Norwich Hackspace - User contributions [en-gb]

3D print Room

2025-06-16T18:22:00Z

Percy:

== Maintainers ==
* Tim @tim_p
* Kristian @KristiaN
* Dean @Dean

== Training Requirements ==
Whilst all use of Tools and Equipment is at your own risk each one will have a colour code denoting how much knowledge is required to operated it

* '''RED''' - You must be inducted by the maintainer / trainer and signed off as being competent
* '''ORANGE''' - You must read all the provided information and assess yourself as being competent of using the tool safely, if in doubt ask the area maintainer or other member for help
* '''GREEN''' - Fill your boots

== Ender 3 ==
Training Requirements - '''ORANGE''' 
* [[Ender3 Info]]
* [[Lender Ender]]

====Specifications for Creality Ender 3:====
* Technology: FDM
* Print Area: 220 x 220 x 250mm
* Nozzle: 0.4mm
* Filament: 1.75mm PLA, ABS, TPU
* Max. Print Speed: 200mm/s
* Max. Layer Resolution: 0.1mm
* Print Precision: +/-0.1mm
* Heated Bed: Yes
* Connectivity: SD Card
* LCD Screen: Yes

Files are sliced in '''Cura''' (on 3D print room PC) and put on SD card for printing

== CR-10 ==
Training Requirements - '''ORANGE''' 
==== Specifications for CR10 ====
* Printing technology: FDM (Fused Deposition Modeling), single extruder
* Build volume: 300 x 300 x 400 mm
* Layer resolution: 0.1 to 0.4 mm
* Filament diameter: 1.75 mm
* Nozzle diameter: 0.4 mm, 0.3 mm
* Print speed: 80 to 200 mm/s
* Connectivity: USB, micro SD card
* Input rating: 110V/220V AC, 50/60 Hz
* Working Voltage: 12V DC
* Max nozzle temperature: 270 °C
* Max heated build plate temperature: 100°C

Files are sliced in '''Cura''' (on 3D print room PC) and put on SD card for printing

== Phrozen Sonic Mini 4k ==
Training Requirements - '''RED''' 
====Specifications for Phrozen Sonic Mini 4K====
Technology: DLP (Digital Light Processing) 
Build Volume: 134 x 75 x 130 mm 
Layer Resolution: 35 microns 
Printable materials: 405 NM UV resin 

Files are prepared on '''Chitubox''' on the 3D room PC and transferred by USB stick.
The touch screen on the Phrozen controls printing from USB stick. 
Purchased in Xxxxx for £XXX.XX using Hackspace funds. 

[[Equipment_Info:_Phrozen_Sonic_Mini_4k | Phrozen Mini 4k page]]

== Phrozen Sonic Mighty 4k ==
Training Requirements - '''RED''' 
====Specifications for Phrozen Sonic Mighty 4K====
Technology: DLP (Digital Light Processing) 
Build Volume: 200 x 125 x 220 mm 
Layer Resolution: 35 microns 
Printable materials: 405 NM UV resin 

Files are prepared on '''Chitubox''' on the 3D room PC and transferred by USB stick.
The touch screen on the Phrozen controls printing from USB stick. 
Purchased in July 2022 for £508.00 using Hackspace funds. 

== Anycubic Wash & Cure 2.0 ==
Training Requirements - '''GREEN''' 
Wash and Cure station for use with DLP prints.
Filled with Isopropyl Alcohol (IPA).

== Wanhao d7 - Currently out of commission ==
Training Requirements - '''RED''' 
==== Specifications for Wanhao D7 ====
Technology: DLP (Digital Light Processing) 
Build Volume: 120 x 68 x 180mm 
Layer Resolution: 35 microns 
Printable materials: 405 NM UV resin 

Raspberry pi runs '''NanoDLP''', which is the software which sends the 'plates' to the printer. Connect to NanoDLP from the hackspace computer, or on a computer on the same network 
Purchased in November 2017 for £610.16 using money pledged by members £356 and Hackspace funds. 

[[equipment_info_wanhao_d7 | D7 page]]

== Ultimaker 2 ==
No longer in service

== Printer ==
Training Requirements - '''GREEN''' 
'''A3 colour laser printer'''

== Hackspace PC ==
Training Requirements - '''GREEN''' 

== Resin Cure stuff ==
Training Requirements - '''RED''' 

== Fridge of filaments + other nick-nacks ==
Training Requirements - '''GREEN''' 

== Airbrush (somewhere) ==
Training Requirements - '''ORANGE''' 
"we have a spray booth and i have a fan and tube i can donate"

== Comparison of 3d print filament materials ==
====PLA====
biodegradable, lower temperature, less toxic.
specific brands vary considerably (~10%?)
====ABS====
more toxic, stronger? needs heated bed
* [https://www.instructables.com/Is-3D-Printing-Safe-or-DIY-Testing-for-HCN-from-/ instructables link looking at 3d print toxicity]
====Resin: white====
brittle, not as strong, needs UV curing (in water) after print
====Resin: 4K Grey====
not so brittle, stronger, needs UV curing after print

== Comparison of PLA vs ABS vs PETg ==
An article comparing ABS and PETg 
https://all3dp.com/2/petg-vs-abs-3d-printing-filaments-compared/
An article comparing PETg and PLA 
https://all3dp.com/2/petg-vs-pla-3d-printing-filaments-compared/

Norwich Science Festival 2021

2021-10-24T13:33:34Z

Percy: /* Member Attendance */

The day they really want us to cover is Tuesday 26th October, which is "Engineering Day".

It's worth remembering that this will be half-term, so lots of excited children about.

We need to start setting up early, from 7:30am and be ready by 9am.

Between 9:30am and 10:30 is advertised as "Quiet Hour" in the exploratorium, next door, so we might need to be careful with what equipment is running at this time.

At past Forum events people start drifing in around 9am till 5pm, but it's 10am till 4pm that is most busy.

== Area Setup ==

Total Area about 4m x 3m, two power sockets (we need to bring extention leads), they have wi-fi (Library and Forum,) they can provide tables.

Food / Drink wise, the Forum has an excellent coffee shop and they have never been bothered about taking cups to the stands.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally, we want to move everything in as quickly as possible.

* LoRa / 4G / WiFi Gateway
* 2 x Monitors (Scratch / Arduino?)
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

* Alan Childs - Setup, Everyday, all hours
* Tom G - Setup, Everyday, all hours

== Member Projects On Display ==

* Alan C - Oscilloscope and Servo using Scratch programming

* Dan R - Laser cut violin
* Tom G - Would prefer to only do one day. Can bring 8-bit computer. I also have the line following robot which I built for the local scout group. The kids just need to
stick black insulation tape to the floor and the robot will follow it.
It runs off a atmel 1288p-pu and boots straight to BASIC. The BASIC is very very basic with very few instructions and no floating point numbers.
* Barny R - I'm off work that week, so I'll either be about or i'll be away. If I'm about, I could bring in the Pen plotter as well.
* Toby C - Light up sign. clap to change the animation and program with blocks.

Norwich Science Festival 2021

2021-10-24T13:33:15Z

Percy: /* Equipment to bring on day */

The day they really want us to cover is Tuesday 26th October, which is "Engineering Day".

It's worth remembering that this will be half-term, so lots of excited children about.

We need to start setting up early, from 7:30am and be ready by 9am.

Between 9:30am and 10:30 is advertised as "Quiet Hour" in the exploratorium, next door, so we might need to be careful with what equipment is running at this time.

At past Forum events people start drifing in around 9am till 5pm, but it's 10am till 4pm that is most busy.

== Area Setup ==

Total Area about 4m x 3m, two power sockets (we need to bring extention leads), they have wi-fi (Library and Forum,) they can provide tables.

Food / Drink wise, the Forum has an excellent coffee shop and they have never been bothered about taking cups to the stands.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally, we want to move everything in as quickly as possible.

* LoRa / 4G / WiFi Gateway
* 2 x Monitors (Scratch / Arduino?)
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

Alan Childs - Setup, Everyday, all hours
Tom G - Setup, Everyday, all hours

== Member Projects On Display ==

* Alan C - Oscilloscope and Servo using Scratch programming

* Dan R - Laser cut violin
* Tom G - Would prefer to only do one day. Can bring 8-bit computer. I also have the line following robot which I built for the local scout group. The kids just need to
stick black insulation tape to the floor and the robot will follow it.
It runs off a atmel 1288p-pu and boots straight to BASIC. The BASIC is very very basic with very few instructions and no floating point numbers.
* Barny R - I'm off work that week, so I'll either be about or i'll be away. If I'm about, I could bring in the Pen plotter as well.
* Toby C - Light up sign. clap to change the animation and program with blocks.

Norwich Science Festival 2021

2021-10-24T13:30:37Z

Percy:

The day they really want us to cover is Tuesday 26th October, which is "Engineering Day".

It's worth remembering that this will be half-term, so lots of excited children about.

We need to start setting up early, from 7:30am and be ready by 9am.

Between 9:30am and 10:30 is advertised as "Quiet Hour" in the exploratorium, next door, so we might need to be careful with what equipment is running at this time.

At past Forum events people start drifing in around 9am till 5pm, but it's 10am till 4pm that is most busy.

== Area Setup ==

Total Area about 4m x 3m, two power sockets (we need to bring extention leads), they have wi-fi (Library and Forum,) they can provide tables.

Food / Drink wise, the Forum has an excellent coffee shop and they have never been bothered about taking cups to the stands.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally, we want to move everything in as quickly as possible.

* LoRa / 4G / WiFi Gateway
* 2 x Monitors
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

Alan Childs - Setup, Everyday, all hours
Tom G - Setup, Everyday, all hours

== Member Projects On Display ==

* Alan C - Oscilloscope and Servo using Scratch programming

* Dan R - Laser cut violin
* Tom G - Would prefer to only do one day. Can bring 8-bit computer. I also have the line following robot which I built for the local scout group. The kids just need to
stick black insulation tape to the floor and the robot will follow it.
It runs off a atmel 1288p-pu and boots straight to BASIC. The BASIC is very very basic with very few instructions and no floating point numbers.
* Barny R - I'm off work that week, so I'll either be about or i'll be away. If I'm about, I could bring in the Pen plotter as well.
* Toby C - Light up sign. clap to change the animation and program with blocks.

Norwich Science Festival 2021

2021-10-14T14:50:07Z

Percy: /* Member Projects On Display */

The day they really want us to cover is Tuesday 26th October, which is "Engineering Day".
They have offered (and Percy has suggested) the Monday 25th which is "Digitech Day".
So we need to cover 26th, and if we can cover 25th even better.

It's worth remembering that this will be half-term, so lots of excited children about.

Between 9:30am and 10:30 is advertised as "Quiet Hour" in the exploratorium, next door, so we might need to be careful with what equipment is running at this time.

At past Forum events people start drifing in around 9am till 5pm, but it's 10am till 4pm that is busy.
Ideally, we need to set up around 8am.

== Area Setup ==

Total Area 4m x 3m, two power sockets (we need to bring extention leads), wi-fi (Library and Forum,) they can provide tables.

Food / Drink wise, the Forum has an excellent coffee shop and they have never been bothered about taking cups to the stands.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally we want to move everything in as quickly as possible.

* LoRa / 4G / WiFi Gateway
* 2 x Monitors
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

Alan Childs - Setup, Everyday, all hours
Ben Norcutt - I could look at being around depending on pto I have left

== Member Projects On Display ==

* Alan C - Oscilloscope and Servo using Scratch programming

* Dan R - Laser cut violin
* Tom G - Would prefer to only do one day. Can bring 8-bit computer. I also have the line following robot which I built for the local scout group. The kids just need to stick black
insulation tape to the floor and the robot will follow it.
It runs off a atmel 1288p-pu and boots straight to BASIC. The BASIC is very very basic with very few instructions and no floating point numbers.
* Barny R - I'm off work that week, so I'll either be about or i'll be away. If I'm about, I could bring in the Pen plotter as well.
* Toby C - Light up sign. clap to change the animation and program with blocks.

Norwich Science Festival 2021

2021-10-13T17:24:23Z

Percy: /* Member Projects On Display */

The day they really want us to cover is Tuesday 26th October, which is "Engineering Day".
They have offered (and Percy has suggested) the Monday 25th which is "Digitech Day".
So we need to cover 26th, and if we can cover 25th even better.

It's worth remembering that this will be half-term, so lots of excited children about.

Between 9:30am and 10:30 is advertised as "Quiet Hour" in the exploratorium, next door, so we might need to be careful with what equipment is running at this time.

At past Forum events people start drifing in around 9am till 5pm, but it's 10am till 4pm that is busy.
Ideally, we need to set up around 8am.

== Area Setup ==

Total Area 4m x 3m, two power sockets (we need to bring extention leads), wi-fi (Library and Forum,) they can provide tables.

Food / Drink wise, the Forum has an excellent coffee shop and they have never been bothered about taking cups to the stands.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally we want to move everything in as quickly as possible.

* LoRa / 4G / WiFi Gateway
* 2 x Monitors
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

Alan Childs - Setup, Everyday, all hours
Ben Norcutt - I could look at being around depending on pto I have left

== Member Projects On Display ==

* Alan C - Oscilloscope and Servo using Scratch programming

* Dan R - Laser cut violin
* Tom G - I’ll do some demo stuff with my diy 8-bit computer if you want anything else? I’ve got a line following robot too as a demo
It runs off a atmel 1288p-pu and boots straight to BASIC. The BASIC is very very basic with very few instructions and no floating point numbers.
* Barny R - I'm off work that week, so I'll either be about or i'll be away. If I'm about, I could bring in the Pen plotter as well.
* Toby C - Light up sign. clap to change the animation and program with blocks.

Norwich Science Festival 2021

2021-10-13T17:23:16Z

Percy: /* Member Attendance */

The day they really want us to cover is Tuesday 26th October, which is "Engineering Day".
They have offered (and Percy has suggested) the Monday 25th which is "Digitech Day".
So we need to cover 26th, and if we can cover 25th even better.

It's worth remembering that this will be half-term, so lots of excited children about.

Between 9:30am and 10:30 is advertised as "Quiet Hour" in the exploratorium, next door, so we might need to be careful with what equipment is running at this time.

At past Forum events people start drifing in around 9am till 5pm, but it's 10am till 4pm that is busy.
Ideally, we need to set up around 8am.

== Area Setup ==

Total Area 4m x 3m, two power sockets (we need to bring extention leads), wi-fi (Library and Forum,) they can provide tables.

Food / Drink wise, the Forum has an excellent coffee shop and they have never been bothered about taking cups to the stands.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally we want to move everything in as quickly as possible.

* LoRa / 4G / WiFi Gateway
* 2 x Monitors
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

Alan Childs - Setup, Everyday, all hours
Ben Norcutt - I could look at being around depending on pto I have left

== Member Projects On Display ==

* Dan R - Laser cut violin
* Tom G - I’ll do some demo stuff with my diy 8-bit computer if you want anything else? I’ve got a line following robot too as a demo
It runs off a atmel 1288p-pu and boots straight to BASIC. The BASIC is very very basic with very few instructions and no floating point numbers.
* Barny R - I'm off work that week, so I'll either be about or i'll be away. If I'm about, I could bring in the Pen plotter as well.
* Toby C - Light up sign. clap to change the animation and program with blocks.

Norwich Science Festival 2021

2021-10-13T16:50:23Z

Percy: /* Member Projects On Display */

The day they really want us to cover is Tuesday 26th October, which is "Engineering Day".
They have offered (and Percy has suggested) the Monday 25th which is "Digitech Day".
So we need to cover 26th, and if we can cover 25th even better.

It's worth remembering that this will be half-term, so lots of excited children about.

Between 9:30am and 10:30 is advertised as "Quiet Hour" in the exploratorium, next door, so we might need to be careful with what equipment is running at this time.

At past Forum events people start drifing in around 9am till 5pm, but it's 10am till 4pm that is busy.
Ideally, we need to set up around 8am.

== Area Setup ==

Total Area 4m x 3m, two power sockets (we need to bring extention leads), wi-fi (Library and Forum,) they can provide tables.

Food / Drink wise, the Forum has an excellent coffee shop and they have never been bothered about taking cups to the stands.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally we want to move everything in as quickly as possible.

* LoRa / 4G / WiFi Gateway
* 2 x Monitors
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

Alan Childs - Setup, Everyday, all hours

== Member Projects On Display ==

* Dan R - Laser cut violin
* Tom G - I’ll do some demo stuff with my diy 8-bit computer if you want anything else? I’ve got a line following robot too as a demo
It runs off a atmel 1288p-pu and boots straight to BASIC. The BASIC is very very basic with very few instructions and no floating point numbers.
* Barny R - I'm off work that week, so I'll either be about or i'll be away. If I'm about, I could bring in the Pen plotter as well.
* Toby C - Light up sign. clap to change the animation and program with blocks.

Norwich Science Festival 2021

2021-10-12T16:47:28Z

Percy: /* Equipment to bring on day */

The day they really want us to cover is Tuesday 26th October, which is "Engineering Day".
They have offered (and Percy has suggested) the Monday 25th which is "Digitech Day".
So we need to cover 26th, and if we can cover 25th even better.

It's worth remembering that this will be half-term, so lots of excited children about.

Between 9:30am and 10:30 is advertised as "Quiet Hour" in the exploratorium, next door, so we might need to be careful with what equipment is running at this time.

At past Forum events people start drifing in around 9am till 5pm, but it's 10am till 4pm that is busy.
Ideally, we need to set up around 8am.

== Area Setup ==

Total Area 4m x 3m, two power sockets (we need to bring extention leads), wi-fi (Library and Forum,) they can provide tables.

Food / Drink wise, the Forum has an excellent coffee shop and they have never been bothered about taking cups to the stands.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally we want to move everything in as quickly as possible.

* LoRa / 4G / WiFi Gateway
* 2 x Monitors
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

Alan Childs - Setup, Everyday, all hours

== Member Projects On Display ==

* Tom G - I’ll do some demo stuff with my diy 8-bit computer if you want anything else? I’ve got a line following robot too as a demo
It runs off a atmel 1288p-pu and boots straight to BASIC. The BASIC is very very basic with very few instructions and no floating point numbers.
* Barny R - I'm off work that week, so I'll either be about or i'll be away. If I'm about, I could bring in the Pen plotter as well.
* Toby C - Light up sign. clap to change the animation and program with blocks.

Norwich Science Festival 2021

2021-10-12T16:40:40Z

Percy:

The day they really want us to cover is Tuesday 26th October, which is "Engineering Day".
They have offered (and Percy has suggested) the Monday 25th which is "Digitech Day".
So we need to cover 26th, and if we can cover 25th even better.

It's worth remembering that this will be half-term, so lots of excited children about.

Between 9:30am and 10:30 is advertised as "Quiet Hour" in the exploratorium, next door, so we might need to be careful with what equipment is running at this time.

At past Forum events people start drifing in around 9am till 5pm, but it's 10am till 4pm that is busy.
Ideally, we need to set up around 8am.

== Area Setup ==

Total Area 4m x 3m, two power sockets (we need to bring extention leads), wi-fi (Library and Forum,) they can provide tables.

Food / Drink wise, the Forum has an excellent coffee shop and they have never been bothered about taking cups to the stands.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally we want to move everything in as quickly as possible.

* 2 x Monitors
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

Alan Childs - Setup, Everyday, all hours

== Member Projects On Display ==

* Tom G - I’ll do some demo stuff with my diy 8-bit computer if you want anything else? I’ve got a line following robot too as a demo
It runs off a atmel 1288p-pu and boots straight to BASIC. The BASIC is very very basic with very few instructions and no floating point numbers.
* Barny R - I'm off work that week, so I'll either be about or i'll be away. If I'm about, I could bring in the Pen plotter as well.
* Toby C - Light up sign. clap to change the animation and program with blocks.

Norwich Science Festival 2021

2021-10-12T16:21:22Z

Percy:

Norwich Science Festival 2021

2021-10-12T16:15:54Z

Percy:

The day they really want us to cover is Tuesday 26th October, which is "Engineering Day".
They have offered (and Percy has suggested) the Monday 25th which is "Digital Day".
So we need to cover 26th, and if we can cover 25th even better.

It's worth remembering that this will be half-term, so lots of excited children about.

At past Forum events people start drifing in around 9am till 5pm, but it's 10am till 4pm that is busy.
Ideally, we need to set up around 8am.

== Area Setup ==

Total Area 4m x 3m, two power sockets (we need to bring extention leads), wi-fi (Library and Forum,) they can provide tables.

Food / Drink wise, the Forum has an excellent coffee shop and they have never been bothered about taking cups to the stands.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally we want to move everything in as quickly as possible.

* 2 x Monitors
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

Alan Childs - Setup, Everyday, all hours

== Member Projects On Display ==

* Tom Goffy - I’ll do some demo stuff with my diy 8-bit computer if you want anything else? I’ve got a line following robot too as a demo
* Barny Relph - I'm off work that week, so I'll either be about or i'll be away. If I'm about, I could bring in the Pen plotter as well

Norwich Science Festival 2021

2021-10-12T16:07:50Z

Percy:

The day they really want us to cover is Tuesday 26th October, which is "Engineering Day".
They have offered (and Percy has suggested) the Monday 25th which is "Digital Day".
So we need to cover 26th, and if we can cover 25th even better.

== Area Setup ==

Total Area 4m x 3m, two power sockets (we need to bring extention leads), wi-fi (Library and Forum,) they can provide tables.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally we want to move everything in as quickly as possible.

* 2 x Monitors
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

Alan Childs - Setup, Everyday, all hours

== Member Projects On Display ==

* Tom Goffy - I’ll do some demo stuff with my diy 8-bit computer if you want anything else? I’ve got a line following robot too as a demo
* Barny Relph - I'm off work that week, so I'll either be about or i'll be away. If I'm about, I could bring in the Pen plotter as well

Norwich Science Festival 2021

2021-10-12T16:06:40Z

Percy:

The day they really want us to cover is Tuesday 26th October, which is "Engineering Day".
They have offered (and Percy has suggested) the Monday 25th which is "Digital Day".
So we need to cover 26th, and if we can cover 25th even better.

== Area Setup ==

Total Area 4m x 3m, two power sockets (we need to bring extention leads), wi-fi (Library and Forum,) they can provide tables.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally we want to move everything in as quickly as possible.

* 2 x Monitors
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

Alan Childs - Setup, Everyday, all hours

== Member Projects On Display ==

* Tom Goffy - I’ll do some demo stuff with my diy 8-bit computer if you want anything else? I’ve got a line following robot too as a demo

Norwich Science Festival 2021

2021-10-12T15:59:32Z

Percy: /* Volunteer Shifts */

== Area Setup ==

Total Area 4m x 3m, two power sockets (we need to bring extention leads), wi-fi (Library and Forum,) they can provide tables.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally we want to move everything in as quickly as possible.

* 2 x Monitors
* Lender Ender 3D Printer
** Spare Filament

== Member Attendance ==

Alan Childs - Setup, Everyday, all hours

== Member Projects On Display ==

* Tom Goffy - I’ll do some demo stuff with my diy 8-bit computer if you want anything else? I’ve got a line following robot too as a demo

Norwich Science Festival 2021

2021-10-12T15:58:52Z

Percy: /* Norwich Science Festival 2021 */

== Area Setup ==

Total Area 4m x 3m, two power sockets (we need to bring extention leads), wi-fi (Library and Forum,) they can provide tables.

=== Equipment to bring on day ===

It will probably be best to set this up at the Hackspace a few days ahead as everything has to be moved to the Forum either very late the day before or very early morning on the day. Ideally we want to move everything in as quickly as possible.

* 2 x Monitors
* Lender Ender 3D Printer
** Spare Filament

== Volunteer Shifts ==

Alan Childs - Everyday, all hours

== Member Projects On Display ==

* Tom Goffy - I’ll do some demo stuff with my diy 8-bit computer if you want anything else? I’ve got a line following robot too as a demo

Norwich Science Festival 2021

2021-10-12T15:55:03Z

Percy: Created page with "= Norwich Science Festival 2021 = == Volunteer Shifts == Alan Childs - Everyday, all hours == Member Projects On Display == * Tom Goffy - I’ll do some demo stuff with my..."

= Norwich Science Festival 2021 =

== Volunteer Shifts ==

Alan Childs - Everyday, all hours

== Member Projects On Display ==

* Tom Goffy - I’ll do some demo stuff with my diy 8-bit computer if you want anything else? I’ve got a line following robot too as a demo

Main Page

2021-10-12T15:52:57Z

Percy: /* Projects */

=Norwich Hackspace=

'''Welcome new members please read the [[Induction]]'''


[[File:Hackspace Covid Normal Access.png|600px|Covid access]] -->



'''NH Covid Revised Protocol post-Lockdown

Re-instatement Monday meetings 
Effective from 16 August 2021''' 

We have adjusted the [[guidelines]] in the light of the latest lockdown release. Please read via the link 

* Any questions please contact Admin Team @mario, @alan_scrase @james_m

== Hackspace subareas ==
* [[Maintainers]]
* [[Workshop]]
* [[Metal Workshop]]
* [[Laser room]]
* [[3D print Room]]
* [[HS main room]]
* [[Electronics bench]]
* [[Office]]
* [[Tuck & Tech Shop]]
* [[Slack]]

== Projects ==
===Hackspace===
* [[Norwich Science Festival 2021]]
* [[Metal workshop improvements mk1]]
* [[Lion house decorating]]
* [[Arcade machine]]
* [[In-house Retro Arcade Game Cabinet]]

===Personal===
* [[Plasma CNC]]
* [[Macro Keypad]]
* [[Car Dash Stack]]

== Permanent Store of Information ==
* [[link to Dropbox Members Norwich Hackspace]]
* [https://youtube.com/channel/UCgkhFlKMeSNe9F7EYvl9eIw link to Norwich Hackspace youtube]
* [[list of how-to guides]]
* [[list of software guides]]
* [[how to edit this wiki]]
* [[suppliers for materials]]
* [[useful or interesting links]]
* [[list of discussion or chat pages]]

== Policies ==

* [[Hackspace Insurance policies]]
* [[New member guides]]
* [[Locking-Up Process]]

== Proposals ==
* [[Proposals and decision making - open]]
* [[Proposals and decision making - closed]]

== MediaWiki Getting started ==
* Please [[READ ME]] before making changes
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Configuration_settings Configuration settings list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ]

Electronics bench

2021-05-27T11:41:40Z

Percy: /* Oscilloscope - Rigol DS1054z */

== Equipment List ==
* Soldering iron including hot air
* Desolder sucker
* 2x Full Oscilloscope
* USB Oscilliscope
* PSU (Power Supply Units)
* Wire strippers
* Crimping tools

=== Oscilloscope - Rigol DS1054z ===
This unit has been firmware upgraded from the standard model as has the higher bandwidth and trigger options.
To reset the unit to default settings, turn it on while pressing the fifth grey key on the left-hand side.

https://www.youtube.com/watch?v=W2qdtQkBKhc

Features:
* 100MHz bandwidth, 4 channels
* Vertical scale 1mV/div to 10V/div
* 7″ WVGA (800×480) TFT LCD display, 64 intensity grading levels
* Maximum sample rate 1GSa/s
* Memory depth of 24Mpts
* Serial, SPI, and I2C Decoding
* Advanced Triggers

Electronics bench

2021-05-27T11:40:32Z

Percy: /* Equipment List */

== Equipment List ==
* Soldering iron including hot air
* Desolder sucker
* 2x Full Oscilloscope
* USB Oscilliscope
* PSU (Power Supply Units)
* Wire strippers
* Crimping tools

=== Oscilloscope - Rigol DS1054z ===
This unit has been upgraded from the standard model.
To reset the unit to default, turn on while pressing the fifth grey key on left hand side.

https://www.youtube.com/watch?v=W2qdtQkBKhc

Features:
* 100MHz bandwidth, 4 channels
* Vertical scale 1mV/div to 10V/div
* 7″ WVGA (800×480) TFT LCD display, 64 intensity grading levels
* Maximum sample rate 1GSa/s
* Memory depth of 24Mpts
* Serial, SPI, and I2C Decoding
* Advanced Triggers

Electronics bench

2021-05-27T11:39:51Z

Percy:

== Equipment List ==
* Soldering iron including hot air
* Desolder sucker
* 2x Full Oscilloscope
* USB Oscilliscope
* PSU (Power Supply Units)
* Wire strippers
* Crimping tools

=== Oscilloscope - Rigol DS1054z ===
This unit has been upgraded from the standard model.
To reset the unit to default, turn on while pressing the fifth grey key on left hand side.

https://www.youtube.com/watch?v=W2qdtQkBKhc

Features:
100MHz bandwidth, 4 channels
Vertical scale 1mV/div to 10V/div
7″ WVGA (800×480) TFT LCD display, 64 intensity grading levels
Maximum sample rate 1GSa/s
Memory depth of 24Mpts
Serial, SPI, and I2C Decoding
Advanced Triggers

Slack

2021-04-29T23:23:57Z

Percy: /* The Lion Bot */

== The Lion Bot ==

Slack integration for Hackspace automation.
Norwich Hackspace's very own bot. The name Lion is a reference to our current Lion House premises.
It also makes an initialism of Lion house Integration Online Network, if you like that sort of thing.

Unlike the standard Slackbot which depends on direct forward-slash commands, The Lion Bot is designed to use natural language commands to control various aspects of the Hackspace.
While the commands given here are specific, you can try variations such that...
* In
* I'm in
* I am now here
* I just got in
will all result in updating The Lion Bot with the information that you are now in the Hackspace.

The bot has been started by member Alan Percy Childs but is shared on our Github group page for member code contributions -> https://github.com/NorwichHackSpace/TheLionBot

It currently runs on a server controlled by Alan, but we plan on making it more accessible for members soon.

=== Commands ===
You can currently ask these in a Direct Message, in #general, #wiki, #who-is-in-the-space, #doorbot, or #home-automation
The bot will also post numerous updates, of various importance, in the #lion-status channel, where a few special commands can be given.

==== Who is In? ====
Returns the name of the user last recorded as being "in" or tells you Lion House is empty.

==== I am in/out ====
Tell the Lion you are inside or have left the Hackspace.
The bot will only remember your name until you say you are out and doesn't worry about how long you are in for.

You can also use "Percy is in" if you want to assign someone else as being in the space; for example, if you are leaving but want to record that someone else is still inside the space instead.

Lastly, "Everyone out" will register the hackspace as being empty.

==== Is the door locked? ====
Using the #door-status room, the bot will keep an eye on the door being locked or unlocked and allow you to check without joinng that channel.
You can also use a few variations like "is the hackspace open."
Later, we shall program the Lion to check if the door is left unlocked for more than a few minutes and ping the last "in" user to check it.

==== Who am I? ====
If you are facing an identity crisis, this may be useful.
It's mostly a way for members to have a go at adding a few of their own responses.

==== lion:reconnect ====
Only works in the #lion-status channel. If the Lion starts playing up this is a special 'turn it off and on again' command.

=== Feature Requests ===
* Voice Alert when you enter the hackspace without checking into Slack. ~Alan Scrase
* Multiple users can be in at once and listed when asked Who is in. ~
* Message in Slack when a Wiki page is changed or created. ~Alan Childs
** Only post in #Wiki if detected strange activity or multiple new users or edits are detected in a short period.
* Check who was last in ~Alan Childs
* Interact with Booking System
** Create, change, delete a booking
** Check when someone next in

Slack

2021-01-18T20:32:15Z

Percy: /* Feature Requests */

== The Lion Bot ==

Slack integration for Hackspace automation.
Norwich Hackspace's very own bot. The name Lion is a reference to our current Lion House premises.
It also makes an initialism of Lion house Integration Online Network, if you like that sort of thing.

Unlike the standard Slackbot which depends on direct forward-slash commands, The Lion Bot is designed to use natural language commands to control various aspects of the Hackspace.
While the commands given here are specific, you can try variations such that...
* In
* I'm in
* I am now here
* I just got in
will all result in updating The Lion Bot with the information that you are now in the Hackspace.

The bot has been started by member Alan Percy Childs but is shared on our Github group page for member code contributions -> https://github.com/NorwichHackSpace/TheLionBot

It currently runs on a server controlled by Alan, but we plan on making it more accessible for members soon.

=== Commands ===
You can currently ask these in a Direct Message, in #who-is-in-the-space, #doorbot, or #home-automation

==== Who is In? ====
Returns the name of the user last recorded as being "in" or tells you Lion House is empty.

==== I am in/out ====
Tell the Lion you are inside or have left the Hackspace.
The bot will only remember your name until you say you are out and doesn't worry about how long you are in for.

You can also use "Percy is in" if you want to assign someone else as being in the space; for example, if you are leaving but want to record that someone else is still inside the space instead.

Lastly, "Everyone out" will register the hackspace as being empty.

==== Is the door locked? ====
Using the #door-status room, the bot will keep an eye on the door being locked or unlocked and allow you to check without joinng that channel.
You can also use a few variations like "is the hackspace open."
Later, we shall program the Lion to check if the door is left unlocked for more than a few minutes and ping the last "in" user to check it.

==== Who am I? ====
If you are facing an identity crisis, this may be useful.
It's mostly a way for members to have a go at adding a few of their own responses.

=== Feature Requests ===
* Voice Alert when you enter the hackspace without checking into Slack. ~Alan Scrase
* Multiple users can be in at once and listed when asked Who is in. ~
* Message in Slack when a Wiki page is changed or created. ~Alan Childs
* Check who was last in ~Alan Childs
* Interact with Booking System
** Create, change, delete booking
** Check when someone next in

Slack

2021-01-18T20:09:20Z

Percy:

== The Lion Bot ==

Slack integration for Hackspace automation.
Norwich Hackspace's very own bot. The name Lion is a reference to our current Lion House premises.
It also makes an initialism of Lion house Integration Online Network, if you like that sort of thing.

Unlike the standard Slackbot which depends on direct forward-slash commands, The Lion Bot is designed to use natural language commands to control various aspects of the Hackspace.
While the commands given here are specific, you can try variations such that...
* In
* I'm in
* I am now here
* I just got in
will all result in updating The Lion Bot with the information that you are now in the Hackspace.

The bot has been started by member Alan Percy Childs but is shared on our Github group page for member code contributions -> https://github.com/NorwichHackSpace/TheLionBot

It currently runs on a server controlled by Alan, but we plan on making it more accessible for members soon.

=== Commands ===
You can currently ask these in a Direct Message, in #who-is-in-the-space, #doorbot, or #home-automation

==== Who is In? ====
Returns the name of the user last recorded as being "in" or tells you Lion House is empty.

==== I am in/out ====
Tell the Lion you are inside or have left the Hackspace.
The bot will only remember your name until you say you are out and doesn't worry about how long you are in for.

You can also use "Percy is in" if you want to assign someone else as being in the space; for example, if you are leaving but want to record that someone else is still inside the space instead.

Lastly, "Everyone out" will register the hackspace as being empty.

==== Is the door locked? ====
Using the #door-status room, the bot will keep an eye on the door being locked or unlocked and allow you to check without joinng that channel.
You can also use a few variations like "is the hackspace open."
Later, we shall program the Lion to check if the door is left unlocked for more than a few minutes and ping the last "in" user to check it.

==== Who am I? ====
If you are facing an identity crisis, this may be useful.
It's mostly a way for members to have a go at adding a few of their own responses.

=== Feature Requests ===
* Voice Alert when you enter the hackspace without checking into Slack. ~Alan Scrase
* Multiple users can be in at once and listed when asked Who is in. ~

Slack

2020-12-10T00:29:17Z

Percy: /* Commands */

== The Lion Bot ==

Slack integration for Hackspace automation.
Norwich Hackspace's very own bot. The name Lion is a reference to our current Lion House premises.
It also makes an initialism of Lion house Integration Online Network, if you like that sort of thing.

Unlike the standard Slackbot which depends on direct forward-slash commands, The Lion Bot is designed to use natural language commands to control various aspects of the Hackspace.
While the commands given here are specific, you can try variations such that...
* In
* I'm in
* I am now here
* I just got in
will all result in updating The Lion Bot with the information that you are now in the Hackspace.

The bot has been started by member Alan Percy Childs but is shared on our Github group page for member code contributions -> https://github.com/NorwichHackSpace/TheLionBot

It currently runs on a server controlled by Alan, but we plan on making it more accessible for members soon.

=== Commands ===
You can currently ask these in a Direct Message, in #who-is-in-the-space, #doorbot, or #home-automation

==== Who is In? ====
Returns the name of the user last recorded as being "in" or tells you Lion House is empty.

==== I am in/out ====
Tell the Lion you are inside or have left the Hackspace.
The bot will only remember your name until you say you are out and doesn't worry about how long you are in for.

You can also use "Percy is in" if you want to assign someone else as being in the space; for example, if you are leaving but want to record that someone else is still inside the space instead.

Lastly, "Everyone out" will register the hackspace as being empty.

==== Is the door locked? ====
Using the #door-status room, the bot will keep an eye on the door being locked or unlocked and allow you to check without joinng that channel.
You can also use a few variations like "is the hackspace open."
Later, we shall program the Lion to check if the door is left unlocked for more than a few minutes and ping the last "in" user to check it.

==== Who am I? ====
If you are facing an identity crisis, this may be useful.
It's mostly a way for members to have a go at adding a few of their own responses.

Slack

2020-12-10T00:29:03Z

Percy:

== The Lion Bot ==

Slack integration for Hackspace automation.
Norwich Hackspace's very own bot. The name Lion is a reference to our current Lion House premises.
It also makes an initialism of Lion house Integration Online Network, if you like that sort of thing.

Unlike the standard Slackbot which depends on direct forward-slash commands, The Lion Bot is designed to use natural language commands to control various aspects of the Hackspace.
While the commands given here are specific, you can try variations such that...
* In
* I'm in
* I am now here
* I just got in
will all result in updating The Lion Bot with the information that you are now in the Hackspace.

The bot has been started by member Alan Percy Childs but is shared on our Github group page for member code contributions -> https://github.com/NorwichHackSpace/TheLionBot

It currently runs on a server controlled by Alan, but we plan on making it more accessible for members soon.

=== Commands ===
You can currently ask these in a Direct Message, in #who-is-in-the-space, #doorbot, or #home-automation

==== Who is In? ====
Returns the name of the user last recorded as being "in" or tells you Lion House is empty.

==== I am in/out ====
Tell the Lion you are inside or have left the Hackspace.
The bot will only remember your name until you say you are out and doesn't worry about how long you are in for.

You can also use "Percy is in" if you want to assign someone else as being in the space; for example, if you are leaving but want to record that someone else is still inside the space instead.

Lastly, "Everyone out" will register the hackspace as being empty.

==== Is the door locked? ====
Using the #door-status room, the bot will keep an eye on the door being locked or unlocked and allow you to check without joinng that channel.
You can also use a few variations like "is the hackspace open."
Later, we shall program the Lion to check if the door is left unlocked for more than a few minutes and ping the last "in" user to check it.

==== Who am I? ====
If you are facing an identity crisis, this may be useful.
It's mostly a way for members to have a go at adding a few of their own responses.

Main Page

2020-12-10T00:27:23Z

Percy:

=Norwich Hackspace=

'''Welcome new members please read the [[Induction]]'''

Updated access policy post Covid Lockdown 2
 
<gallery>
Hackspace Covid Access.png|Covid Rules
</gallery>

'''NH Covid Revised Protocol post-Lockdown

Effective from Monday 7 December 2020'''

We have adjusted the [[guidelines]] in the light of the latest lockdown release. Please read via the link

* Any questions please contact Admin Team @mario, @alan_scrase @james_m

== Hackspace subareas ==
* [[Workshop]]
* [[Metal Workshop]]
* [[Laser room]]
* [[3D print Room]]
* [[HS main room]]
* [[Office]]
* [[Tuck & Tech Shop]]
* [[Slack]]

== Projects ==
===Hackspace===
* [[Metal workshop improvements mk1]]
* [[Lion house decorating]]

===Personal===
* [[Plasma CNC]]

== Permanent Store of Information ==
* [[list of how-to guides]]
* [[list of software guides]]
* [[how to edit this wiki]]
* [[suppliers for materials]]
* [[useful or interesting links]]
* [[list of discussion or chat pages]]

== Policies ==

Place for general policies 

[[Hackspace Insurance policies]] 

[[New member guides]] 

== Proposals ==
* [[Proposals and decision making - open]]
* [[Proposals and decision making - closed]]

== MediaWiki Getting started ==
* Please [[READ ME]] before making changes
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:Configuration_settings Configuration settings list]
* [https://www.mediawiki.org/wiki/Special:MyLanguage/Manual:FAQ MediaWiki FAQ]

Slack

2020-12-10T00:26:25Z

Percy: Created page with "== The Lion Bot == Slack integration for Hackspace automation. Norwich Hackspace's very own bot. The name Lion is a reference to our current Lion House premises. It also ma..."

== The Lion Bot ==

Slack integration for Hackspace automation.
Norwich Hackspace's very own bot. The name Lion is a reference to our current Lion House premises.
It also makes a initialism of Lion house Integration Online Network, if you like that sort of thing.

Unlike the standard Slackbot which depends on direct forward slash commands, The Lion Bot is designed to use natural language commands to control various aspects of the Hackspace.
While the commands given here are specific, you can try variations such that...
* In
* I'm in
* I am now here
* I just got in
will all result in updating The Lion Bot with the information that you are now in the Hackspace.

The bot has been started by member Alan Percy Childs but is shared on our Github group page for member code contributions -> https://github.com/NorwichHackSpace/TheLionBot

It currently runs on a server controlled by Alan, but we plan on making it more accessible for members soon.

=== Commands ===

==== Who is In? ====
Returns the name of the user last recorded as being "in" or tells you Lion House is empty.

==== I am in/out ====
Tell the Lion you are inside or have left the Hackspace.
The bot will only remember your name until you say you are out and doesn't worry about how long you are in for.

You can also use "Percy is in" if you want to assign someone else as being in the space; for example, if you are leaving but want to record that someone else is still inside the space instead.

Lastly, "Everyone out" will register the hackspace as being empty.

==== Is the door locked? ====
Using the #door-status room, the bot will keep an eye on the door being locked or unlocked and allow you to check without joinng that channel.
You can also use a few variations like "is the hackspace open."
Later, we shall program the Lion to check if the door is left unlocked for more than a few minutes and ping the last "in" user to check it.

==== Who am I? ====
If you are facing an identity crisis, this may be useful.
It's mostly a way for members to have a go at adding a few of their own responses.

Temporary lasercutter booking page

2020-10-25T00:53:34Z

Percy:

future: not booked

==Sun 25th Oct 2020==

==Mon 26th Oct 2020==
=== 7pm to 9pm ===
Open Session
~User name

==Tue 27th Oct 2020==

==also==
i'm happy to make some crappy PHP / database page for booking stuff. No login etc required. ~Nic

Temporary lasercutter booking page

2020-10-25T00:53:15Z

Percy:

future: not booked

==Sun 25th Oct 2020==

==Mon 26th Oct 2020==
=== 7pm to 9pm ===
Open Session
~User name

==Tue 27th Oct 2020==

====also====
i'm happy to make some crappy PHP / database page for booking stuff. No login etc required. ~Nic

Temporary lasercutter booking page

2020-10-25T00:52:52Z

Percy:

future: not booked

==Sun 25th Oct 2020==

==Mon 26th Oct 2020==
=== 7pm to 9pm ===
Open Session
~User name

=Tue 27th Oct 2020=

===also===
i'm happy to make some crappy PHP / database page for booking stuff. No login etc required.

User:Percy

2020-09-26T16:29:10Z

Percy:

= About Me =
Melt plastic into werid shapes; sometimes I stick wires in and make it do stuff. Working on Batdar.

== My Project Notes ==

== My Favorite Pages ==

== Pages I'm Making ==
https://wiki.norwichhackspace.org/index.php?title=Stock-SMD

User:Percy

2020-09-26T16:27:30Z

Percy:

User:Percy

2020-09-22T18:09:09Z

Percy:

= About Me =
Melt plastic into werid shapes; sometimes I stick wires in and make it do stuff. Working on Batdar.

== My Project Notes ==

== My Favorite Pages ==

== Pages I'm Making ==
https://wiki.norwichhackspace.org/index.php?title=Stock-SMD

Stock-SMD

2020-09-22T18:07:39Z

Percy: Created page with "= SMD Stocklist = Sandboxed by Percy September 22nd, 2020. {| class="wikitable" |- ! Component !! Size !! Value !! Description |- | Example || Example || Example || Example |..."

= SMD Stocklist =
Sandboxed by Percy September 22nd, 2020.

{| class="wikitable"
|-
! Component !! Size !! Value !! Description
|-
| Example || Example || Example || Example
|-
| Example || Example || Example || Example
|-
| Example || Example || Example || Example
|}

== Resisters ==
=== 0806 ===
=== 1206 ===

== Capacitors ==
=== 1206 ===

User:Percy

2020-09-22T17:57:42Z

Percy: Created page with "Melt plastic into werid shapes; sometimes I stick wires in and make it do stuff. Working on Batdar."

Melt plastic into werid shapes; sometimes I stick wires in and make it do stuff. Working on Batdar.