
The area opposite the lathe is not being used well. The desk is obscuring the shelves, and is not used for much.</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Talk:29/25&diff=1999Talk:29/252025-06-20T14:29:01Z<p>Tim Parnell: /* Metalspace Improvements */</p>
<hr />
<div>== Metalspace Improvements ==<br />
Meeting 2025 19th June with Alan, Ellis, Kristian, Nicholas - about making the Metalspace more Ship-Shape. It's generally accepted to be 'in need of improvement' - make it more useable, better organised, have better control, and only usable by a tiny niche. 'not working for the HS'. <br><br />
<br />
Wiki proposal to implenment the improvements<br><br />
<br />
'''A-list'''<br />
Lighting<br><br />
<br />
CCTV<br><br />
<br />
Clearout<br><br />
<br />
Safety<br><br />
<br />
Lock Cabinet<br><br />
<br />
'''B-list'''<br />
Ventilation<br><br />
<br />
Water<br><br />
<br />
Less Grey Zone<br><br />
<br />
Other notes<br><br />
<br />
'''Users'''<br><br />
<br />
Big Users<br />
* Kristian<br />
* Ellis<br />
* Ned<br />
* Jordan<br />
* Toby<br />
* (Nicholas)<br />
'''* Rare Users'''<br />
* Andy<br />
* Barny<br />
* (Plexer?)<br><br />
<br />
'''Lighting'''<br><br />
<br />
Everybody's big #1<br />
Getting the central bulb in, is easiest and first, and we have access to mark's big ladder<br />
Lighting above the lathe, ellis will make a bracket for - extend 1m+ out, and be drilled into the wall<br />
Maybe other lighting ideas. Kristian will look at wiring options. (avoid sockets or get more?)<br><br />
<br />
'''CCTV'''<br><br />
<br />
Is "other people" a problem? and how much? CCTV is switched off and maybe moved.<br />
Wire CCTV in a way that makes it harder to disable. Kristian will look at/do.<br><br />
<br />
'''Lockable cabinet'''<br><br />
For tools we care about - yes. Alan will look to get a large metal cupboard thing.<br><br />
<br />
'''Clearout'''<br><br />
<br />
There is tons of shite, so Alan will come with trailer. Ellis keen to help. Toby will be required to identify stuff.<br><br />
<br />
The cemement mixer bowl "as bin" should go.New bin required<br><br />
'''<br />
Safety'''<br><br />
<br />
Ellis will look through to see what PPE we have<br />
N and K think a communal respirator is a good idea. Alan is not so sure. Ellis would like £1500 welding/respirator thing.<br><br />
<br />
PPE box / cupboard / shelf with names on whos it is<br><br />
<br />
Also, we need (to consider) broom / dustpan / vacuum (ellis keen) - henry hoover will do. (pen paper), latex gloves, bin, wipes, blue-roll,<br><br />
<br />
'''Lock Cabinet'''<br><br />
<br />
Seems required and people are keen. Alan talks of large metal cabinet. Kristian mentioned doorbot technology.<br><br />
<br />
== B-issues for later<br> ==<br />
<br />
'''Ventilation<br>'''<br />
<br />
Fumes from the welder is the main issue, but general extraction is good.<br />
But, in the longer term, setting on the sandblaster where the hammers are (ellis will clear that area - possibly creating a hammer board)<br><br />
<br />
Then using good extraction (not just throwing sand out of the window), with general space extraction. Possibly fume-hood for the welder (?)<br><br />
<br />
'''Water'''<br><br />
<br />
currently, ellis wheels water to the HS with a crap funnel. This could be better. Kristian suggested taking rain water at the same time as making the ventilation.<br><br />
<br />
Less Grey Zone<br><br />
<br />
Toby/ HS tools are unclear<br><br />
<br />
'''Other'''<br><br />
<br />
The milling machine is not-great, and position might change<br />
The hammers desk, ellis will look to sort out a bit, as it might be where the sandblaster goes<br />
The area opposite the lathe is not being used well. The desk is obscuring the shelves, and is not used for much.</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Talk:29/25&diff=1998Talk:29/252025-06-20T14:28:26Z<p>Tim Parnell: /* Metalspace Improvements */</p>
<hr />
<div>== Metalspace Improvements ==<br />
Meeting 2025 19th June with Alan, Ellis, Kristian, Nicholas - about making the Metalspace more Ship-Shape. It's generally accepted to be 'in need of improvememt' - make it more useable, better organised, have better control, and only usable by a tiny niche. 'not working for the HS'. <br><br />
<br />
Wiki proposal to implenment the improvements<br><br />
<br />
'''A-list'''<br />
Lighting<br><br />
<br />
CCTV<br><br />
<br />
Clearout<br><br />
<br />
Safety<br><br />
<br />
Lock Cabinet<br><br />
<br />
'''B-list'''<br />
Ventilation<br><br />
<br />
Water<br><br />
<br />
Less Grey Zone<br><br />
<br />
Other notes<br><br />
<br />
'''Users'''<br><br />
<br />
Big Users<br />
* Kristian<br />
* Ellis<br />
* Ned<br />
* Jordan<br />
* Toby<br />
* (Nicholas)<br />
'''* Rare Users'''<br />
* Andy<br />
* Barny<br />
* (Plexer?)<br><br />
<br />
'''Lighting'''<br><br />
<br />
Everybody's big #1<br />
Getting the central bulb in, is easiest and first, and we have access to mark's big ladder<br />
Lighting above the lathe, ellis will make a bracket for - extend 1m+ out, and be drilled into the wall<br />
Maybe other lighting ideas. Kristian will look at wiring options. (avoid sockets or get more?)<br><br />
<br />
'''CCTV'''<br><br />
<br />
Is "other people" a problem? and how much? CCTV is switched off and maybe moved.<br />
Wire CCTV in a way that makes it harder to disable. Kristian will look at/do.<br><br />
<br />
'''Lockable cabinet'''<br><br />
For tools we care about - yes. Alan will look to get a large metal cupboard thing.<br><br />
<br />
'''Clearout'''<br><br />
<br />
There is tons of shite, so Alan will come with trailer. Ellis keen to help. Toby will be required to identify stuff.<br><br />
<br />
The cemement mixer bowl "as bin" should go.New bin required<br><br />
'''<br />
Safety'''<br><br />
<br />
Ellis will look through to see what PPE we have<br />
N and K think a communal respirator is a good idea. Alan is not so sure. Ellis would like £1500 welding/respirator thing.<br><br />
<br />
PPE box / cupboard / shelf with names on whos it is<br><br />
<br />
Also, we need (to consider) broom / dustpan / vacuum (ellis keen) - henry hoover will do. (pen paper), latex gloves, bin, wipes, blue-roll,<br><br />
<br />
'''Lock Cabinet'''<br><br />
<br />
Seems required and people are keen. Alan talks of large metal cabinet. Kristian mentioned doorbot technology.<br><br />
<br />
== B-issues for later<br> ==<br />
<br />
'''Ventilation<br>'''<br />
<br />
Fumes from the welder is the main issue, but general extraction is good.<br />
But, in the longer term, setting on the sandblaster where the hammers are (ellis will clear that area - possibly creating a hammer board)<br><br />
<br />
Then using good extraction (not just throwing sand out of the window), with general space extraction. Possibly fume-hood for the welder (?)<br><br />
<br />
'''Water'''<br><br />
<br />
currently, ellis wheels water to the HS with a crap funnel. This could be better. Kristian suggested taking rain water at the same time as making the ventilation.<br><br />
<br />
Less Grey Zone<br><br />
<br />
Toby/ HS tools are unclear<br><br />
<br />
'''Other'''<br><br />
<br />
The milling machine is not-great, and position might change<br />
The hammers desk, ellis will look to sort out a bit, as it might be where the sandblaster goes<br />
The area opposite the lathe is not being used well. The desk is obscuring the shelves, and is not used for much.</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=30/25&diff=199130/252025-06-18T15:59:52Z<p>Tim Parnell: /* Who is supporting the project */</p>
<hr />
<div>== Title ==<br />
Bambu Lab AMS 2 Pro for 3D print room<br />
<br />
[[File:Ams 2 Pro.jpg|thumb]]<br />
<br />
== Proposer ==<br />
Issy Szemeti<br />
<br />
== Date proposed ==<br />
16/06/2025<br />
<br />
== Date for Decision ==<br />
TBA<br />
<br />
== Cost ==<br />
<br />
£299<br />
<br />
== What is being asked for ==<br />
<br />
Acquisition of a brand new Bambu Lab AMS 2 Pro [https://uk.store.bambulab.com/products/ams-2-pro bambulab.com]<br />
<br />
== Why/how this will be good to have ==<br />
<br />
We now have 2 Bambu Lab P1S printers. Only one of them has an AMS device attached. If we had an AMS on both printers it would be much easier for members to print with different materials/filaments, and the active filament on the second printer would stay drier, which improves the quality and consistency of prints. It makes it much easier to switch between filaments, which is useful if you need to print something on a niche filament type that isn't currently loaded.<br />
<br />
== Who is supporting the project ==<br />
<br />
Issy, Kristian, Liam, Stef, Percy, TimP<br />
<br />
== Comments ==<br />
<br />
== Outcome ==<br />
<br />
<br />
go to [[Proposals_and_decision_making_-_open |proposals]]<br></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=29/25&diff=196929/252025-04-04T11:44:17Z<p>Tim Parnell: /* Who is supporting the project */</p>
<hr />
<div>== Title ==<br />
Metal Space upgrade<br><br />
<br />
<br />
== Proposer ==<br><br />
<br />
Ellis and Alan<br><br />
<br />
== Date proposed ==<br><br />
29/3/25<br><br />
<br />
== Date for Decision ==<br><br />
7/4/25<br><br />
<br />
== Cost ==<br><br />
£500 to ?<br />
<br />
== What is being asked for ==<br />
<br><br />
Revamp the metal space: tidy up, remove rubbish. Maybe re-paint floor, look at benching, <br><br />
Decide minimum tools required for space<br><br />
Tool storage (shadow boards, tool boxes)<br><br />
review PPE and general upkeep (dustpans, bins, brooms etc)<br><br />
Signage<br><br />
anything else<br><br />
<br />
<br />
== Why/how this will be good to have ==<br><br />
<br />
To make the Metal space a nicer, safer envirioment with a cleaner looking and well laid out workshop. This will make the place more inviting and better working place for all our members.<br><br />
<br />
== Who is supporting the project ==<br />
<br />
TimP, KristiaN, Ellis, Stef, Helen, Paula, Uggy, Issy.<br />
<br />
== Comments ==<br />
Link to last improvement plan.<br><br />
https://wiki.norwichhackspace.org/index.php?title=Metal_workshop_improvements_mk1<br />
<br />
== Outcome ==<br />
<br />
<br />
go to [[Proposals_and_decision_making_-_open |proposals]]<br></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Russian_A0_laser_cutter&diff=1787Russian A0 laser cutter2024-09-20T13:48:42Z<p>Tim Parnell: /* Tech specs */</p>
<hr />
<div><div id="mw-content-text" lang="en" dir="ltr" class="mw-content-ltr"><div style="font-weight: bold; text-align: center; width: 60% margin-left: auto; margin-right: auto; font-size: 1.3em; border: 2px solid red;"><br />
<p><span style="color:red">'''RED'''</span> equipment: Do not use without specific training. <br />
<br/></div><br />
<br><br />
<br />
==Read Me==<br />
<br />
This is a new (secondhand) piece of kit it's not currently available for use until it's refurbished<br />
<br />
'''25/09/2023 - Current status'''<br />
<br />
Chain for Z drive has been replaced and now it moves.<br />
<br />
All 3 mirrors have been replaced as the existing ones were scrap.<br />
<br />
Replacement belt for X axis is on order as the existing one was too short for the new laser head.<br />
<br />
Old tube and PSU from small laser cutter has been used to test the laser can be fired, successful however control pad was showing weird fading in and out<br />
<br />
Next steps are<br />
* Rewire all stepper motors to ensure connections are solid<br />
* Add XYZ endstops for homing<br />
* Run air line to head<br />
* Replace cooling hoses<br />
* Build laser tube support system from 2020 extrusion<br />
* Replace tube with 90w (100w max) SPT tube from Megacold TR90 with built in coaxial red dot £228<br />
* Replace power supply with this [https://www.amazon.co.uk/dp/B07C2QN5ZD/ref=sspa_dk_detail_1?ie=UTF8&pd_rd_i=B07C2QN5ZDp13NParams&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&th=1 one] £150<br />
* Replace controller with RUIDA with pendant £369<br />
* PC / Tablet to run it<br />
* Honeycomb beds<br />
* Extraction<br />
<br />
==Training==<br />
<br />
You must not use the laser cutter without being trained. The laser cutter is unlikely to hurt you, but you can easily hurt '''it''' without training. For more information about laser cutter training ask on Slack in the lasercutter channel<br />
<br />
==Costs==<br />
<br />
* Training - Free<br />
* Usage - £8/hour, £1/10minutes<br />
* Consumables - Bring your own and/or use what is in the off cuts bin or purchase from the HS stock via iZettle, but always ensure (rather than assume) it's [[Laser_Cutter/Instructions#Chlorine_Testing_and_Material_Safety|laser safe]].<br />
<br />
==How to==<br />
* [[Lasercut Illuminated Acrylic sign]]<br />
<br />
==Tech specs==<br />
{| class="wikitable"<br />
|-<br />
! Spec !! Value<br />
|-<br />
| Laser power: || 90-100W Co2 laser tube<br />
|-<br />
| Maximum cutting area: || 1200 x 900mm<br />
|-<br />
| Body dimensions:|| 1800 x 1300 x 900mm<br />
|-<br />
| Repeatability:|| ± 0.05mm<br />
|-<br />
| Power source:|| AC 110 – 220V ± 10%, 50 – 60Hz<br />
|-<br />
| Total power:|| <1,000 W<br />
|-<br />
| Operating temperature:|| 0 – 45 °C<br />
|-<br />
| Humidity:|| 5 – 95%<br />
|-<br />
| Minimum character size:|| 2mm Chinese character alphanumeric 1mm<br />
|-<br />
| Corresponding data format:|| BMP, PLT, DST, DXF, and AI<br />
|-<br />
| Operating system:|| stepper motor<br />
|-<br />
| Cooling system:|| water-cooled<br />
|-<br />
| Control system:|| Leetro Controller<br />
|-<br />
| Weight:|| 170kg<br />
|-<br />
| Kerf:|| 0.1mm<br />
|-<br />
|}<br />
<br />
== Laser Cutter instructions == <br />
<br />
[[Laser Cutter/Instructions|Laser Cutter Instructions]]<br />
<br />
==Rules==<br />
;'''1) Never leave the laser cutter running unattended*'''<br />
:You should always be next to the Laser Cutter and paying attention to it while the laser is active, ''I cannot state how important it is to monitor the laser cutter whilst it is in use, it knows when you're not watching and will burst into flames the second you turn your back.'' If you have to leave the laser cutter unattended, use the pause button. '''In case of fire''': use the fire blanket first if that doesn't work use the CO<sub>2</sub> extinguisher by the laser cutter and/or raise the fire alarm.<br />
<br />
;'''2) If the Laser Cutter breaks or behaves abnormally, put it Out of Order and post on Slack'''<br />
:If the laser cutter starts behaving weirdly, doesn't cut correctly with the correct settings, makes <strike>interesting</strike> worrying noises, any of the ancillary machines (cooler/extractor/air assist) are not working properly or if there has been a fire, place it out of order and post to Slack detailing what went wrong. If you don't use slack, get someone else to post for you.<br />
<br />
;'''3) Do not use if you haven't had training'''<br />
A trained member can do a job for another person as long as the trained member is the one using the laser cutter.<br />
<br />
;'''4) You must be a member of Norwich Hackspace to use the laser cutter'''<br />
:The Laser Cutter is a machine owned and operated by Norwich Hackspace, therefore you must be a member to use it. If you were a trained member and your membership payments have lapsed, access will automatically be revoked until you become a member again. Having a trained member cut a job for a non-member is perfectly fine.<br />
<br />
;'''5) Always pay for your usage'''<br />
:The Laser Cutter costs £5/hour to use. You only have to pay for the time that the laser is active for, not any setup or preparation time. All money goes towards maintenance and buying consumables like mirrors, lenses and new laser tubes. If there is not enough money to cover the cost of consumables when something needs replacing due to people using the Laser Cutter without paying, they simply won't be bought, rendering the Laser Cutter out of order until we find another way of raising money to cover the costs.<br />
<br />
;'''6) Only cut approved materials of an acceptable thickness, never cut materials on the banned list or materials that are too thick.*'''<br />
:If you would like to cut a material that is not on the Approved List, contact one of the maintainers, we will do some research and testing (or instruct you to do the testing) to see if the materials is safe to laser cut, if it is, it will be added to the Approved List. Acceptable thicknesses are shown on the cutting parameters page.<br />
<br />
;'''7) Log all jobs correctly in the logbook - not currently used'''<br />
:Currently, the logbook is the only way the maintainers can view the status of the cutter and how it's performing on a day-to-day basis. It is vital that you complete this for each job done with any power settings used; you can add multiple jobs together into a single log if they used the same settings, material and were all successful. A link to the logbook is on the desktop, on the bookmarks bar or [ here].<br />
<br />
;'''8) Do not disable any of the ancillary components such as the air assist, extractor or cooler'''<br />
:These all have their purpose in protecting the Laser Cutter and making it work correctly, please do not disable any of these for any reason whatsoever.<br />
<br />
;'''9) Don't place cutting waste in the scrap bins'''<br />
: The scrap bins are only for usable bits of material you don't want any more. '''A usable bit of material is anything 10cm<sup>2</sup> or larger without any cuts or engraving on it'''. Please snap any unusable bits off to make it as small as possible. Cutting waste is fully recyclable and can be placed in any bin in the hackspace, PLEASE DO NOT PUT IT IN THE SCRAPS BIN!<br />
<br />
'''Violation of these rules will result in either a verbal warning, a written warning, being made to redo the training, a temporary ban or in the most extreme cases a permanent ban issues by the maintainers. We will try and be as fair as possible and we really don't want to punish people and prevent them from using the machine, we'd much rather educate about the correct way to use it. However, this is not an excuse for rules ignorance.'''<br />
<br />
'''*Violation of rules 1 or 3 (or excessive violation of rule 6) will result in an immediate ban without warning.'''<br />
<br />
<u>'''All bans will be made public and be able to be appealed against.'''</u><br />
<br />
==Software==<br />
* [https://lightburnsoftware.com/ Lightburn] - The greatest lasercutter software ever<br />
* [https://xoihazard.com/tools/halftone/ Halftone vector generator] - Takes a picture and converts it into a representation of the image using ploygons. Its a cool way to get around the lack of greyscale functionality<br />
<br />
==Where to get supplies/consumables/materials==<br />
* [https://www.timbernorwich.co.uk/cushion-norwich.html] - Barn Road, Norwich - 4 and 6mm ply<br />
* [http://www.hamaracrylic.co.uk/hamar_acrylic_products.aspx Hamar] - 16A Bidder Street London, E16 4ST. 8am-5pm Mon-Fri<br />
* [https://hobarts.com/sheet-materials_124/ Hobarts] - mail order<br />
* [http://kitronic.co.uk Kitronic] - mail order, good ply<br />
* [http://www.blueprintmodel.co.uk/ Bluprint models] Arch 258, Paradise Row, Bethnal Green, London. E2 9LE - On Cambridge Heath Road - & mail order - good for MDF, their perspex is shit<br />
* [http://www.mdfcuttosize.com/ MDF Cut to Size] - 413 Wick Lane, Bow, London, E3 2JG - Pay for the size you want cut<br />
* [http://www.thenaturalworkshop.co.uk/ The Natural Workshop (Website)] - [http://stores.ebay.co.uk/thenaturalworkshop/ The Natural Workshop (eBay)]- mail order<br />
* [https://www.jennortimber.co.uk/products/plywood Jennor Timber], Lockfield Avenue, Enfield EN3 7QL, or 13 Braintree Rd, Ruislip HA4 0EJ. Laser grade birch ply. Not listed on their website, but they do it - it's in their catalogue, and they know their stuff. Give them a call.<br />
<br />
==List of allowed and banned materials ==<br />
===Allowed===<br />
====Woods====<br />
* Laser-grade plywood<br />
** Birch ply (max 9mm)<br />
** Poplar ply (max 9mm)<br />
* Balsa wood<br />
* Paper (cutting only)<br />
* Card/Cardboard (cutting only) [[tips on lasercutting card]]<br />
* MDF - small amounts of MDF or engraving on MDF products is ok'ish<br />
<br />
====Plastics====<br />
* Thin Polypropylene sheet (<1mm) <br />
* Acrylic (max 10mm)<br />
* [[tips on lasercutting foam | Foamcore]] (non-PVC variety)<br />
* Correx (Genuine non PVC)<br />
* Depron foam (Fire risk, must be closely monitored)<br />
* EVA Foam (if real)<br />
* Delrin (max 8mm)<br />
<br />
====Textiles====<br />
* Cloth/felt/hemp/cotton (Not plastic-impregnated fabric)<br />
* Polar Fleece<br />
<br />
====For engraving only====<br />
* Stone (Engrave only)<br />
* Ceramic tile (Engrave only)<br />
* Non-resinous wood IE hardwood (Engrave only)<br />
* Glass (Engrave only)<br />
* Anodised Aluminium (Engrave only)<br />
<br />
===Explicitly banned===<br />
<br />
You should only be cutting materials on the Allowed list.<br />
<br />
If you want to cut a material which is not on this list, contact one of the maintainers and get them to OK it first.<br />
<br />
* Food (laser contamination, fire risk, emissions)<br />
* Body parts<br />
* Plastics containing PVC (laser contamination, emissions)<br />
* Plastics containing ABS (laser contamination, fire risk, cyanide emission)<br />
* Fibreglass (laser contamination, fire risk, emissions)<br />
* Circuit boards (laser contamination, fire risk, emissions)<br />
* Polycarbonate (laser contamination, fire risk)<br />
* All metal (except engraving anodized aluminium)<br />
* Polystyrene (laser contamination, fire risk, emissions)<br />
* Polypropylene (laser contamination, fire risk, emissions)<br />
* HDPE (high-density polyethylene or polyethylene) (laser contamination, fire risk, emissions)<br />
* Carbon fibre (laser contamination, fire risk, emissions)<br />
* Shuttering ply (laser contamination, fire risk, emissions)<br />
* Latex (laser contamination, fire risk, emissions)<br />
<br />
== Cutting Parameters ==<br />
'''For list of material settings, see [[A2_Greyfin_Laser_Cutter_Materials_Information|Cutting Parameters]].<br />
<br />
== Trainers and maintainers ==<br />
<br />
If you have questions or problems with the laser cutter, please speak to one of these people:<br />
<br />
* Ben - Plexer<br />
<br />
<br />
==Technical Specs==<br />
* Glass laser tube (150W rated power) - recommended max tube current 22mA<br />
* "Uknnown" laser power supply<br />
* Leetro motion controller<br />
* LaserCut? software.<br />
* water cooler<br />
<br />
==Tips&Tricks==<br />
* Print&Cut - [https://www.youtube.com/watch?v=pOl75orZw3I Saving a job that didn't cut all the way through]<br />
<br />
[[Category:Tools for use on wood]]<br />
[[Category:Tools for use on plastic]]</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Russian_A0_laser_cutter&diff=1786Russian A0 laser cutter2024-09-20T12:26:11Z<p>Tim Parnell: /* Costs */</p>
<hr />
<div><div id="mw-content-text" lang="en" dir="ltr" class="mw-content-ltr"><div style="font-weight: bold; text-align: center; width: 60% margin-left: auto; margin-right: auto; font-size: 1.3em; border: 2px solid red;"><br />
<p><span style="color:red">'''RED'''</span> equipment: Do not use without specific training. <br />
<br/></div><br />
<br><br />
<br />
==Read Me==<br />
<br />
This is a new (secondhand) piece of kit it's not currently available for use until it's refurbished<br />
<br />
'''25/09/2023 - Current status'''<br />
<br />
Chain for Z drive has been replaced and now it moves.<br />
<br />
All 3 mirrors have been replaced as the existing ones were scrap.<br />
<br />
Replacement belt for X axis is on order as the existing one was too short for the new laser head.<br />
<br />
Old tube and PSU from small laser cutter has been used to test the laser can be fired, successful however control pad was showing weird fading in and out<br />
<br />
Next steps are<br />
* Rewire all stepper motors to ensure connections are solid<br />
* Add XYZ endstops for homing<br />
* Run air line to head<br />
* Replace cooling hoses<br />
* Build laser tube support system from 2020 extrusion<br />
* Replace tube with 90w (100w max) SPT tube from Megacold TR90 with built in coaxial red dot £228<br />
* Replace power supply with this [https://www.amazon.co.uk/dp/B07C2QN5ZD/ref=sspa_dk_detail_1?ie=UTF8&pd_rd_i=B07C2QN5ZDp13NParams&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&th=1 one] £150<br />
* Replace controller with RUIDA with pendant £369<br />
* PC / Tablet to run it<br />
* Honeycomb beds<br />
* Extraction<br />
<br />
==Training==<br />
<br />
You must not use the laser cutter without being trained. The laser cutter is unlikely to hurt you, but you can easily hurt '''it''' without training. For more information about laser cutter training ask on Slack in the lasercutter channel<br />
<br />
==Costs==<br />
<br />
* Training - Free<br />
* Usage - £8/hour, £1/10minutes<br />
* Consumables - Bring your own and/or use what is in the off cuts bin or purchase from the HS stock via iZettle, but always ensure (rather than assume) it's [[Laser_Cutter/Instructions#Chlorine_Testing_and_Material_Safety|laser safe]].<br />
<br />
==How to==<br />
* [[Lasercut Illuminated Acrylic sign]]<br />
<br />
==Tech specs==<br />
{| class="wikitable"<br />
|-<br />
! Spec !! Value<br />
|-<br />
| Laser power: || 150W Co2 laser tube<br />
|-<br />
| Maximum cutting area: || 1200 x 900mm<br />
|-<br />
| Body dimensions:|| 1800 x 1300 x 900mm<br />
|-<br />
| Repeatability:|| ± 0.05mm<br />
|-<br />
| Power source:|| AC 110 – 220V ± 10%, 50 – 60Hz<br />
|-<br />
| Total power:|| <1,000 W<br />
|-<br />
| Operating temperature:|| 0 – 45 °C<br />
|-<br />
| Humidity:|| 5 – 95%<br />
|-<br />
| Minimum character size:|| 2mm Chinese character alphanumeric 1mm<br />
|-<br />
| Corresponding data format:|| BMP, PLT, DST, DXF, and AI<br />
|-<br />
| Operating system:|| stepper motor<br />
|-<br />
| Cooling system:|| water-cooled<br />
|-<br />
| Control system:|| Leetro Controller<br />
|-<br />
| Weight:|| 170kg<br />
|-<br />
| Kerf:|| 0.1mm<br />
|-<br />
|}<br />
<br />
== Laser Cutter instructions == <br />
<br />
[[Laser Cutter/Instructions|Laser Cutter Instructions]]<br />
<br />
==Rules==<br />
;'''1) Never leave the laser cutter running unattended*'''<br />
:You should always be next to the Laser Cutter and paying attention to it while the laser is active, ''I cannot state how important it is to monitor the laser cutter whilst it is in use, it knows when you're not watching and will burst into flames the second you turn your back.'' If you have to leave the laser cutter unattended, use the pause button. '''In case of fire''': use the fire blanket first if that doesn't work use the CO<sub>2</sub> extinguisher by the laser cutter and/or raise the fire alarm.<br />
<br />
;'''2) If the Laser Cutter breaks or behaves abnormally, put it Out of Order and post on Slack'''<br />
:If the laser cutter starts behaving weirdly, doesn't cut correctly with the correct settings, makes <strike>interesting</strike> worrying noises, any of the ancillary machines (cooler/extractor/air assist) are not working properly or if there has been a fire, place it out of order and post to Slack detailing what went wrong. If you don't use slack, get someone else to post for you.<br />
<br />
;'''3) Do not use if you haven't had training'''<br />
A trained member can do a job for another person as long as the trained member is the one using the laser cutter.<br />
<br />
;'''4) You must be a member of Norwich Hackspace to use the laser cutter'''<br />
:The Laser Cutter is a machine owned and operated by Norwich Hackspace, therefore you must be a member to use it. If you were a trained member and your membership payments have lapsed, access will automatically be revoked until you become a member again. Having a trained member cut a job for a non-member is perfectly fine.<br />
<br />
;'''5) Always pay for your usage'''<br />
:The Laser Cutter costs £5/hour to use. You only have to pay for the time that the laser is active for, not any setup or preparation time. All money goes towards maintenance and buying consumables like mirrors, lenses and new laser tubes. If there is not enough money to cover the cost of consumables when something needs replacing due to people using the Laser Cutter without paying, they simply won't be bought, rendering the Laser Cutter out of order until we find another way of raising money to cover the costs.<br />
<br />
;'''6) Only cut approved materials of an acceptable thickness, never cut materials on the banned list or materials that are too thick.*'''<br />
:If you would like to cut a material that is not on the Approved List, contact one of the maintainers, we will do some research and testing (or instruct you to do the testing) to see if the materials is safe to laser cut, if it is, it will be added to the Approved List. Acceptable thicknesses are shown on the cutting parameters page.<br />
<br />
;'''7) Log all jobs correctly in the logbook - not currently used'''<br />
:Currently, the logbook is the only way the maintainers can view the status of the cutter and how it's performing on a day-to-day basis. It is vital that you complete this for each job done with any power settings used; you can add multiple jobs together into a single log if they used the same settings, material and were all successful. A link to the logbook is on the desktop, on the bookmarks bar or [ here].<br />
<br />
;'''8) Do not disable any of the ancillary components such as the air assist, extractor or cooler'''<br />
:These all have their purpose in protecting the Laser Cutter and making it work correctly, please do not disable any of these for any reason whatsoever.<br />
<br />
;'''9) Don't place cutting waste in the scrap bins'''<br />
: The scrap bins are only for usable bits of material you don't want any more. '''A usable bit of material is anything 10cm<sup>2</sup> or larger without any cuts or engraving on it'''. Please snap any unusable bits off to make it as small as possible. Cutting waste is fully recyclable and can be placed in any bin in the hackspace, PLEASE DO NOT PUT IT IN THE SCRAPS BIN!<br />
<br />
'''Violation of these rules will result in either a verbal warning, a written warning, being made to redo the training, a temporary ban or in the most extreme cases a permanent ban issues by the maintainers. We will try and be as fair as possible and we really don't want to punish people and prevent them from using the machine, we'd much rather educate about the correct way to use it. However, this is not an excuse for rules ignorance.'''<br />
<br />
'''*Violation of rules 1 or 3 (or excessive violation of rule 6) will result in an immediate ban without warning.'''<br />
<br />
<u>'''All bans will be made public and be able to be appealed against.'''</u><br />
<br />
==Software==<br />
* [https://lightburnsoftware.com/ Lightburn] - The greatest lasercutter software ever<br />
* [https://xoihazard.com/tools/halftone/ Halftone vector generator] - Takes a picture and converts it into a representation of the image using ploygons. Its a cool way to get around the lack of greyscale functionality<br />
<br />
==Where to get supplies/consumables/materials==<br />
* [https://www.timbernorwich.co.uk/cushion-norwich.html] - Barn Road, Norwich - 4 and 6mm ply<br />
* [http://www.hamaracrylic.co.uk/hamar_acrylic_products.aspx Hamar] - 16A Bidder Street London, E16 4ST. 8am-5pm Mon-Fri<br />
* [https://hobarts.com/sheet-materials_124/ Hobarts] - mail order<br />
* [http://kitronic.co.uk Kitronic] - mail order, good ply<br />
* [http://www.blueprintmodel.co.uk/ Bluprint models] Arch 258, Paradise Row, Bethnal Green, London. E2 9LE - On Cambridge Heath Road - & mail order - good for MDF, their perspex is shit<br />
* [http://www.mdfcuttosize.com/ MDF Cut to Size] - 413 Wick Lane, Bow, London, E3 2JG - Pay for the size you want cut<br />
* [http://www.thenaturalworkshop.co.uk/ The Natural Workshop (Website)] - [http://stores.ebay.co.uk/thenaturalworkshop/ The Natural Workshop (eBay)]- mail order<br />
* [https://www.jennortimber.co.uk/products/plywood Jennor Timber], Lockfield Avenue, Enfield EN3 7QL, or 13 Braintree Rd, Ruislip HA4 0EJ. Laser grade birch ply. Not listed on their website, but they do it - it's in their catalogue, and they know their stuff. Give them a call.<br />
<br />
==List of allowed and banned materials ==<br />
===Allowed===<br />
====Woods====<br />
* Laser-grade plywood<br />
** Birch ply (max 9mm)<br />
** Poplar ply (max 9mm)<br />
* Balsa wood<br />
* Paper (cutting only)<br />
* Card/Cardboard (cutting only) [[tips on lasercutting card]]<br />
* MDF - small amounts of MDF or engraving on MDF products is ok'ish<br />
<br />
====Plastics====<br />
* Thin Polypropylene sheet (<1mm) <br />
* Acrylic (max 10mm)<br />
* [[tips on lasercutting foam | Foamcore]] (non-PVC variety)<br />
* Correx (Genuine non PVC)<br />
* Depron foam (Fire risk, must be closely monitored)<br />
* EVA Foam (if real)<br />
* Delrin (max 8mm)<br />
<br />
====Textiles====<br />
* Cloth/felt/hemp/cotton (Not plastic-impregnated fabric)<br />
* Polar Fleece<br />
<br />
====For engraving only====<br />
* Stone (Engrave only)<br />
* Ceramic tile (Engrave only)<br />
* Non-resinous wood IE hardwood (Engrave only)<br />
* Glass (Engrave only)<br />
* Anodised Aluminium (Engrave only)<br />
<br />
===Explicitly banned===<br />
<br />
You should only be cutting materials on the Allowed list.<br />
<br />
If you want to cut a material which is not on this list, contact one of the maintainers and get them to OK it first.<br />
<br />
* Food (laser contamination, fire risk, emissions)<br />
* Body parts<br />
* Plastics containing PVC (laser contamination, emissions)<br />
* Plastics containing ABS (laser contamination, fire risk, cyanide emission)<br />
* Fibreglass (laser contamination, fire risk, emissions)<br />
* Circuit boards (laser contamination, fire risk, emissions)<br />
* Polycarbonate (laser contamination, fire risk)<br />
* All metal (except engraving anodized aluminium)<br />
* Polystyrene (laser contamination, fire risk, emissions)<br />
* Polypropylene (laser contamination, fire risk, emissions)<br />
* HDPE (high-density polyethylene or polyethylene) (laser contamination, fire risk, emissions)<br />
* Carbon fibre (laser contamination, fire risk, emissions)<br />
* Shuttering ply (laser contamination, fire risk, emissions)<br />
* Latex (laser contamination, fire risk, emissions)<br />
<br />
== Cutting Parameters ==<br />
'''For list of material settings, see [[A2_Greyfin_Laser_Cutter_Materials_Information|Cutting Parameters]].<br />
<br />
== Trainers and maintainers ==<br />
<br />
If you have questions or problems with the laser cutter, please speak to one of these people:<br />
<br />
* Ben - Plexer<br />
<br />
<br />
==Technical Specs==<br />
* Glass laser tube (150W rated power) - recommended max tube current 22mA<br />
* "Uknnown" laser power supply<br />
* Leetro motion controller<br />
* LaserCut? software.<br />
* water cooler<br />
<br />
==Tips&Tricks==<br />
* Print&Cut - [https://www.youtube.com/watch?v=pOl75orZw3I Saving a job that didn't cut all the way through]<br />
<br />
[[Category:Tools for use on wood]]<br />
[[Category:Tools for use on plastic]]</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=178502/242024-06-21T14:21:11Z<p>Tim Parnell: /* Outcome */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
1 week - time pressure from FB sale.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
Media: £50 - £148.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).''' Basically half price.<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blast Media:''' £50 just an example 5 x 25kg https://problastingsupplies.com/product/5-x-25kg-jblast-blasting-media-standard-1-4-to-2-5mm/<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
Ellis Waller<br />
<br />
barnyr<br />
<br />
tim_p<br />
<br />
Tim_F<br />
<br />
Peter_h<br />
<br />
Dean<br />
<br />
Jay_Crisp<br />
<br />
KristiaN<br />
<br />
Dave T<br />
<br />
Goffy<br />
<br />
karlablitt<br />
<br />
plexer<br />
<br />
== Comments ==<br />
'''Concerns raised'''<br />
<br />
Tobyc - "it would be useful, the main thing we must consider is the other tenants. it not acceptable to cover eveyones stuff in sand and its very hard to keep the sand in one place"<br />
<br />
mario - "Is it possible to construct a tent? Tbh I can see the use for one but considerable downsides. Is there a sandblaster nearby that we could come to a discount deal with?"<br />
<br />
Alan - this has been approved on the proviso that it does not interfere with other tenants of the Metalspace. If it becaome a problem we will sell it on. <br />
<br />
'''NB:''' Tobyc is metalspace lead<br />
<br />
== Outcome ==<br />
Agreed - waiting action<br />
<br />
'''Ordered.''' £97.95 on credit card.<br />
<br />
Should be despatched Monday - Arrive Tuesday 26th June.<br />
<br />
Have not ordered any blast media <br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=178402/242024-06-21T14:20:23Z<p>Tim Parnell: /* Outcome */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
1 week - time pressure from FB sale.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
Media: £50 - £148.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).''' Basically half price.<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blast Media:''' £50 just an example 5 x 25kg https://problastingsupplies.com/product/5-x-25kg-jblast-blasting-media-standard-1-4-to-2-5mm/<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
Ellis Waller<br />
<br />
barnyr<br />
<br />
tim_p<br />
<br />
Tim_F<br />
<br />
Peter_h<br />
<br />
Dean<br />
<br />
Jay_Crisp<br />
<br />
KristiaN<br />
<br />
Dave T<br />
<br />
Goffy<br />
<br />
karlablitt<br />
<br />
plexer<br />
<br />
== Comments ==<br />
'''Concerns raised'''<br />
<br />
Tobyc - "it would be useful, the main thing we must consider is the other tenants. it not acceptable to cover eveyones stuff in sand and its very hard to keep the sand in one place"<br />
<br />
mario - "Is it possible to construct a tent? Tbh I can see the use for one but considerable downsides. Is there a sandblaster nearby that we could come to a discount deal with?"<br />
<br />
Alan - this has been approved on the proviso that it does not interfere with other tenants of the Metalspace. If it becaome a problem we will sell it on. <br />
<br />
'''NB:''' Tobyc is metalspace lead<br />
<br />
== Outcome ==<br />
Agreed - waiting action<br />
<br />
Ordered. £97.95 on credit card.<br />
Should be despatched Monday - Arrive Tuesday 26th June.<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=178102/242024-06-19T15:33:32Z<p>Tim Parnell: /* What is being asked for */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
1 week - time pressure from FB sale.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
Media: £50 - £148.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).''' Basically half price.<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blast Media:''' £50 just an example 5 x 25kg https://problastingsupplies.com/product/5-x-25kg-jblast-blasting-media-standard-1-4-to-2-5mm/<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
Ellis Waller<br />
<br />
barnyr<br />
<br />
tim_p<br />
<br />
Tim_F<br />
<br />
Peter_h<br />
<br />
Dean<br />
<br />
Jay_Crisp<br />
<br />
KristiaN<br />
<br />
Dave T<br />
<br />
Goffy<br />
<br />
karlablitt<br />
<br />
plexer<br />
<br />
== Comments ==<br />
'''Concerns raised'''<br />
<br />
Tobyc - "it would be useful, the main thing we must consider is the other tenants. it not acceptable to cover eveyones stuff in sand and its very hard to keep the sand in one place"<br />
<br />
mario - "Is it possible to construct a tent? Tbh I can see the use for one but considerable downsides. Is there a sandblaster nearby that we could come to a discount deal with?"<br />
<br />
'''NB:''' Tobyc is metalspace lead<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=178002/242024-06-19T15:09:35Z<p>Tim Parnell: /* What is being asked for */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
1 week - time pressure from FB sale.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
Media: £50 - £148.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).''' Basically half price.<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blast Media:''' £50 i have no link.<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
Ellis Waller<br />
<br />
barnyr<br />
<br />
tim_p<br />
<br />
Tim_F<br />
<br />
Peter_h<br />
<br />
Dean<br />
<br />
Jay_Crisp<br />
<br />
KristiaN<br />
<br />
Dave T<br />
<br />
Goffy<br />
<br />
karlablitt<br />
<br />
plexer<br />
<br />
== Comments ==<br />
'''Concerns raised'''<br />
<br />
Tobyc - "it would be useful, the main thing we must consider is the other tenants. it not acceptable to cover eveyones stuff in sand and its very hard to keep the sand in one place"<br />
<br />
mario - "Is it possible to construct a tent? Tbh I can see the use for one but considerable downsides. Is there a sandblaster nearby that we could come to a discount deal with?"<br />
<br />
'''NB:''' Tobyc is metalspace lead<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=177902/242024-06-19T15:08:39Z<p>Tim Parnell: /* Date for Decision */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
1 week - time pressure from FB sale.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
Media: £50 - £148.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).'''<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blast Media:''' £50 i have no link.<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
Ellis Waller<br />
<br />
barnyr<br />
<br />
tim_p<br />
<br />
Tim_F<br />
<br />
Peter_h<br />
<br />
Dean<br />
<br />
Jay_Crisp<br />
<br />
KristiaN<br />
<br />
Dave T<br />
<br />
Goffy<br />
<br />
karlablitt<br />
<br />
plexer<br />
<br />
== Comments ==<br />
'''Concerns raised'''<br />
<br />
Tobyc - "it would be useful, the main thing we must consider is the other tenants. it not acceptable to cover eveyones stuff in sand and its very hard to keep the sand in one place"<br />
<br />
mario - "Is it possible to construct a tent? Tbh I can see the use for one but considerable downsides. Is there a sandblaster nearby that we could come to a discount deal with?"<br />
<br />
'''NB:''' Tobyc is metalspace lead<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=177802/242024-06-19T15:08:06Z<p>Tim Parnell: /* Cost */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
As sub £100 decision - 1 week.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
Media: £50 - £148.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).'''<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blast Media:''' £50 i have no link.<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
Ellis Waller<br />
<br />
barnyr<br />
<br />
tim_p<br />
<br />
Tim_F<br />
<br />
Peter_h<br />
<br />
Dean<br />
<br />
Jay_Crisp<br />
<br />
KristiaN<br />
<br />
Dave T<br />
<br />
Goffy<br />
<br />
karlablitt<br />
<br />
plexer<br />
<br />
== Comments ==<br />
'''Concerns raised'''<br />
<br />
Tobyc - "it would be useful, the main thing we must consider is the other tenants. it not acceptable to cover eveyones stuff in sand and its very hard to keep the sand in one place"<br />
<br />
mario - "Is it possible to construct a tent? Tbh I can see the use for one but considerable downsides. Is there a sandblaster nearby that we could come to a discount deal with?"<br />
<br />
'''NB:''' Tobyc is metalspace lead<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=177702/242024-06-19T15:07:23Z<p>Tim Parnell: /* What is being asked for */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
As sub £100 decision - 1 week.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).'''<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blast Media:''' £50 i have no link.<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
Ellis Waller<br />
<br />
barnyr<br />
<br />
tim_p<br />
<br />
Tim_F<br />
<br />
Peter_h<br />
<br />
Dean<br />
<br />
Jay_Crisp<br />
<br />
KristiaN<br />
<br />
Dave T<br />
<br />
Goffy<br />
<br />
karlablitt<br />
<br />
plexer<br />
<br />
== Comments ==<br />
'''Concerns raised'''<br />
<br />
Tobyc - "it would be useful, the main thing we must consider is the other tenants. it not acceptable to cover eveyones stuff in sand and its very hard to keep the sand in one place"<br />
<br />
mario - "Is it possible to construct a tent? Tbh I can see the use for one but considerable downsides. Is there a sandblaster nearby that we could come to a discount deal with?"<br />
<br />
'''NB:''' Tobyc is metalspace lead<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=177602/242024-06-19T14:56:20Z<p>Tim Parnell: /* Who is for it */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
As sub £100 decision - 1 week.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).'''<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blaster:'''<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
Ellis Waller<br />
<br />
barnyr<br />
<br />
tim_p<br />
<br />
Tim_F<br />
<br />
Peter_h<br />
<br />
Dean<br />
<br />
Jay_Crisp<br />
<br />
KristiaN<br />
<br />
Dave T<br />
<br />
Goffy<br />
<br />
karlablitt<br />
<br />
plexer<br />
<br />
== Comments ==<br />
'''Concerns raised'''<br />
<br />
Tobyc - "it would be useful, the main thing we must consider is the other tenants. it not acceptable to cover eveyones stuff in sand and its very hard to keep the sand in one place"<br />
<br />
mario - "Is it possible to construct a tent? Tbh I can see the use for one but considerable downsides. Is there a sandblaster nearby that we could come to a discount deal with?"<br />
<br />
'''NB:''' Tobyc is metalspace lead<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=177502/242024-06-19T14:56:04Z<p>Tim Parnell: /* Who is for it */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
As sub £100 decision - 1 week.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).'''<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blaster:'''<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
Ellis Waller<br />
barnyr<br />
<br />
tim_p<br />
<br />
Tim_F<br />
<br />
Peter_h<br />
<br />
Dean<br />
<br />
Jay_Crisp<br />
<br />
KristiaN<br />
<br />
Dave T<br />
<br />
Goffy<br />
<br />
karlablitt<br />
<br />
plexer<br />
<br />
== Comments ==<br />
'''Concerns raised'''<br />
<br />
Tobyc - "it would be useful, the main thing we must consider is the other tenants. it not acceptable to cover eveyones stuff in sand and its very hard to keep the sand in one place"<br />
<br />
mario - "Is it possible to construct a tent? Tbh I can see the use for one but considerable downsides. Is there a sandblaster nearby that we could come to a discount deal with?"<br />
<br />
'''NB:''' Tobyc is metalspace lead<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=177402/242024-06-19T14:54:00Z<p>Tim Parnell: /* Comments */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
As sub £100 decision - 1 week.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).'''<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blaster:'''<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
Ellis Waller<br />
<br />
barnyr<br />
<br />
tim_p<br />
<br />
Tim_F<br />
<br />
Peter_h<br />
<br />
Dean<br />
<br />
Jay_Crisp<br />
<br />
KristiaN<br />
<br />
Dave T<br />
<br />
Goffy<br />
<br />
karlablitt<br />
<br />
== Comments ==<br />
'''Concerns raised'''<br />
<br />
Tobyc - "it would be useful, the main thing we must consider is the other tenants. it not acceptable to cover eveyones stuff in sand and its very hard to keep the sand in one place"<br />
<br />
mario - "Is it possible to construct a tent? Tbh I can see the use for one but considerable downsides. Is there a sandblaster nearby that we could come to a discount deal with?"<br />
<br />
'''NB:''' Tobyc is metalspace lead<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=177302/242024-06-19T14:53:17Z<p>Tim Parnell: /* Who is for it */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
As sub £100 decision - 1 week.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).'''<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blaster:'''<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
Ellis Waller<br />
<br />
barnyr<br />
<br />
tim_p<br />
<br />
Tim_F<br />
<br />
Peter_h<br />
<br />
Dean<br />
<br />
Jay_Crisp<br />
<br />
KristiaN<br />
<br />
Dave T<br />
<br />
Goffy<br />
<br />
karlablitt<br />
<br />
== Comments ==<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=177202/242024-06-19T14:52:52Z<p>Tim Parnell: /* Who is for it */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
As sub £100 decision - 1 week.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).'''<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blaster:'''<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
Ellis Waller<br />
barnyr<br />
tim_p<br />
Tim_F<br />
Peter_h<br />
Dean<br />
Jay_Crisp<br />
KristiaN<br />
Dave T<br />
Goffy<br />
karlablitt<br />
<br />
'''Raising concerns'''<br />
Tobyc - "it would be useful, the main thing we must consider is the other tenants. it not acceptable to cover eveyones stuff in sand and its very hard to keep the sand in one place"<br />
mario - "Is it possible to construct a tent? Tbh I can see the use for one but considerable downsides. Is there a sandblaster nearby that we could come to a discount deal with?"<br />
<br />
== Comments ==<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=177102/242024-06-19T14:46:49Z<p>Tim Parnell: /* Why/how this will be good to have */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
As sub £100 decision - 1 week.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).'''<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blaster:'''<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
Multiple uses in metalworking / stripping small wood items / finishing 3D prints / making "sea glass".<br />
<br />
== Who is for it ==<br />
<br />
<br />
== Comments ==<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=177002/242024-06-19T14:45:51Z<p>Tim Parnell: /* What is being asked for */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
As sub £100 decision - 1 week.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
'''Brand new second (damaged by courier but as new).'''<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
'''Tent:''' £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
'''Blaster:'''<br />
<br />
'''Compressor:''' - we already have several suitable compressors<br />
<br />
== Why/how this will be good to have ==<br />
<br />
<br />
== Who is for it ==<br />
<br />
<br />
== Comments ==<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=176902/242024-06-19T14:45:23Z<p>Tim Parnell: /* Cost */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
As sub £100 decision - 1 week.<br />
<br />
== Cost ==<br />
<br />
£90 plus £8 postage - £98.00<br />
<br />
optionally plus £17.00 for tent<br />
<br />
== What is being asked for ==<br />
<br />
== Why/how this will be good to have ==<br />
<br />
<br />
== Who is for it ==<br />
<br />
<br />
== Comments ==<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=176802/242024-06-19T14:43:57Z<p>Tim Parnell: /* Cost */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
As sub £100 decision - 1 week.<br />
<br />
== Cost ==<br />
https://www.facebook.com/marketplace/item/426808983644432/<br />
<br />
Brand new second (damaged by courier but as new).<br />
<br />
£90 plus £8 postage (or road trip)<br />
<br />
Tent: £17.00<br />
https://www.amazon.co.uk/dp/B0BLN4Q9HD/ref=sspa_dk_detail_3?psc=1&pd_rd_i=B0BLN4Q9HD&pd_rd_w=BRwks&content-id=amzn1.sym.46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_p=46187d6a-4306-4bc6-830c-7b2085e0e39f&pf_rd_r=ETS2FQKN1QVZ824PXRXG&pd_rd_wg=oNOl5&pd_rd_r=11318787-ef56-4b0f-9df4-4ec0958821d5&s=outdoors&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw<br />
<br />
Blaster:<br />
<br />
Compressor - we already have several suitable compressors<br />
<br />
== What is being asked for ==<br />
<br />
== Why/how this will be good to have ==<br />
<br />
<br />
== Who is for it ==<br />
<br />
<br />
== Comments ==<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=176702/242024-06-19T14:38:03Z<p>Tim Parnell: /* Date for Decision */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
As sub £100 decision - 1 week.<br />
<br />
== Cost ==<br />
<!-- this should include purchase cost prefrably with an internet link, cost of consumables, --><br />
<br />
== What is being asked for ==<br />
<br />
== Why/how this will be good to have ==<br />
<br />
<br />
== Who is for it ==<br />
<br />
<br />
== Comments ==<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Proposals_and_decision_making_-_open&diff=1766Proposals and decision making - open2024-06-19T14:37:34Z<p>Tim Parnell: /* Proposals */</p>
<hr />
<div>This page was heavily influenced by Bristol wiki - Alan Scrase 25/9/20<br><br />
<br />
===== Proposals =====<br />
<br />
{| class="wikitable"<br />
|-<br />
! Date !!Proposal no.!! Title !! Proposer !! Status<br />
|-<br />
| 25/09/20 ||01/20 || [[Use this proposal form for future decisions]] || Alan || Approved<br />
|-<br />
| Date || [[02/20]] || Click cell to the left for Example || Proposer || ...<br />
|-<br />
| 29/09/20 || [[03/20]] || Redecoration || Dan R || Approved- main room done<br />
|-<br />
| 10/10/20 || [[04/20]] || Extending the Metal Space || Alan et al || Approved - ongoing<br />
|-<br />
| 19/10/20 || [[05/20]] || Hackspace structure and management || Marion || Open<br />
|-<br />
| 25/11/20 ||[[06/20]]|| [[Proposal_6|Replacement of D7 and curing setup]] || 3D Printing Team|| Approved and actioned<br />
|-<br />
| 27/01/21 ||[[07/20]]|| Lockdown Challenge || Brian || Approved - launch 1 Feb<br />
|-<br />
| 26/04/21 ||[[08/20]]|| VSlot Library || Toby || DRAFT<br />
|-<br />
| 26/5/21 || [[09/20]]|| In-house Retro Arcade Game Cabinet || Tim || Approved and actioned<br />
|-<br />
| 17/8/21 || [[10/21]]|| UNFINISHED PROPOSAL - Lasercutter room fumes air filtering || Proposer || Status<br />
|-<br />
| 27/10/21 || [[11/21]]|| Robot Dog || Plexer || Open<br />
|-<br />
| 12/03/22 || [[12/22]]|| Creating a press for recycled acrylic scraps || Lottie and Victoria || Open<br />
|-<br />
| 5/05/22 || [[13/22]]|| Workshop dust extraction || Alan || Approved in principal - start 1st phase<br />
|-<br />
| 11/05/22 || [[14/22]]|| Router table and routers || Ben || Approved and actioned<br />
|-<br />
| 11/07/22 || [[15/22]]|| Bigger resin Printer || Tim P || Approved and actioned<br />
|-<br />
| 02/09/22 || [[16/22]]|| Fibre Laser Cutter || Ben || Approved and actioned<br />
|-<br />
| 21/12/22 || [[17/22]] || Upgrade CR10 to direct drive with a Hermera hotend and add mesh bed leveling || Dan R/3D Team || Approved<br />
|-<br />
| 3/05/23 || [[18/23]] || Unimac laser cutter 150watt || Ben || Approved and actioned - being commisioned<br />
|-<br />
| 30/09/23 || [[19/23]] || Centrifugal Casting Machine Purchase || Tim Parnell|| Approved and actioned <br />
|-<br />
| 07/11/23|| [[20/23]] || Multifilament Printing - Bambu P1P AMS || Dan Robertson|| Approved and actioned<br />
|-<br />
| Date || [[01/24]] || Yeti Smartbench || Ben Norcutt || Open<br />
|-<br />
| 18/06/24 || [[02/24]] || Sandblasting cabinet || Ellis || Open<br />
|-<br />
| Date || [[02/24]] || Title || Proposer || Status<br />
|-<br />
|}<br />
<br />
<br><br />
to add a proposal please edit the next available '''Proposal no.''' '''21/23'''<br />
<br />
===== <span style="color:red">'''DRAFT'''</span> Hackspace Proposals <span style="color:red">'''DRAFT'''</span>=====<br />
*N.B. If you have paid for goods or services on behalf of the Hackspace, send a PDF of the receipt (and guarantee) to the [[Admin team]]. You can claim the money by asking Marion or the admin team.<br><br />
<br><br />
If you need help making a proposal: ask the [[Lead]] of the area (if appropriate), Admin Team, [[core member]] or another member<br />
<br />
===== Aims and Objectives =====<br />
Hackspace proposals are a method to put forward ideas that would impact on the Hackspace and its members - e.g. purchases, team projects, additional tools and equipment, furnishing the space.<br />
<br />
Proposals should include:<br />
* Name of proposer<br />
* Date proposed<br />
* Title of proposal<br />
* Cost including delivery and on going costs,consumables etc <br />
* A budget if applicable and how funded (e.g. Hackspace, pledge, grant, self funded ) <br />
* Explain what your proposal is about (your chance to sell the story)<br />
* Why and how this would be good for the Hackspace/who would benefit <br />
* State what they depend on in terms of resources and who will undertake any work needed<br />
* Any other implications or impacts such as fumes, safety, space, expertise needed to set-up and maintain<br />
* State what they depend on in terms of resources and who will undertake any work needed<br />
<br />
===== Types of proposal =====<br />
(to be discussed at special meeting 13 October 2020)<br />
<br />
'''General decisions'''<br />
<br />
- Day-to-day hackspace decision eg something that affects members but is minor in nature : ''Proposer plus member of Admin Team to approve. Lead maintainer should be consulted if possible''<br />
<br />
- General hackspace decision eg something that affects all members: ''Requires Wiki proposal (see below) and general member agreement with at least a week timescale and no significant objections. Lead maintainer should be consulted if possible'' <br />
<br />
- Major hackspace decision eg something that affects all members and is significant in impact eg policies, moves, major changes: ''Requires Wiki proposal (see below) General membership consulted. Core Team makes the decision. Timescale appropriate to issue <br />
''<br />
<br />
<br />
'''Purchasing decisions'''<br />
<br />
- H&S or proposal under £50 eg consumables or general supplies : ''Proposer plus member of Admin Team to approve''<br />
<br />
- Small purchase: total cost up to £100. ''Requires Wiki proposal (see below and general member agreement with at least a week timescale and no significant objection. Lead maintainer or core team member to be consulted if possible'' <br />
<br />
- Medium purchase: total cost £100-£500. ''Requires Wiki proposal (see below) discussion and at least two weeks timescale or until 10 members agree and no significant objection. Lead maintainer or core team member to be consulted'' <br />
<br />
- Large purchase: total cost >£600. ''Requires Wiki proposal discussion and at least two weeks timescale or until 10 members agree and no significant objection. Lead maintainer or core team member to be consulted'' <br />
<br />
- Emergency decision : a quick decision can be made by proposer and Admin Team if a proposal has been agreed in principle and an item has become available eg Gumtree purchase that would be missed otherwise. ''Lead maintainer input if possible in time-frame''<br />
<br />
'''''In the case of dispute or indecision, the Core Team have final say (at least 5 members) and may call a meeting if necessary'''''<br />
<br />
===== Principles of decision-making =====<br />
<br />
• Decisions to be made in #decision-making channel in Slack and raised and recorded in the Wiki (extended discussion in appropriate channel)<br />
<br />
• Any member can join #decision-making but those that choose not to effectively leave Hackspace decisions to those that do. It is possible to join and leave the channel depending on interest or capacity at the time.<br />
<br />
• All members have the chance to contribute or comment within the time-scale<br />
<br />
• Enough time to comment. Interested members should check in to #decision-making at least once a week<br />
<br />
• A strong (reasoned) objection can carry more weight than several average agreements and vice versa<br />
<br />
• The deadline provides the end point - a member of the Admin team will summerise and define actions from then on<br />
<br />
• Core members and Lead Maintainers have final say in case of dispute or indecision<br />
<br />
===== How to make a proposal =====<br />
- Write up the proposal on this Wiki. Confused as to how? Then follow this [[proposal-tutorial|step by step tutorial!]]<br />
- Post to #decision-making on Slack.<br />
- Post a wiki link to your proposal on Slack<br />
- If your proposal is approved, proceed with the purchase or follow actions as agreed.<br />
<br />
===== Funding =====<br />
Proposals requiring funds.<br />
<br />
Dependent on the scope and remit of certain proposals it may be appropriate for full or partial funding by Hackspace. Proposals should include an estimated budget ie money and/or other resources (backed by quotations, etc where appropriate) and a funding model.<br />
<br />
Funding models may include:<br />
* fully funded by Hackspace<br />
* Pledge funded with partial split between Hackspace and supportive member backing <br />
* fully member supported<br />
<br />
<br />
<br />
<br />
<br />
<br />
Go back [[https://wiki.norwichhackspace.org/index.php?title=Main_Page#Proposals| back to proposals]]<br><br />
go to [[Main_Page |main page]]<br><br />
go to [[Main_Page#Proposals| proposals]]</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=176502/242024-06-19T14:35:51Z<p>Tim Parnell: /* Date proposed */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== 18th June 2024 ==<br />
<br />
== Date for Decision ==<br />
Usually two weeks after posting<br />
<br />
== Cost ==<br />
<!-- this should include purchase cost prefrably with an internet link, cost of consumables, --><br />
<br />
== What is being asked for ==<br />
<br />
== Why/how this will be good to have ==<br />
<br />
<br />
== Who is for it ==<br />
<br />
<br />
== Comments ==<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=176402/242024-06-19T14:35:17Z<p>Tim Parnell: /* Proposer */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Ellis Waller ==<br />
<br />
== Date proposed ==<br />
<br />
<br />
== Date for Decision ==<br />
Usually two weeks after posting<br />
<br />
== Cost ==<br />
<!-- this should include purchase cost prefrably with an internet link, cost of consumables, --><br />
<br />
== What is being asked for ==<br />
<br />
== Why/how this will be good to have ==<br />
<br />
<br />
== Who is for it ==<br />
<br />
<br />
== Comments ==<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=02/24&diff=176302/242024-06-19T14:35:06Z<p>Tim Parnell: /* Title */</p>
<hr />
<div>== Purchase Sandblasting Cabinet for installation in metalspace ==<br />
<br />
== Proposer ==<br />
<br />
<br />
== Date proposed ==<br />
<br />
<br />
== Date for Decision ==<br />
Usually two weeks after posting<br />
<br />
== Cost ==<br />
<!-- this should include purchase cost prefrably with an internet link, cost of consumables, --><br />
<br />
== What is being asked for ==<br />
<br />
== Why/how this will be good to have ==<br />
<br />
<br />
== Who is for it ==<br />
<br />
<br />
== Comments ==<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Proposals_and_decision_making_-_open&diff=1762Proposals and decision making - open2024-06-19T14:33:34Z<p>Tim Parnell: added proposal sandblaster and moved all approved to approved and actioned.</p>
<hr />
<div>This page was heavily influenced by Bristol wiki - Alan Scrase 25/9/20<br><br />
<br />
===== Proposals =====<br />
<br />
{| class="wikitable"<br />
|-<br />
! Date !!Proposal no.!! Title !! Proposer !! Status<br />
|-<br />
| 25/09/20 ||01/20 || [[Use this proposal form for future decisions]] || Alan || Approved<br />
|-<br />
| Date || [[02/20]] || Click cell to the left for Example || Proposer || ...<br />
|-<br />
| 29/09/20 || [[03/20]] || Redecoration || Dan R || Approved- main room done<br />
|-<br />
| 10/10/20 || [[04/20]] || Extending the Metal Space || Alan et al || Approved - ongoing<br />
|-<br />
| 19/10/20 || [[05/20]] || Hackspace structure and management || Marion || Open<br />
|-<br />
| 25/11/20 ||[[06/20]]|| [[Proposal_6|Replacement of D7 and curing setup]] || 3D Printing Team|| Approved and actioned<br />
|-<br />
| 27/01/21 ||[[07/20]]|| Lockdown Challenge || Brian || Approved - launch 1 Feb<br />
|-<br />
| 26/04/21 ||[[08/20]]|| VSlot Library || Toby || DRAFT<br />
|-<br />
| 26/5/21 || [[09/20]]|| In-house Retro Arcade Game Cabinet || Tim || Approved and actioned<br />
|-<br />
| 17/8/21 || [[10/21]]|| UNFINISHED PROPOSAL - Lasercutter room fumes air filtering || Proposer || Status<br />
|-<br />
| 27/10/21 || [[11/21]]|| Robot Dog || Plexer || Open<br />
|-<br />
| 12/03/22 || [[12/22]]|| Creating a press for recycled acrylic scraps || Lottie and Victoria || Open<br />
|-<br />
| 5/05/22 || [[13/22]]|| Workshop dust extraction || Alan || Approved in principal - start 1st phase<br />
|-<br />
| 11/05/22 || [[14/22]]|| Router table and routers || Ben || Approved and actioned<br />
|-<br />
| 11/07/22 || [[15/22]]|| Bigger resin Printer || Tim P || Approved and actioned<br />
|-<br />
| 02/09/22 || [[16/22]]|| Fibre Laser Cutter || Ben || Approved and actioned<br />
|-<br />
| 21/12/22 || [[17/22]] || Upgrade CR10 to direct drive with a Hermera hotend and add mesh bed leveling || Dan R/3D Team || Approved<br />
|-<br />
| 3/05/23 || [[18/23]] || Unimac laser cutter 150watt || Ben || Approved and actioned - being commisioned<br />
|-<br />
| 30/09/23 || [[19/23]] || Centrifugal Casting Machine Purchase || Tim Parnell|| Approved and actioned <br />
|-<br />
| 07/11/23|| [[20/23]] || Multifilament Printing - Bambu P1P AMS || Dan Robertson|| Approved and actioned<br />
|-<br />
| Date || [[01/24]] || Yeti Smartbench || Ben Norcutt || Open<br />
|-<br />
| Date || [[06/24]] || Sandblasting cabinet || Ellis || Open<br />
|-<br />
| Date || [[02/24]] || Title || Proposer || Status<br />
|-<br />
|}<br />
<br />
<br><br />
to add a proposal please edit the next available '''Proposal no.''' '''21/23'''<br />
<br />
===== <span style="color:red">'''DRAFT'''</span> Hackspace Proposals <span style="color:red">'''DRAFT'''</span>=====<br />
*N.B. If you have paid for goods or services on behalf of the Hackspace, send a PDF of the receipt (and guarantee) to the [[Admin team]]. You can claim the money by asking Marion or the admin team.<br><br />
<br><br />
If you need help making a proposal: ask the [[Lead]] of the area (if appropriate), Admin Team, [[core member]] or another member<br />
<br />
===== Aims and Objectives =====<br />
Hackspace proposals are a method to put forward ideas that would impact on the Hackspace and its members - e.g. purchases, team projects, additional tools and equipment, furnishing the space.<br />
<br />
Proposals should include:<br />
* Name of proposer<br />
* Date proposed<br />
* Title of proposal<br />
* Cost including delivery and on going costs,consumables etc <br />
* A budget if applicable and how funded (e.g. Hackspace, pledge, grant, self funded ) <br />
* Explain what your proposal is about (your chance to sell the story)<br />
* Why and how this would be good for the Hackspace/who would benefit <br />
* State what they depend on in terms of resources and who will undertake any work needed<br />
* Any other implications or impacts such as fumes, safety, space, expertise needed to set-up and maintain<br />
* State what they depend on in terms of resources and who will undertake any work needed<br />
<br />
===== Types of proposal =====<br />
(to be discussed at special meeting 13 October 2020)<br />
<br />
'''General decisions'''<br />
<br />
- Day-to-day hackspace decision eg something that affects members but is minor in nature : ''Proposer plus member of Admin Team to approve. Lead maintainer should be consulted if possible''<br />
<br />
- General hackspace decision eg something that affects all members: ''Requires Wiki proposal (see below) and general member agreement with at least a week timescale and no significant objections. Lead maintainer should be consulted if possible'' <br />
<br />
- Major hackspace decision eg something that affects all members and is significant in impact eg policies, moves, major changes: ''Requires Wiki proposal (see below) General membership consulted. Core Team makes the decision. Timescale appropriate to issue <br />
''<br />
<br />
<br />
'''Purchasing decisions'''<br />
<br />
- H&S or proposal under £50 eg consumables or general supplies : ''Proposer plus member of Admin Team to approve''<br />
<br />
- Small purchase: total cost up to £100. ''Requires Wiki proposal (see below and general member agreement with at least a week timescale and no significant objection. Lead maintainer or core team member to be consulted if possible'' <br />
<br />
- Medium purchase: total cost £100-£500. ''Requires Wiki proposal (see below) discussion and at least two weeks timescale or until 10 members agree and no significant objection. Lead maintainer or core team member to be consulted'' <br />
<br />
- Large purchase: total cost >£600. ''Requires Wiki proposal discussion and at least two weeks timescale or until 10 members agree and no significant objection. Lead maintainer or core team member to be consulted'' <br />
<br />
- Emergency decision : a quick decision can be made by proposer and Admin Team if a proposal has been agreed in principle and an item has become available eg Gumtree purchase that would be missed otherwise. ''Lead maintainer input if possible in time-frame''<br />
<br />
'''''In the case of dispute or indecision, the Core Team have final say (at least 5 members) and may call a meeting if necessary'''''<br />
<br />
===== Principles of decision-making =====<br />
<br />
• Decisions to be made in #decision-making channel in Slack and raised and recorded in the Wiki (extended discussion in appropriate channel)<br />
<br />
• Any member can join #decision-making but those that choose not to effectively leave Hackspace decisions to those that do. It is possible to join and leave the channel depending on interest or capacity at the time.<br />
<br />
• All members have the chance to contribute or comment within the time-scale<br />
<br />
• Enough time to comment. Interested members should check in to #decision-making at least once a week<br />
<br />
• A strong (reasoned) objection can carry more weight than several average agreements and vice versa<br />
<br />
• The deadline provides the end point - a member of the Admin team will summerise and define actions from then on<br />
<br />
• Core members and Lead Maintainers have final say in case of dispute or indecision<br />
<br />
===== How to make a proposal =====<br />
- Write up the proposal on this Wiki. Confused as to how? Then follow this [[proposal-tutorial|step by step tutorial!]]<br />
- Post to #decision-making on Slack.<br />
- Post a wiki link to your proposal on Slack<br />
- If your proposal is approved, proceed with the purchase or follow actions as agreed.<br />
<br />
===== Funding =====<br />
Proposals requiring funds.<br />
<br />
Dependent on the scope and remit of certain proposals it may be appropriate for full or partial funding by Hackspace. Proposals should include an estimated budget ie money and/or other resources (backed by quotations, etc where appropriate) and a funding model.<br />
<br />
Funding models may include:<br />
* fully funded by Hackspace<br />
* Pledge funded with partial split between Hackspace and supportive member backing <br />
* fully member supported<br />
<br />
<br />
<br />
<br />
<br />
<br />
Go back [[https://wiki.norwichhackspace.org/index.php?title=Main_Page#Proposals| back to proposals]]<br><br />
go to [[Main_Page |main page]]<br><br />
go to [[Main_Page#Proposals| proposals]]</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=Proposals_and_decision_making_-_open&diff=1761Proposals and decision making - open2024-06-19T14:30:38Z<p>Tim Parnell: /* Proposals */</p>
<hr />
<div>This page was heavily influenced by Bristol wiki - Alan Scrase 25/9/20<br><br />
<br />
===== Proposals =====<br />
<br />
{| class="wikitable"<br />
|-<br />
! Date !!Proposal no.!! Title !! Proposer !! Status<br />
|-<br />
| 25/09/20 ||01/20 || [[Use this proposal form for future decisions]] || Alan || Approved<br />
|-<br />
| Date || [[02/20]] || Click cell to the left for Example || Proposer || ...<br />
|-<br />
| 29/09/20 || [[03/20]] || Redecoration || Dan R || Approved- main room done<br />
|-<br />
| 10/10/20 || [[04/20]] || Extending the Metal Space || Alan et al || Approved - ongoing<br />
|-<br />
| 19/10/20 || [[05/20]] || Hackspace structure and management || Marion || Open<br />
|-<br />
| 25/11/20 ||[[06/20]]|| [[Proposal_6|Replacement of D7 and curing setup]] || 3D Printing Team|| Approved completed<br />
|-<br />
| 27/01/21 ||[[07/20]]|| Lockdown Challenge || Brian || Approved - launch 1 Feb<br />
|-<br />
| 26/04/21 ||[[08/20]]|| VSlot Library || Toby || DRAFT<br />
|-<br />
| 26/5/21 || [[09/20]]|| In-house Retro Arcade Game Cabinet || Tim || Approved - Final phase in progress<br />
|-<br />
| 17/8/21 || [[10/21]]|| UNFINISHED PROPOSAL - Lasercutter room fumes air filtering || Proposer || Status<br />
|-<br />
| 27/10/21 || [[11/21]]|| Robot Dog || Plexer || Open<br />
|-<br />
| 12/03/22 || [[12/22]]|| Creating a press for recycled acrylic scraps || Lottie and Victoria || Open<br />
|-<br />
| 5/05/22 || [[13/22]]|| Workshop dust extraction || Alan || Approved in principal - start 1st phase<br />
|-<br />
| 11/05/22 || [[14/22]]|| Router table and routers || Ben || Approved and actioned<br />
|-<br />
| 11/07/22 || [[15/22]]|| Bigger resin Printer || Tim Gomi || Approved and actioned<br />
|-<br />
| 02/09/22 || [[16/22]]|| Fibre Laser Cutter || Ben || Approved and actioned<br />
|-<br />
| 21/12/22 || [[17/22]] || Upgrade CR10 to direct drive with a Hermera hotend and add mesh bed leveling || Dan R/3D Team || Approved<br />
|-<br />
| 3/05/23 || [[18/23]] || Unimac laser cutter 150watt || Ben || Approved and actioned - being commisioned<br />
|-<br />
| 30/09/23 || [[19/23]] || Centrifugal Casting Machine Purchase || Tim Parnell|| Approved <br />
|-<br />
| 07/11/23|| [[20/23]] || Multifilament Printing - Bambu P1P AMS || Dan Robertson|| Approved<br />
|-<br />
| Date || [[01/24]] || Yeti Smartbench || Ben Norcutt || Open<br />
|-<br />
| Date || [[02/24]] || Title || Proposer || Status<br />
|-<br />
|}<br />
<br />
<br><br />
to add a proposal please edit the next available '''Proposal no.''' '''21/23'''<br />
<br />
===== <span style="color:red">'''DRAFT'''</span> Hackspace Proposals <span style="color:red">'''DRAFT'''</span>=====<br />
*N.B. If you have paid for goods or services on behalf of the Hackspace, send a PDF of the receipt (and guarantee) to the [[Admin team]]. You can claim the money by asking Marion or the admin team.<br><br />
<br><br />
If you need help making a proposal: ask the [[Lead]] of the area (if appropriate), Admin Team, [[core member]] or another member<br />
<br />
===== Aims and Objectives =====<br />
Hackspace proposals are a method to put forward ideas that would impact on the Hackspace and its members - e.g. purchases, team projects, additional tools and equipment, furnishing the space.<br />
<br />
Proposals should include:<br />
* Name of proposer<br />
* Date proposed<br />
* Title of proposal<br />
* Cost including delivery and on going costs,consumables etc <br />
* A budget if applicable and how funded (e.g. Hackspace, pledge, grant, self funded ) <br />
* Explain what your proposal is about (your chance to sell the story)<br />
* Why and how this would be good for the Hackspace/who would benefit <br />
* State what they depend on in terms of resources and who will undertake any work needed<br />
* Any other implications or impacts such as fumes, safety, space, expertise needed to set-up and maintain<br />
* State what they depend on in terms of resources and who will undertake any work needed<br />
<br />
===== Types of proposal =====<br />
(to be discussed at special meeting 13 October 2020)<br />
<br />
'''General decisions'''<br />
<br />
- Day-to-day hackspace decision eg something that affects members but is minor in nature : ''Proposer plus member of Admin Team to approve. Lead maintainer should be consulted if possible''<br />
<br />
- General hackspace decision eg something that affects all members: ''Requires Wiki proposal (see below) and general member agreement with at least a week timescale and no significant objections. Lead maintainer should be consulted if possible'' <br />
<br />
- Major hackspace decision eg something that affects all members and is significant in impact eg policies, moves, major changes: ''Requires Wiki proposal (see below) General membership consulted. Core Team makes the decision. Timescale appropriate to issue <br />
''<br />
<br />
<br />
'''Purchasing decisions'''<br />
<br />
- H&S or proposal under £50 eg consumables or general supplies : ''Proposer plus member of Admin Team to approve''<br />
<br />
- Small purchase: total cost up to £100. ''Requires Wiki proposal (see below and general member agreement with at least a week timescale and no significant objection. Lead maintainer or core team member to be consulted if possible'' <br />
<br />
- Medium purchase: total cost £100-£500. ''Requires Wiki proposal (see below) discussion and at least two weeks timescale or until 10 members agree and no significant objection. Lead maintainer or core team member to be consulted'' <br />
<br />
- Large purchase: total cost >£600. ''Requires Wiki proposal discussion and at least two weeks timescale or until 10 members agree and no significant objection. Lead maintainer or core team member to be consulted'' <br />
<br />
- Emergency decision : a quick decision can be made by proposer and Admin Team if a proposal has been agreed in principle and an item has become available eg Gumtree purchase that would be missed otherwise. ''Lead maintainer input if possible in time-frame''<br />
<br />
'''''In the case of dispute or indecision, the Core Team have final say (at least 5 members) and may call a meeting if necessary'''''<br />
<br />
===== Principles of decision-making =====<br />
<br />
• Decisions to be made in #decision-making channel in Slack and raised and recorded in the Wiki (extended discussion in appropriate channel)<br />
<br />
• Any member can join #decision-making but those that choose not to effectively leave Hackspace decisions to those that do. It is possible to join and leave the channel depending on interest or capacity at the time.<br />
<br />
• All members have the chance to contribute or comment within the time-scale<br />
<br />
• Enough time to comment. Interested members should check in to #decision-making at least once a week<br />
<br />
• A strong (reasoned) objection can carry more weight than several average agreements and vice versa<br />
<br />
• The deadline provides the end point - a member of the Admin team will summerise and define actions from then on<br />
<br />
• Core members and Lead Maintainers have final say in case of dispute or indecision<br />
<br />
===== How to make a proposal =====<br />
- Write up the proposal on this Wiki. Confused as to how? Then follow this [[proposal-tutorial|step by step tutorial!]]<br />
- Post to #decision-making on Slack.<br />
- Post a wiki link to your proposal on Slack<br />
- If your proposal is approved, proceed with the purchase or follow actions as agreed.<br />
<br />
===== Funding =====<br />
Proposals requiring funds.<br />
<br />
Dependent on the scope and remit of certain proposals it may be appropriate for full or partial funding by Hackspace. Proposals should include an estimated budget ie money and/or other resources (backed by quotations, etc where appropriate) and a funding model.<br />
<br />
Funding models may include:<br />
* fully funded by Hackspace<br />
* Pledge funded with partial split between Hackspace and supportive member backing <br />
* fully member supported<br />
<br />
<br />
<br />
<br />
<br />
<br />
Go back [[https://wiki.norwichhackspace.org/index.php?title=Main_Page#Proposals| back to proposals]]<br><br />
go to [[Main_Page |main page]]<br><br />
go to [[Main_Page#Proposals| proposals]]</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=173619/232023-12-05T14:03:00Z<p>Tim Parnell: /* */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<br />
<big><big>'''Centricast has been SOLD for £450 minus ebay fees'''</big></big><br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sold the Tiranti Centricast for approx £450 less costs. (updated 20/9/23)<br />
'''Meaning overall cost to Hackspace approx £350.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
Andy Saunders<br />
<br />
== Comments ==<br />
There is some concern about space taken, especially in light of the future move.<br />
<br />
I'm confident it's a piece of equipment that will see a lot of use.<br />
<br />
'''Investigating a home brew vulcaniser option.'''<br />
<br />
Due to hot work nature of this machine will have to be housed in Metalspace.<br />
<br />
'''Currently have 2 machines working.''' <br />
<br />
Have acquired 2 melting pots - both need some work.<br />
<br />
Temperature controller. <br />
<br />
Red Compressor (kindly sorted out by Ben)<br />
<br />
Yellow compressor.<br />
<br />
<br />
'''The choice would be to keep the 2 pots, for different metals. <br />
<br />
Or sell the machine, the compressor and one pot. To increase return.'''<br />
<br />
== Outcome ==<br />
Agreed - Tim has got both machines working and is working on next stages<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --><br />
<br />
== ==<br />
go back [[Main_Page#Proposals| proposals]]<br />
https://wiki.norwichhackspace.org/index.php?title=Proposals_and_decision_making_-_open<br />
<br />
Second Machine was sold to Bicorne Miniatures.</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=172219/232023-09-29T16:02:11Z<p>Tim Parnell: /* Comments */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<br />
<big><big>'''Centricast has been SOLD for £450 minus ebay fees'''</big></big><br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sold the Tiranti Centricast for approx £450 less costs. (updated 20/9/23)<br />
'''Meaning overall cost to Hackspace approx £350.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
Andy Saunders<br />
<br />
== Comments ==<br />
There is some concern about space taken, especially in light of the future move.<br />
<br />
I'm confident it's a piece of equipment that will see a lot of use.<br />
<br />
'''Investigating a home brew vulcaniser option.'''<br />
<br />
Due to hot work nature of this machine will have to be housed in Metalspace.<br />
<br />
'''Currently have 2 machines working.''' <br />
<br />
Have acquired 2 melting pots - both need some work.<br />
<br />
Temperature controller. <br />
<br />
Red Compressor (kindly sorted out by Ben)<br />
<br />
Yellow compressor.<br />
<br />
<br />
'''The choice would be to keep the 2 pots, for different metals. <br />
<br />
Or sell the machine, the compressor and one pot. To increase return.'''<br />
<br />
== Outcome ==<br />
Agreed - Tim has got both machines working and is working on next stages<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --><br />
<br />
== ==<br />
go back [[Main_Page#Proposals| proposals]]<br />
https://wiki.norwichhackspace.org/index.php?title=Proposals_and_decision_making_-_open</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=172119/232023-09-29T16:02:02Z<p>Tim Parnell: /* Outcome */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<br />
<big><big>'''Centricast has been SOLD for £450 minus ebay fees'''</big></big><br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sold the Tiranti Centricast for approx £450 less costs. (updated 20/9/23)<br />
'''Meaning overall cost to Hackspace approx £350.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
Andy Saunders<br />
<br />
== Comments ==<br />
There is some concern about space taken, especially in light of the future move.<br />
<br />
I'm confident it's a piece of equipment that will see a lot of use.<br />
<br />
'''Investigating a home brew vulcaniser option.'''<br />
<br />
Due to hot work nature of this machine will have to be housed in Metalspace.<br />
<br />
== Outcome ==<br />
Agreed - Tim has got both machines working and is working on next stages<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --><br />
<br />
== ==<br />
go back [[Main_Page#Proposals| proposals]]<br />
https://wiki.norwichhackspace.org/index.php?title=Proposals_and_decision_making_-_open</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=172019/232023-09-29T16:01:30Z<p>Tim Parnell: /* Outcome */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<br />
<big><big>'''Centricast has been SOLD for £450 minus ebay fees'''</big></big><br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sold the Tiranti Centricast for approx £450 less costs. (updated 20/9/23)<br />
'''Meaning overall cost to Hackspace approx £350.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
Andy Saunders<br />
<br />
== Comments ==<br />
There is some concern about space taken, especially in light of the future move.<br />
<br />
I'm confident it's a piece of equipment that will see a lot of use.<br />
<br />
'''Investigating a home brew vulcaniser option.'''<br />
<br />
Due to hot work nature of this machine will have to be housed in Metalspace.<br />
<br />
== Outcome ==<br />
Agreed - Tim has got both machines working and is working on next stages<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --><br />
<br />
'''Currently have 2 machines working.''' <br />
<br />
Have acquired 2 melting pots - both need some work.<br />
<br />
Temperature controller. <br />
<br />
Red Compressor (kindly sorted out by Ben)<br />
<br />
Yellow compressor.<br />
<br />
<br />
'''The choice would be to keep the 2 pots, for different metals. <br />
<br />
Or sell the machine, the compressor and one pot. To increase return.'''<br />
<br />
== ==<br />
go back [[Main_Page#Proposals| proposals]]<br />
https://wiki.norwichhackspace.org/index.php?title=Proposals_and_decision_making_-_open</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=171919/232023-09-29T16:00:56Z<p>Tim Parnell: /* Outcome */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<br />
<big><big>'''Centricast has been SOLD for £450 minus ebay fees'''</big></big><br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sold the Tiranti Centricast for approx £450 less costs. (updated 20/9/23)<br />
'''Meaning overall cost to Hackspace approx £350.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
Andy Saunders<br />
<br />
== Comments ==<br />
There is some concern about space taken, especially in light of the future move.<br />
<br />
I'm confident it's a piece of equipment that will see a lot of use.<br />
<br />
'''Investigating a home brew vulcaniser option.'''<br />
<br />
Due to hot work nature of this machine will have to be housed in Metalspace.<br />
<br />
== Outcome ==<br />
Agreed - Tim has got both machines working and is working on next stages<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --><br />
'''Currently have 2 machines working.''' <br />
Have acquired 2 melting pots - both need some work.<br />
Temperature controller. <br />
Red Compressor (kindly sorted out by Ben)<br />
Yellow compressor.<br />
<br />
The choice would be to keep the 2 pots, for different metals. <br />
Or sell the machine, the compressor and one pot. To increase return.<br />
<br />
== ==<br />
go back [[Main_Page#Proposals| proposals]]<br />
https://wiki.norwichhackspace.org/index.php?title=Proposals_and_decision_making_-_open</div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=170319/232023-09-20T15:31:19Z<p>Tim Parnell: /* Comments */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<br />
<big><big>'''Centricast has been SOLD for £450 minus ebay fees'''</big></big><br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sold the Tiranti Centricast for approx £450. (updated 20/9/23)<br />
'''Meaning overall cost to Hackspace approx £300.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
Andy Saunders<br />
<br />
== Comments ==<br />
There is some concern about space taken, especially in light of the future move.<br />
<br />
I'm confident it's a piece of equipment that will see a lot of use.<br />
<br />
'''Investigating a home brew vulcaniser option.'''<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=170219/232023-09-20T15:30:23Z<p>Tim Parnell: /* Cost */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<br />
<big><big>'''Centricast has been SOLD for £450 minus ebay fees'''</big></big><br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sold the Tiranti Centricast for approx £450. (updated 20/9/23)<br />
'''Meaning overall cost to Hackspace approx £300.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
Andy Saunders<br />
<br />
== Comments ==<br />
There is some concern about space taken, especially in light of the future move.<br />
<br />
I'm confident it's a piece of equipment that will see a lot of use.<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=170119/232023-09-20T15:30:13Z<p>Tim Parnell: /* Cost */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<big><big>'''Centricast has been SOLD for £450 minus ebay fees'''</big></big><br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sold the Tiranti Centricast for approx £450. (updated 20/9/23)<br />
'''Meaning overall cost to Hackspace approx £300.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
Andy Saunders<br />
<br />
== Comments ==<br />
There is some concern about space taken, especially in light of the future move.<br />
<br />
I'm confident it's a piece of equipment that will see a lot of use.<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=169919/232023-09-19T11:33:22Z<p>Tim Parnell: /* Comments */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sell the Tiranti Centricast for approx £400. <br />
'''Meaning overall cost to Hackspace approx £350.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
Andy Saunders<br />
<br />
== Comments ==<br />
There is some concern about space taken, especially in light of the future move.<br />
<br />
I'm confident it's a piece of equipment that will see a lot of use.<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=169819/232023-09-19T11:32:47Z<p>Tim Parnell: /* Who is for it */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sell the Tiranti Centricast for approx £400. <br />
'''Meaning overall cost to Hackspace approx £350.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
Andy Saunders<br />
<br />
== Comments ==<br />
There is some concern about space taken, especially in light of the future move.<br />
I'm confident it's a piece of equipment that will see a lot of use.<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=169719/232023-09-18T15:06:44Z<p>Tim Parnell: /* Comments */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sell the Tiranti Centricast for approx £400. <br />
'''Meaning overall cost to Hackspace approx £350.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
== Comments ==<br />
There is some concern about space taken, especially in light of the future move.<br />
I'm confident it's a piece of equipment that will see a lot of use.<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=169619/232023-09-18T15:06:05Z<p>Tim Parnell: /* Comments */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sell the Tiranti Centricast for approx £400. <br />
'''Meaning overall cost to Hackspace approx £350.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
== Comments ==<br />
There is some concern about space taken, especially in light of the future move.<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnellhttp://wiki.norwichhackspace.org/index.php?title=19/23&diff=169519/232023-09-18T15:05:29Z<p>Tim Parnell: /* Who is for it */</p>
<hr />
<div>== Centrifugal Casting Machine Purchase ==<br />
<br />
== Proposer ==<br />
Tim Parnell<br />
<br />
== Date proposed ==<br />
Monday 18th September 2023<br />
<br />
== Date for Decision ==<br />
30 Sept 2023<br />
<br />
== Cost ==<br />
Approximately £750 - but cost could be offset £400 with sale of centricast machine.<br />
<br />
== What is being asked for ==<br />
Purchase the 2 centrifugal casting machines for £250. <br />
Purchase electric melting pot for White Metal/Silver/Gold/Copper £250<br />
Vulcaniser for approx £250<br />
<br />
Donor machine will be stripped of parts and the metal sold for scrap - No idea of value. '''Or refurbished and sold running'''<br />
<br />
Or Converted to potters wheel (suggestion from Tom Goff)<br />
<br />
Sell the Tiranti Centricast for approx £400. <br />
'''Meaning overall cost to Hackspace approx £350.''' - less if we sell the second machine as running.<br />
<br />
[https://www.ebay.co.uk/itm/283967448143?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111451%26meid%3De3556c82ec274c76b59ce2a6367c09e8%26pid%3D101196%26rk%3D1%26rkt%3D12%26sd%3D125937837605%26itm%3D283967448143%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv5PairwiseWebWithBBEV2bAndUBSourceDemotionWithUltimatelyBoughtOfCoviewV1&_trksid=p4429486.c101196.m2219&amdata=cksum%3A283967448143e3556c82ec274c76b59ce2a6367c09e8%7Cenc%3AAQAIAAABMPzGgyhK8D4QCApcBuWVQe1qsoN395NgJVWTF7eo2rfipPwdfCio0EI4F5H%252Bx0wtS8%252Fu%252Fr%252FRUxEZ1KxNtbAGuwQqNawa9Mz45LW45pYy0nujfSUTCwPdUC8EGrA3YvJTRBjhm0t0Uf2yjtjEN%252FDbtpDXbHdM%252FifMCHJHSRCovVTsdGK5uLRCEvh5mgyoo5KKUqT6f2ds7PRQxEc88AXK3ykUOKNLnsgkfEerjJRuU8glnFSD9eHk9PsJjVcbT8dPBps7AF7rS9QANRwZ8%252F2yD%252FaFzF8ycENCIIPLoVooykxdtNt1cvwKT%252BxRTlTTG%252FMFQh5LKIZKEd9%252BZyJzANPbaOCtzXkBCAaJMHgs%252Bl%252Bgshx7JC%252FZ1LatdQuHyY5uP62wesJzn9uj9vGJbwsNRGa44B0%253D%7Campid%3APL_CLK%7Cclp%3A4429486 melt pot]<br />
<br />
[https://www.aliexpress.com/item/32788828262.html?src=google&src=google&albch=shopping&acnt=897-548-8760&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en32788828262&ds_e_product_merchant_id=106971610&ds_e_product_country=IE&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20215049712&albag=&isSmbAutoCall=false&needSmbHouyi=false&gclid=CjwKCAjw6p-oBhAYEiwAgg2PgnG-UGCXU-FwQpqLxkDa28qvoL0AM-uAuRixSkR74RDYjUQwflzQtRoCp1QQAvD_BwE&aff_fcid=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=86aa1f02f7e44bd3914e5b8a89173fd1-1695027042848-09983-UneMJZVf&terminal_id=2ebfd5c1605d4a73ad8851cc07b71e84&afSmartRedirect=y vulcaniser]<br />
<br />
== Why/how this will be good to have ==<br />
Enable members to cast small white metal parts, '''miniatures''', '''key fobs''', '''costume jewellery.''' With correct melting pot '''silver jewellery'''.<br />
<br />
== Who is for it ==<br />
Tim Parnell<br />
<br />
Stef Cabrini<br />
<br />
Dan R<br />
<br />
Nick Cull<br />
<br />
Lottie Matless<br />
<br />
Jay Crisp<br />
<br />
Peter H<br />
<br />
== Comments ==<br />
<br />
== Outcome ==<br />
<br />
<!-- This can be used to update the progress of the proposal --><br />
<!-- Agreed - Completed<br />
Agreed - waiting action<br />
Rejected - <br />
More information required<br />
On hold --></div>Tim Parnell